Comment 15 for bug 109629

This bug is apparently not very important. Anyone knows which kernel/dists that *do* work? I can't run much longer with this...

Now the network timeout halted the system long enough to shut down my raid:

[608679.074481] NETDEV WATCHDOG: eth0: transmit timed out
[608679.074490] eth0: transmit timed out, tx_status 00 status e000.
[608679.074499] diagnostics: net 0cc0 media 8802 dma 00a00021 fifo 8800
[608679.074507] Flags; bus-master 1, dirty 40617982(14) current 40617998(14)
[608679.074511] Transmit list 7bea4ac0 vs. ffff81007bea4ac0.
...
[608679.074571] eth0: Resetting the Tx ring pointer.
[608680.580930] ata7.01: qc timeout (cmd 0xef)
[608680.580943] ata7.01: failed to set xfermode (err_mask=0x4)
[608680.580948] ata7.01: disabled
[608681.084387] ata7: EH complete
[608681.088767] VFS: busy inodes on changed media.
[608681.089671] VFS: busy inodes on changed media.
[608687.622840] ata5.00: qc timeout (cmd 0x27)
[608687.622851] ata5.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 0
[608687.622863] ata5.00: failed to set xfermode (err_mask=0x40)
[608687.622867] ata5.00: disabled
[608688.126318] ata5: EH complete
[608688.126382] sd 4:0:0:0: SCSI error: return code = 0x00040000
[608688.126386] end_request: I/O error, dev sdc, sector 862369017
[608688.126397] md: super_written gets error=-5, uptodate=0
[608688.126402] raid1: Disk failure on sdc3, disabling device.
[608688.126404] Operation continuing on 1 devices
[608688.126431] sd 4:0:0:0: SCSI error: return code = 0x00040000
[608688.126434] end_request: I/O error, dev sdc, sector 10312065
[608688.126520] EXT3-fs error (device md0): read_inode_bitmap: Cannot read inod
e bitmap - block_group = 28, inode_bitmap = 917505
[608688.127978] sdc : READ CAPACITY failed.
[608688.127980] sdc : status=0, message=00, host=4, driver=00
[608688.127983] sdc : sense not available.
[608688.128338] sdc: Write Protect is off
[608688.128341] sdc: Mode Sense: 00 00 00 00
[608688.128575] sdc: asking for cache data failed
[608688.128578] sdc: assuming drive cache: write through
[608688.148540] RAID1 conf printout:
[608688.148546] --- wd:1 rd:2
[608688.148549] disk 0, wo:1, o:0, dev:sdc3
[608688.148552] disk 1, wo:0, o:1, dev:sda3

Arrrg!