$ uname -r 2.6.28-13-generic HP Compaq 6735b
I've found interesting thing. After restart with original 72-acpi-pain.sh and 99laptop-mode files i've got <polling disabled>.
Right after start-up (fan is almost silent) <setting not supported> <polling disabled> state: active[2] temperature: 68 C critical (S5): 105 C passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1 active[0]: 90 C: devices=FAN0 active[1]: 80 C: devices=FAN1 active[2]: 55 C: devices=FAN2 active[3]: 45 C: devices=FAN3 active[4]: 35 C: devices=FAN4
After stand-by (fan spin up) <setting not supported> <polling disabled> state: active[2] temperature: 67 C critical (S5): 105 C passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1 active[0]: 90 C: devices=FAN0 active[1]: 80 C: devices=FAN1 active[2]: 55 C: devices=FAN2 active[3]: 45 C: devices=FAN3 active[4]: 35 C: devices=FAN4
After few minutes (fan is still spin up) <setting not supported> <polling disabled> state: active[2] temperature: 48 C critical (S5): 105 C passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1 active[0]: 90 C: devices=FAN0 active[1]: 80 C: devices=FAN1 active[2]: 55 C: devices=FAN2 active[3]: 45 C: devices=FAN3 active[4]: 35 C: devices=FAN4
Next i've added echo -n 3 > /proc/acpi/thermal_zone/CPUZ/polling_frequency to /etc/pm/sleep.d/99laptop-mode,
After next stand-by (fan spin up) <setting not supported> polling frequency: 3 seconds state: active[2] temperature: 55 C critical (S5): 105 C passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1 active[0]: 90 C: devices=FAN0 active[1]: 80 C: devices=FAN1 active[2]: 55 C: devices=FAN2 active[3]: 45 C: devices=FAN3 active[4]: 35 C: devices=FAN4
But a few minuts later i've got this report (and fan is silent) <setting not supported> polling frequency: 3 seconds state: active[3] temperature: 53 C critical (S5): 105 C passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1 active[0]: 90 C: devices=FAN0 active[1]: 80 C: devices=FAN1 active[2]: 55 C: devices=FAN2 active[3]: 45 C: devices=FAN3 active[4]: 35 C: devices=FAN4
...and it looks to work :)
$ uname -r
2.6.28-13-generic
HP Compaq 6735b
I've found interesting thing. After restart with original 72-acpi-pain.sh and 99laptop-mode files i've got <polling disabled>.
Right after start-up (fan is almost silent)
<setting not supported>
<polling disabled>
state: active[2]
temperature: 68 C
critical (S5): 105 C
passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1
active[0]: 90 C: devices=FAN0
active[1]: 80 C: devices=FAN1
active[2]: 55 C: devices=FAN2
active[3]: 45 C: devices=FAN3
active[4]: 35 C: devices=FAN4
After stand-by (fan spin up)
<setting not supported>
<polling disabled>
state: active[2]
temperature: 67 C
critical (S5): 105 C
passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1
active[0]: 90 C: devices=FAN0
active[1]: 80 C: devices=FAN1
active[2]: 55 C: devices=FAN2
active[3]: 45 C: devices=FAN3
active[4]: 35 C: devices=FAN4
After few minutes (fan is still spin up)
<setting not supported>
<polling disabled>
state: active[2]
temperature: 48 C
critical (S5): 105 C
passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1
active[0]: 90 C: devices=FAN0
active[1]: 80 C: devices=FAN1
active[2]: 55 C: devices=FAN2
active[3]: 45 C: devices=FAN3
active[4]: 35 C: devices=FAN4
Next i've added thermal_ zone/CPUZ/ polling_ frequency sleep.d/ 99laptop- mode,
echo -n 3 > /proc/acpi/
to /etc/pm/
After next stand-by (fan spin up)
<setting not supported>
polling frequency: 3 seconds
state: active[2]
temperature: 55 C
critical (S5): 105 C
passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1
active[0]: 90 C: devices=FAN0
active[1]: 80 C: devices=FAN1
active[2]: 55 C: devices=FAN2
active[3]: 45 C: devices=FAN3
active[4]: 35 C: devices=FAN4
But a few minuts later i've got this report (and fan is silent)
<setting not supported>
polling frequency: 3 seconds
state: active[3]
temperature: 53 C
critical (S5): 105 C
passive: 100 C: tc1=1 tc2=2 tsp=100 devices=CPU0 CPU1
active[0]: 90 C: devices=FAN0
active[1]: 80 C: devices=FAN1
active[2]: 55 C: devices=FAN2
active[3]: 45 C: devices=FAN3
active[4]: 35 C: devices=FAN4
...and it looks to work :)