Package: kernel-image-2.4.27-1-686
Version: 2.4.27-1
Severity: important
With kernel 2.4.23-1-686, my disk on my Promise IDE controler shows up
as hde and works fine.
With kernel 2.4.27-1-686, the disk is not detected.
lspci -v output:
0000:02:0b.0 Unknown mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100 TX2) (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 11
I/O ports at d4f8 [size=8]
I/O ports at d4f0 [size=4]
I/O ports at d4e0 [size=8]
I/O ports at d4d8 [size=4]
I/O ports at d4c0 [size=16]
Memory at faff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fb000000 [disabled] [size=16K] Capabilities: [60] Power Management version 1
lspci -n output:
0000:02:0b.0 0180: 105a:4d68 (rev 02)
I tried adding pdc202xx_new to /etc/modules and rebooting, but it
appears that the controler is probed added after the ide disk
detection is already complete.
Versions of packages kernel-image-2.4.27-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii initrd-tools 0.1.73 tools to create initrd image for p
ii modutils 2.4.26-1 Linux module utilities
Package: kernel- image-2. 4.27-1- 686
Version: 2.4.27-1
Severity: important
With kernel 2.4.23-1-686, my disk on my Promise IDE controler shows up
as hde and works fine.
With kernel 2.4.27-1-686, the disk is not detected.
lspci -v output:
0000:02:0b.0 Unknown mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100 TX2) (rev 02) (prog-if 85)
Capabilities: [60] Power Management version 1
Subsystem: Promise Technology, Inc. Ultra100TX2
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 11
I/O ports at d4f8 [size=8]
I/O ports at d4f0 [size=4]
I/O ports at d4e0 [size=8]
I/O ports at d4d8 [size=4]
I/O ports at d4c0 [size=16]
Memory at faff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fb000000 [disabled] [size=16K]
lspci -n output:
0000:02:0b.0 0180: 105a:4d68 (rev 02)
I tried adding pdc202xx_new to /etc/modules and rebooting, but it
appears that the controler is probed added after the ide disk
detection is already complete.
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.23-1-686
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel- image-2. 4.27-1- 686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii initrd-tools 0.1.73 tools to create initrd image for p
ii modutils 2.4.26-1 Linux module utilities
-- no debconf information