ASUS P5Q-E motherboard, two on-board Marvell ethernet adapters, neither of which works. lspci -v output: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: ASUSTeK Computer Inc. Device 81f8 Flags: bus master, fast devsel, latency 0, IRQ 219 Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] I/O ports at c800 [size=256] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [e0] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: sky2 I have tried the sk98lin driver but this does not work either. hwinfo: 13: PCI 200.0: 0200 Ethernet controller [Created at pci.310] UDI: /org/freedesktop/Hal/devices/pci_11ab_4364 Unique ID: mY_N.lJIN+p5NzvB Parent ID: HnsE.cl8tOgOWATC SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Marvell 88E8056 PCI-E Gigabit Ethernet Controller" Vendor: pci 0x11ab "Marvell Technology Group Ltd." Device: pci 0x4364 "88E8056 PCI-E Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x81f8 Revision: 0x12 Driver: "sky2" Driver Modules: "sky2" Device File: eth2 Memory Range: 0xfe9fc000-0xfe9fffff (rw,non-prefetchable) I/O Ports: 0xc800-0xc8ff (rw) Memory Range: 0xfe9c0000-0xfe9dffff (ro,prefetchable,disabled) IRQ: 219 (1 event) HW Address: 00:22:15:63:bb:6f Module Alias: "pci:v000011ABd00004364sv00001043sd000081F8bc02sc00i00" Driver Info #0: Driver Status: sky2 is active Driver Activation Cmd: "modprobe sky2"
ASUS P5Q-E motherboard, two on-board Marvell ethernet adapters, neither of which works. p/Hal/devices/ pci_11ab_ 4364 pci0000: 00/0000: 00:1c.5/ 0000:02: 00.0 0xfe9fffff (rw,non- prefetchable) 0xfe9dffff (ro,prefetchabl e,disabled) 00004364sv00001 043sd000081F8bc 02sc00i00"
lspci -v output:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: ASUSTeK Computer Inc. Device 81f8
Flags: bus master, fast devsel, latency 0, IRQ 219
Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at c800 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data <?>
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: sky2
I have tried the sk98lin driver but this does not work either.
hwinfo:
13: PCI 200.0: 0200 Ethernet controller
[Created at pci.310]
UDI: /org/freedeskto
Unique ID: mY_N.lJIN+p5NzvB
Parent ID: HnsE.cl8tOgOWATC
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Marvell 88E8056 PCI-E Gigabit Ethernet Controller"
Vendor: pci 0x11ab "Marvell Technology Group Ltd."
Device: pci 0x4364 "88E8056 PCI-E Gigabit Ethernet Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x81f8
Revision: 0x12
Driver: "sky2"
Driver Modules: "sky2"
Device File: eth2
Memory Range: 0xfe9fc000-
I/O Ports: 0xc800-0xc8ff (rw)
Memory Range: 0xfe9c0000-
IRQ: 219 (1 event)
HW Address: 00:22:15:63:bb:6f
Module Alias: "pci:v000011ABd
Driver Info #0:
Driver Status: sky2 is active
Driver Activation Cmd: "modprobe sky2"