Hmm, doesn't appear to be fixed yet on Dapper linux-2.6.15.26-386 yet. `iwlist scanning` still returns no results?
-----------------------------------------
tail -f /var/log/messages shows:
Jul 24 14:23:53 localhost kernel: [17179839.608000] pccard: CardBus card inserted into slot 0
Jul 24 14:23:53 localhost kernel: [17179839.608000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
Jul 24 14:23:53 localhost kernel: [17179839.608000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Jul 24 14:23:53 localhost kernel: [17179839.608000] acx: found ACX111-based wireless network card at 0000:03:00.0, irq:10, phymem1:0x34020000, phymem2:0x34000000, mem1:0xe0c3c000, mem1_size:8192, mem2:0xe0d00000, mem2_size:131072
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: firmware 'Rev 2.3.1.31' does not work well with this driver
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101)
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx v0.3.21: net device wlan0, driver compiled against wireless extensions 19 and Linux 2.6.15-26-386
Jul 24 14:23:55 localhost kernel: [17179840.864000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
---------------------------------------
lspci -vv outputs:
0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
Subsystem: D-Link System Inc DWL-G650+ AirPlusG+ CardBus Wireless LAN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 34020000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 34000000 (32-bit, non-prefetchable) [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Hmm, doesn't appear to be fixed yet on Dapper linux-2.6.15.26-386 yet. `iwlist scanning` still returns no results? ------- ------- ------- ------- ------
-------
tail -f /var/log/messages shows:
Jul 24 14:23:53 localhost kernel: [17179839.608000] pccard: CardBus card inserted into slot 0 NETDEV_ UP): wlan0: link is not ready ------- ------- ------- ------- ----
Jul 24 14:23:53 localhost kernel: [17179839.608000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
Jul 24 14:23:53 localhost kernel: [17179839.608000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Jul 24 14:23:53 localhost kernel: [17179839.608000] acx: found ACX111-based wireless network card at 0000:03:00.0, irq:10, phymem1:0x34020000, phymem2:0x34000000, mem1:0xe0c3c000, mem1_size:8192, mem2:0xe0d00000, mem2_size:131072
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: firmware 'Rev 2.3.1.31' does not work well with this driver
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101)
Jul 24 14:23:54 localhost kernel: [17179840.380000] acx v0.3.21: net device wlan0, driver compiled against wireless extensions 19 and Linux 2.6.15-26-386
Jul 24 14:23:55 localhost kernel: [17179840.864000] ADDRCONF(
-------
lspci -vv outputs:
0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+ ,D1+,D2+ ,D3hot+ ,D3cold- )
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Subsystem: D-Link System Inc DWL-G650+ AirPlusG+ CardBus Wireless LAN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 34020000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 34000000 (32-bit, non-prefetchable) [size=128K]