jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-16)

Bug #1965308 reported by Juerg Haefliger
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux-raspi (Ubuntu)
Fix Released
Undecided
Unassigned
Jammy
Fix Released
Undecided
Unassigned

Bug Description

Upstream raspberrypi patchset 2022-03-16

  Ported from the following raspberrypi branch:
    rpi-5.15.y
  from https://github.com/raspberrypi/linux.git

drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host
drm: Include drm_connector.h from drm_panel.h
drm/panel: Add prepare_upstream_first flag to drm_panel
drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
Revert "drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order"
Revert "drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure DSI host"
ARM: dts: bcm2711-rpi-ds: Disable the BCM2835 STC

Tags: kern-2730
Juerg Haefliger (juergh)
Changed in linux-raspi (Ubuntu):
status: New → Confirmed
description: updated
Juerg Haefliger (juergh)
Changed in linux-raspi (Ubuntu Jammy):
status: Confirmed → Fix Committed
tags: added: kern-2730
Juerg Haefliger (juergh)
summary: jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y
- (2022-03-17)
+ (2022-03-16)
description: updated
Revision history for this message
Launchpad Janitor (janitor) wrote :
Download full text (72.7 KiB)

This bug was fixed in the package linux-raspi - 5.15.0-1004.4

---------------
linux-raspi (5.15.0-1004.4) jammy; urgency=medium

  * jammy/linux-raspi: 5.15.0-1004.4 -proposed tracker (LP: #1965283)

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-16)
    (LP: #1965308)
    - ARM: dts: bcm2711-rpi-ds: Disable the BCM2835 STC
    - Revert "drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure
      DSI host"
    - Revert "drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init
      order"
    - drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
    - drm/panel: Add prepare_upstream_first flag to drm_panel
    - drm: Include drm_connector.h from drm_panel.h
    - drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08)
    (LP: #1964144)
    - drm/vc4: hdmi: Make sure the device is powered with CEC
    - overlays: rpi-poe(-plus): Fix parameters
    - dtoverlays: fix overrides in vc4-kms-dpi-generic
    - dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic
    - media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
    - drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
    - dtoverlays: Add additional mappings to vc4-kms-dpi-generic
    - drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order
    - drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
    - drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
    - drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure DSI
      host
    - drm/vc4: Rename bridge to out_bridge
    - drm/vc4: Move DSI initialisation to encoder_mode_set.
    - drm/vc4: Remove splitting the bridge chain from the driver.
    - drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
    - drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
    - drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
    - usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
    - dtoverlays: Correct link frequency for ov7251
    - media: i2c: Add acpi support to ov7251
    - media: i2c: Provide ov7251_check_hwcfg()
    - media: i2c: Add ov7251_pll_configure()
    - media: i2c: Add support for 19.2MHz clock to ov7251
    - media: i2c: Add ov7251_detect_chip()
    - media: i2c: Add pm_runtime support to ov7251
    - media: i2c: Remove .s_power() from ov7251
    - media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
    - media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed
    - media: i2c: ov7251: V4L2_CID_LINK_FREQUENCY is fixed
    - media: i2c: ov7251: Initialise current_mode during probe
    - media: i2c: ov7251: Add V4L2_CID_HBLANK control
    - media: i2c: ov7251: Do not reset gain on mode change
    - media: i2c: ov7251: Fix link_freq validation loop
    - media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS,
      CROP_DEFAULT
    - media: i2c: ov7251: Set VTS instead of having full tables for FPS.
    - media: i2c: ov7251: Limit exposure based o...

Changed in linux-raspi (Ubuntu Jammy):
status: Fix Committed → Fix Released
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.