jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08)
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-raspi (Ubuntu) |
Fix Released
|
Undecided
|
Unassigned | ||
Jammy |
Fix Released
|
Undecided
|
Unassigned |
Bug Description
Upstream raspberrypi patchset 2022-03-08
Ported from the following raspberrypi branch:
rpi-5.15.y
from https:/
drm/vc4: txp: Force alpha to be 0xff if it's disabled
drm/vc4: txp: Don't set TXP_VSTART_AT_EOF
drm/vc4: kms: Improve logging
drm/vc4: kms: Warn if we have an incompatible muxing setup
drm/vc4: kms: Store channel in local variable
drm/vc4: hvs: Reset muxes at probe time
staging: vc04_services: codec: Add support for V4L2_PIX_FMT_RGBA32 format
drm/vc4: Fix out of order frames during asynchronous page flips
drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on stop_streaming
staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs
staging/vc-sm-cma: Avoid log spamming on Pi0/1 over cache alias.
defconfigs: Add OV2311 image sensor to Pi defconfigs
dtoverlays: Add overlay for Omnivision OV2311 image sensor
media/i2c: Add driver for Omnivision OV2311
usb: xhci: expand the scope of XHCI_VLI_
usb: xhci: rework XHCI_VLI_
configs: Add CONFIG_
overlays: Add "drm" parameter to pitft35-resistive
overlays: Overlays for WaveShare 2-Chan CAN FD HAT
overlays:fixes probing of Hifiberry DAC2 HD
ARM: dts: Add GPIO line names for downstream RPis
drm/vc4: hvs: Defer dlist slots deallocation
drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros
drm/vc4: hvs: Fix frame count register readout
ARM: boot: dts: bcm2711: Fix HVS register range
Revert "drm/vc4: plane: Use dlist offset instead of pointer"
Revert "drm/vc4: hvs: Create a shadow dlist"
Revert "drm/vc4: Correct interrupt enable bits on hvs4"
Revert "drm/vc4: Fix interrupt masking for HVS5."
dtoverlays: Switch ov7251 to using Media Controller by default
media: i2c: ov7251: Switch from V4L2_CID_GAIN to V4L2_CID_
media: i2c: ov7251: Add V4L2_CID_VBLANK
media: i2c: ov7251: Separate modes from frame intervals
media: i2c: ov7251: Limit exposure based on VTS
media: i2c: ov7251: Set VTS instead of having full tables for FPS.
media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS, CROP_DEFAULT
media: i2c: ov7251: Fix link_freq validation loop
media: i2c: ov7251: Do not reset gain on mode change
media: i2c: ov7251: Add V4L2_CID_HBLANK control
media: i2c: ov7251: Initialise current_mode during probe
media: i2c: ov7251: V4L2_CID_
media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed
media: i2c: ov7251: Reinstate setting ov7251_
media: i2c: Remove .s_power() from ov7251
media: i2c: Add pm_runtime support to ov7251
media: i2c: Add ov7251_
media: i2c: Add support for 19.2MHz clock to ov7251
media: i2c: Add ov7251_
media: i2c: Provide ov7251_
media: i2c: Add acpi support to ov7251
dtoverlays: Correct link frequency for ov7251
usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
drm/vc4: Convert vc4_dsi to use atomic enable/
drm/vc4: Remove splitting the bridge chain from the driver.
drm/vc4: Move DSI initialisation to encoder_mode_set.
drm/vc4: Rename bridge to out_bridge
drm/tc358762: Set the DRM_BRIDGE_
drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
drm: Introduce DRM_BRIDGE_
dtoverlays: Add additional mappings to vc4-kms-dpi-generic
drm/vc4: For DPI, MEDIA_BUS_
media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic
dtoverlays: fix overrides in vc4-kms-dpi-generic
overlays: rpi-poe(-plus): Fix parameters
drm/vc4: hdmi: Make sure the device is powered with CEC
CVE References
Changed in linux-raspi (Ubuntu): | |
status: | New → Confirmed |
tags: | added: kern-2651 |
description: | updated |
Changed in linux-raspi (Ubuntu Jammy): | |
status: | Confirmed → Fix Committed |
This bug was fixed in the package linux-raspi - 5.15.0-1004.4
---------------
linux-raspi (5.15.0-1004.4) jammy; urgency=medium
* jammy/linux-raspi: 5.15.0-1004.4 -proposed tracker (LP: #1965283)
* Packaging resync (LP: #1786013)
- [Packaging] update Ubuntu.md
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-16) OP_UPSTREAM_ FIRST flag to configure OP_UPSTREAM_ FIRST to alter bridge init upstream_ first to alter bridge init order upstream_ first flag to drm_panel upstream_ first flag to configure DSI host
(LP: #1965308)
- ARM: dts: bcm2711-rpi-ds: Disable the BCM2835 STC
- Revert "drm/tc358762: Set the DRM_BRIDGE_
DSI host"
- Revert "drm: Introduce DRM_BRIDGE_
order"
- drm/bridge: Introduce pre_enable_
- drm/panel: Add prepare_
- drm: Include drm_connector.h from drm_panel.h
- drm/tc358762: Set the pre_enable_
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08) FMT_RGB565_ 1X16 is mode 1, not 3. OP_UPSTREAM_ FIRST to alter bridge init order OP_UPSTREAM_ FIRST flag to configure DSI disable/ mode_set. check_hwcfg( ) pll_configure( ) detect_ chip() global_ init_setting LINK_FREQUENCY is fixed
(LP: #1964144)
- drm/vc4: hdmi: Make sure the device is powered with CEC
- overlays: rpi-poe(-plus): Fix parameters
- dtoverlays: fix overrides in vc4-kms-dpi-generic
- dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic
- media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
- drm/vc4: For DPI, MEDIA_BUS_
- dtoverlays: Add additional mappings to vc4-kms-dpi-generic
- drm: Introduce DRM_BRIDGE_
- drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
- drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
- drm/tc358762: Set the DRM_BRIDGE_
host
- drm/vc4: Rename bridge to out_bridge
- drm/vc4: Move DSI initialisation to encoder_mode_set.
- drm/vc4: Remove splitting the bridge chain from the driver.
- drm/vc4: Convert vc4_dsi to use atomic enable/
- drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
- drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
- usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
- dtoverlays: Correct link frequency for ov7251
- media: i2c: Add acpi support to ov7251
- media: i2c: Provide ov7251_
- media: i2c: Add ov7251_
- media: i2c: Add support for 19.2MHz clock to ov7251
- media: i2c: Add ov7251_
- media: i2c: Add pm_runtime support to ov7251
- media: i2c: Remove .s_power() from ov7251
- media: i2c: ov7251: Reinstate setting ov7251_
- media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed
- media: i2c: ov7251: V4L2_CID_
- media: i2c: ov7251: Initialise current_mode during probe
- media: i2c: ov7251: Add V4L2_CID_HBLANK control
- media: i2c: ov7251: Do not reset gain on mode change
- media: i2c: ov7251: Fix link_freq validation loop
- media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS,
CROP_DEFAULT
- media: i2c: ov7251: Set VTS instead of having full tables for FPS.
- media: i2c: ov7251: Limit exposure based o...