This bug was fixed in the package linux-raspi - 5.4.0-1028.31
--------------- linux-raspi (5.4.0-1028.31) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1028.31 -proposed tracker (LP: #1911311)
[ Ubuntu: 5.4.0-63.71 ]
* focal/linux: 5.4.0-63.71 -proposed tracker (LP: #1911333) * overlay: permission regression in 5.4.0-51.56 due to patches related to CVE-2020-16120 (LP: #1900141) - ovl: do not fail because of O_NOATIME * Focal update: v5.4.79 upstream stable release (LP: #1907151) - net/mlx5: Use async EQ setup cleanup helpers for multiple EQs - net/mlx5: poll cmd EQ in case of command timeout - net/mlx5: Fix a race when moving command interface to events mode - net/mlx5: Add retry mechanism to the command entry index allocation * Kernel 5.4.0-56 Wi-Fi does not connect (LP: #1906770) - mt76: fix fix ampdu locking * [Ubuntu 21.04 FEAT] mpt3sas: Request to include the patch set which supports topology where zoning is enabled in expander (LP: #1899802) - scsi: mpt3sas: Define hba_port structure - scsi: mpt3sas: Allocate memory for hba_port objects - scsi: mpt3sas: Rearrange _scsih_mark_responding_sas_device() - scsi: mpt3sas: Update hba_port's sas_address & phy_mask - scsi: mpt3sas: Get device objects using sas_address & portID - scsi: mpt3sas: Rename transport_del_phy_from_an_existing_port() - scsi: mpt3sas: Get sas_device objects using device's rphy - scsi: mpt3sas: Update hba_port objects after host reset - scsi: mpt3sas: Set valid PhysicalPort in SMPPassThrough - scsi: mpt3sas: Handling HBA vSES device - scsi: mpt3sas: Add bypass_dirty_port_flag parameter - scsi: mpt3sas: Handle vSES vphy object during HBA reset - scsi: mpt3sas: Add module parameter multipath_on_hba - scsi: mpt3sas: Bump driver version to 35.101.00.00
[ Ubuntu: 5.4.0-62.70 ]
* focal/linux: 5.4.0-62.70 -proposed tracker (LP: #1911144) * CVE-2020-28374 - SAUCE: target: fix XCOPY NAA identifier lookup * Packaging resync (LP: #1786013) - update dkms package versions
linux-raspi (5.4.0-1027.30) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1027.30 -proposed tracker (LP: #1910016)
* rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487) - net: lan78xx: Ack pending PHY ints when resetting
* focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10 (LP: #1908077) - ARM: dts: Limit BT modem baud rate on 3B - configs: Enable CHACHA20POLY1305=m - overlays: Update i2c0 overlay to disable the i2c0mux. - dt: Remove duplicate assignment for i2c0 pinctrl config - overlays: Add option for composite to vc4-kms-v3d-pi4. - minor typo in directions - overlays: Regenerate upstream-pi4 overlay - overlays: Add parameters to adafruit18, sainsmart18 - rpivid_h265: Fix width/height typo - overlays: Add extra CMA sizes (up to 512M) - overlays: Add note to BCM2711 overlays - overlays: adafruit18,sainsmart18: default bgr to off - configs: Remove I2C_BRCMSTB from the kernel - net: bcmgenet: Reset RBUF on first open - ASoC: cs42xx8: Only define cs42xx8_of_match once - configs: Regenerate the defconfigs - staging: bcm2835-codec: Use a define the completion timeout - staging: bcm2835-codec: Correct buffer number change on start streaming - USB: gadget: f_hid: avoid crashes and log spam - Update hy28b-overlay.dts - overlays: Update display GPIO declarations - SQUASH: USB: gadget: f_hid: remove more spam - configs: Add CONFIG_RTC_DRV_SD3078=m - overlays: Add sd3078 to the i2c-rtc overlay - configs: Restore SND_PCM_OSS=m - configs: Add MEMCG_SWAP support initially disabled - dwc_otg: initialise sched_frame for periodic QHs that were parked - arm64: configs: Enable Unicam support - arm64: configs: Enable V4L2 test module support - staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32 - staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32 - ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10 - gpio: Add gpio-fsm driver - configs: Add CONFIG_GPIO_FSM=m - overlays: Add fsm-demo overlay - overlays: Add ghost-amp overlay - Fixes a problem when module probes before i2c module is available - uapi: Update V4L2_CID_USER_BCM2835_ISP_BASE due to upstream change - Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is enabled" - dtoverlays: Correct CSI2 settings for ov9281 - xhci: quirks: add link TRB quirk for VL805 - dts: Add CM4 to arm64 dt files - dts: Tidy the Raspberry Pi Makefile entries - staging: bcm2835-audio: Add disable-headphones flag - ARM: dts: Disable headphone audio on Zeroes, CM4 - overlays: Enable headphone audio in audremap - rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover - PiFi-40 defconfigs - PiFi-40 Devicetree files - PiFi-40 driver, Makefile and Kconfig - dwc_otg: Minimise header and fix build warnings - gpio-fsm: Fix a build warning - rpivid_h625: Fix build warnings - dwc_otg: Fix more build warnings - bcm2708_fb: Fix a build warning - bcm2835-pcm: Fix up multichannel pcm audio - watchdog: bcm2835: Ignore params after the partition number - firmware: raspberrypi: Add support for tryonce reboot flag - phy: broadcom: split out the BCM54213PE from the BCM54210E IDs - phy: broadcom: Add bcm54213pe configuration - Allo boss2 driver - Add allo boss2 overlay - Add allo boss2 config - Revert "mailbox: avoid timer start from callback" - ARM: dts: Add bcm2711-rpi-400.dts - overlays: Deprecate and delete the sdtweak overlay - overlays: Complete the sdtweak excision - ARM: dts: bcm27xx: Remove enable_headphones setting - staging: vcsm-cma: Fix memory leak from not detaching dmabuf - Update Allo Piano Dac Driver for 5.4.y kernels - Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels. - Update volume controls in Allo Piano Dac Plus - can: rx-offload: can_rx_offload_add_manual(): add new initialization function - dt-binding: can: mcp25xxfd: document device tree bindings - can: mcp25xxfd: add regmap infrastructure - can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN - can: mcp25xxfd: add listen-only mode - can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update log messages - can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information - can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanup - can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable set_normal mode - dt-binding: can: mcp25xxfd: documentation fixes - dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings to "microchip,mcp251xfd" - can: mcp25xxfd: narrow down wildcards in device tree bindings to "microchip,mcp251xfd" - can: mcp251xfd: rename driver files and subdir to mcp251xfd - can: mcp251xfd: rename all user facing strings to mcp251xfd - can: mcp251xfd: rename all remaining occurrence to mcp251xfd - can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages - can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings - can: mcp251xfd: remove unneeded break - mcp251xfd: add overlay - Add mcp251xfd driver as module to RPI build configuration - media: i2c: imx219: Selection compliance fixes - media: bcm2835-unicam: Correctly handle error propagation for stream on - media: bcm2835-unicam: Return early from stop_streaming() if stopped - media: bcm2835-unicam: Clear clock state when stopping streaming - ARM: dts: CM4 audio pins are not connected - configs: Add RTC_DRV_PCF85063=m - overlays: Add PCF85063 and PCF85063A to i2c-rtc - overlays: Fix cut-and-paste error in README - media: i2c: imx477: Selection compliance fixes - SAUCE: net: bcmgenet: Remove empty line to match upstream - [Config] raspi: updateconfigs after update to rpi-5.4.y 2020-12-10
[ Ubuntu: 5.4.0-60.67 ]
* Packaging resync (LP: #1786013) - [Packaging] update variants - update dkms package versions * CVE-2021-1052 // CVE-2021-1053 - [Packaging] NVIDIA -- Add the NVIDIA 460 driver
-- Kleber Sacilotto de Souza <email address hidden> Wed, 20 Jan 2021 11:27:41 +0100
This bug was fixed in the package linux-raspi - 5.4.0-1028.31
---------------
linux-raspi (5.4.0-1028.31) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1028.31 -proposed tracker (LP: #1911311)
[ Ubuntu: 5.4.0-63.71 ]
* focal/linux: 5.4.0-63.71 -proposed tracker (LP: #1911333) mark_responding _sas_device( ) del_phy_ from_an_ existing_ port() dirty_port_ flag parameter
* overlay: permission regression in 5.4.0-51.56 due to patches related to
CVE-2020-16120 (LP: #1900141)
- ovl: do not fail because of O_NOATIME
* Focal update: v5.4.79 upstream stable release (LP: #1907151)
- net/mlx5: Use async EQ setup cleanup helpers for multiple EQs
- net/mlx5: poll cmd EQ in case of command timeout
- net/mlx5: Fix a race when moving command interface to events mode
- net/mlx5: Add retry mechanism to the command entry index allocation
* Kernel 5.4.0-56 Wi-Fi does not connect (LP: #1906770)
- mt76: fix fix ampdu locking
* [Ubuntu 21.04 FEAT] mpt3sas: Request to include the patch set which supports
topology where zoning is enabled in expander (LP: #1899802)
- scsi: mpt3sas: Define hba_port structure
- scsi: mpt3sas: Allocate memory for hba_port objects
- scsi: mpt3sas: Rearrange _scsih_
- scsi: mpt3sas: Update hba_port's sas_address & phy_mask
- scsi: mpt3sas: Get device objects using sas_address & portID
- scsi: mpt3sas: Rename transport_
- scsi: mpt3sas: Get sas_device objects using device's rphy
- scsi: mpt3sas: Update hba_port objects after host reset
- scsi: mpt3sas: Set valid PhysicalPort in SMPPassThrough
- scsi: mpt3sas: Handling HBA vSES device
- scsi: mpt3sas: Add bypass_
- scsi: mpt3sas: Handle vSES vphy object during HBA reset
- scsi: mpt3sas: Add module parameter multipath_on_hba
- scsi: mpt3sas: Bump driver version to 35.101.00.00
[ Ubuntu: 5.4.0-62.70 ]
* focal/linux: 5.4.0-62.70 -proposed tracker (LP: #1911144)
* CVE-2020-28374
- SAUCE: target: fix XCOPY NAA identifier lookup
* Packaging resync (LP: #1786013)
- update dkms package versions
linux-raspi (5.4.0-1027.30) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1027.30 -proposed tracker (LP: #1910016)
* rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487)
- net: lan78xx: Ack pending PHY ints when resetting
* focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10 (LP: #1908077) sainsmart18: default bgr to off RTC_DRV_ SD3078= m USER_BCM2835_ ISP_BASE due to upstream change offload_ add_manual( ): add new initialization handle_ eccif() : add ECC related errata and update ring_free( ): fix memory leak during cleanup microchip, mcp251xfd" microchip, mcp251xfd" regmap_ crc_read( ): increase severity of CRC read regmap_ nocrc_read( ): fix semicolon.cocci warnings
- ARM: dts: Limit BT modem baud rate on 3B
- configs: Enable CHACHA20POLY1305=m
- overlays: Update i2c0 overlay to disable the i2c0mux.
- dt: Remove duplicate assignment for i2c0 pinctrl config
- overlays: Add option for composite to vc4-kms-v3d-pi4.
- minor typo in directions
- overlays: Regenerate upstream-pi4 overlay
- overlays: Add parameters to adafruit18, sainsmart18
- rpivid_h265: Fix width/height typo
- overlays: Add extra CMA sizes (up to 512M)
- overlays: Add note to BCM2711 overlays
- overlays: adafruit18,
- configs: Remove I2C_BRCMSTB from the kernel
- net: bcmgenet: Reset RBUF on first open
- ASoC: cs42xx8: Only define cs42xx8_of_match once
- configs: Regenerate the defconfigs
- staging: bcm2835-codec: Use a define the completion timeout
- staging: bcm2835-codec: Correct buffer number change on start streaming
- USB: gadget: f_hid: avoid crashes and log spam
- Update hy28b-overlay.dts
- overlays: Update display GPIO declarations
- SQUASH: USB: gadget: f_hid: remove more spam
- configs: Add CONFIG_
- overlays: Add sd3078 to the i2c-rtc overlay
- configs: Restore SND_PCM_OSS=m
- configs: Add MEMCG_SWAP support initially disabled
- dwc_otg: initialise sched_frame for periodic QHs that were parked
- arm64: configs: Enable Unicam support
- arm64: configs: Enable V4L2 test module support
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32
- ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10
- gpio: Add gpio-fsm driver
- configs: Add CONFIG_GPIO_FSM=m
- overlays: Add fsm-demo overlay
- overlays: Add ghost-amp overlay
- Fixes a problem when module probes before i2c module is available
- uapi: Update V4L2_CID_
- Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is
enabled"
- dtoverlays: Correct CSI2 settings for ov9281
- xhci: quirks: add link TRB quirk for VL805
- dts: Add CM4 to arm64 dt files
- dts: Tidy the Raspberry Pi Makefile entries
- staging: bcm2835-audio: Add disable-headphones flag
- ARM: dts: Disable headphone audio on Zeroes, CM4
- overlays: Enable headphone audio in audremap
- rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
- PiFi-40 defconfigs
- PiFi-40 Devicetree files
- PiFi-40 driver, Makefile and Kconfig
- dwc_otg: Minimise header and fix build warnings
- gpio-fsm: Fix a build warning
- rpivid_h625: Fix build warnings
- dwc_otg: Fix more build warnings
- bcm2708_fb: Fix a build warning
- bcm2835-pcm: Fix up multichannel pcm audio
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- Allo boss2 driver
- Add allo boss2 overlay
- Add allo boss2 config
- Revert "mailbox: avoid timer start from callback"
- ARM: dts: Add bcm2711-rpi-400.dts
- overlays: Deprecate and delete the sdtweak overlay
- overlays: Complete the sdtweak excision
- ARM: dts: bcm27xx: Remove enable_headphones setting
- staging: vcsm-cma: Fix memory leak from not detaching dmabuf
- Update Allo Piano Dac Driver for 5.4.y kernels
- Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels.
- Update volume controls in Allo Piano Dac Plus
- can: rx-offload: can_rx_
function
- dt-binding: can: mcp25xxfd: document device tree bindings
- can: mcp25xxfd: add regmap infrastructure
- can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
- can: mcp25xxfd: add listen-only mode
- can: mcp25xxfd: mcp25xxfd_
log messages
- can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata
information
- can: mcp25xxfd: mcp25xxfd_
- can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable
set_normal mode
- dt-binding: can: mcp25xxfd: documentation fixes
- dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings to
"
- can: mcp25xxfd: narrow down wildcards in device tree bindings to
"
- can: mcp251xfd: rename driver files and subdir to mcp251xfd
- can: mcp251xfd: rename all user facing strings to mcp251xfd
- can: mcp251xfd: rename all remaining occurrence to mcp251xfd
- can: mcp251xfd: mcp251xfd_
error messages
- can: mcp251xfd: mcp251xfd_
- can: mcp251xfd: remove unneeded break
- mcp251xfd: add overlay
- Add mcp251xfd driver as module to RPI build configuration
- media: i2c: imx219: Selection compliance fixes
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- ARM: dts: CM4 audio pins are not connected
- configs: Add RTC_DRV_PCF85063=m
- overlays: Add PCF85063 and PCF85063A to i2c-rtc
- overlays: Fix cut-and-paste error in README
- media: i2c: imx477: Selection compliance fixes
- SAUCE: net: bcmgenet: Remove empty line to match upstream
- [Config] raspi: updateconfigs after update to rpi-5.4.y 2020-12-10
[ Ubuntu: 5.4.0-60.67 ]
* Packaging resync (LP: #1786013)
- [Packaging] update variants
- update dkms package versions
* CVE-2021-1052 // CVE-2021-1053
- [Packaging] NVIDIA -- Add the NVIDIA 460 driver
-- Kleber Sacilotto de Souza <email address hidden> Wed, 20 Jan 2021 11:27:41 +0100