Comment 2 for bug 1625157

This is all what is in dmesg (after bootup)
[ 33.232428] qla2xxx [0000:13:00.0]-d001:3: Firmware dump saved to temp buffer (3/ffffc900009c2000), dump status flags (0x3f).
[ 33.232472] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[ 33.232478] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - ha=ffff880035530000.
[ 33.969181] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[ 34.065174] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.
[ 64.356819] qla2xxx [0000:13:00.0]-d009:3: Firmware has been previously dumped (ffffc900009c2000) -- ignoring request.
[ 64.356886] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[ 64.356890] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - ha=ffff880035530000.
[ 65.081511] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[ 65.193576] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.
[ 95.362076] qla2xxx [0000:13:00.0]-d009:3: Firmware has been previously dumped (ffffc900009c2000) -- ignoring request.
[ 95.362181] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[ 95.362186] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - ha=ffff880035530000.
[ 96.102053] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[ 96.198014] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.

There are some extra lines containing qla2xxx during bootup:
[ 1.883366] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 1.884125] qla2xxx [0000:13:00.0]-001d: : Found an ISP2532 irq 16 iobase 0xffffc900003b4000.
(...)
[ 2.221204] scsi host3: qla2xxx
[ 2.221775] qla2xxx [0000:13:00.0]-00fb:3: QLogic QLE2562 - QLogic 8Gb FC Dual-port HBA for System x.
[ 2.221870] qla2xxx [0000:13:00.0]-00fc:3: ISP2532: PCIe (5.0GT/s x32) @ 0000:13:00.0 hdma- host#=3 fw=8.03.00 (90d5).