k3b1.68.0 fails to close the DVD dual-layer disk

[salvoinzk]

Binary package hint: k3b

I'm running on Kubuntu 9.10 karmic koala 64bit

k3b 1.68.0 fails to close the disk, at the end of the burning process of a dual-layer DVD.
the problem seems this : "/usr/bin/wodim: Cannot fixate disk."

(while it works good with the other supports cd-r and dvd-r or dvd+r)

here is the output of script:

Devices
-----------------------
MATSHITA DVD-RAM UJ892AS 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version: 4.5.2
Kernel: 2.6.31-17-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'DVD-RAM UJ892AS '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 458752 = 448 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2770 KB/s
Track 01: data 6033 MB
Total size: 6928 MB (686:26.30) = 3088973 sectors
Lout start: 6929 MB (686:28/23) = 3088973 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4171712 Blocks current: 4171712 Blocks remaining: 1082739
Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 6033 MB written.
Track 01: 1 of 6033 MB written (fifo 100%) [buf 99%] 0.1x.
Track 01: 2 of 6033 MB written (fifo 100%) [buf 99%] 1.0x.
Track 01: 3 of 6033 MB written (fifo 100%) [buf 99%] 2.1x.
Track 01: 4 of 6033 MB written (fifo 100%) [buf 98%] 2.0x.
Track 01: 5 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 6 of 6033 MB written (fifo 100%) [buf 98%] 2.0x.
Track 01: 7 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 8 of 6033 MB written (fifo 100%) [buf 97%] 2.0x.
Track 01: 9 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 10 of 6033 MB written (fifo 100%) [buf 97%] 2.0x.
Track 01: 11 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 12 of 6033 MB written (fifo 100%) [buf 96%] 2.0x.
Track 01: 13 of 6033 MB written (fifo 100%) [buf 96%] 2.1x.
Track 01: 14 of 6033 MB written (fifo 100%) [buf 96%] 2.0x.
Track 01: 15 of 6033 MB written (fifo 100%) [buf 96%] 2.1x.
Track 01: 16 of 6033 MB written (fifo 100%) [buf 95%] 2.0x.
Track 01: 17 of 6033 MB written (fifo 100%) [buf 95%] 2.1x.
Track 01: 18 of 6033 MB written (fifo 100%) [buf 95%] 2.0x.
Track 01: 19 of 6033 MB written (fifo 100%) [buf 95%] 2.1x.
Track 01: 20 of 6033 MB written (fifo 100%) [buf 95%] 2.0x.
Track 01: 21 of 6033 MB written (fifo 100%) [buf 95%] 2.1x.
Track 01: 22 of 6033 MB written (fifo 100%) [buf 94%] 2.0x.
Track 01: 23 of 6033 MB written (fifo 100%) [buf 94%] 2.1x.
Track 01: 24 of 6033 MB written (fifo 100%) [buf 94%] 2.0x.
Track 01: 25 of 6033 MB written (fifo 100%) [buf 94%] 2.1x.
Track 01: 26 of 6033 MB written (fifo 100%) [buf 93%] 2.0x.
Track 01: 27 of 6033 MB written (fifo 100%) [buf 93%] 2.1x.
Track 01: 28 of 6033 MB written (fifo 100%) [buf 93%] 2.0x.
Track 01: 29 of 6033 MB written (fifo 100%) [buf 93%] 2.1x.
Track 01: 30 of 6033 MB written (fifo 99%) [buf 100%] 2.1x.
Track 01: 31 of 6033 MB written (fifo 99%) [buf 100%] 2.1x.
Track 01: 32 of 6033 MB written (fifo 100%) [buf 99%] 2.0x.
Track 01: 33 of 6033 MB written (fifo 100%) [buf 99%] 2.0x.
Track 01: 34 of 6033 MB written (fifo 100%) [buf 99%] 2.1x.
Track 01: 35 of 6033 MB written (fifo 100%) [buf 98%] 2.0x.
Track 01: 36 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 37 of 6033 MB written (fifo 100%) [buf 98%] 2.0x.
Track 01: 38 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 39 of 6033 MB written (fifo 100%) [buf 97%] 2.0x.
Track 01: 40 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 41 of 6033 MB written (fifo 100%) [buf 97%] 2.0x.
Track 01: 42 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 43 of 6033 MB written (fifo 100%) [buf 96%] 2.0x.

I'm going to the end of output bacause it's too long!

Track 01: 6019 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 6020 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 6021 of 6033 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: 6022 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 6023 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 6024 of 6033 MB written (fifo 100%) [buf 97%] 2.0x.
Track 01: 6025 of 6033 MB written (fifo 100%) [buf 97%] 2.1x.
Track 01: 6026 of 6033 MB written (fifo 100%) [buf 96%] 2.0x.
Track 01: 6027 of 6033 MB written (fifo 100%) [buf 96%] 2.1x.
Track 01: 6028 of 6033 MB written (fifo 100%) [buf 96%] 2.0x.
Track 01: 6029 of 6033 MB written (fifo 100%) [buf 96%] 2.1x.
Track 01: 6030 of 6033 MB written (fifo 100%) [buf 95%] 2.0x.
Track 01: 6031 of 6033 MB written (fifo 100%) [buf 95%] 2.1x.
Track 01: 6032 of 6033 MB written (fifo 100%) [buf 95%] 2.0x.
Track 01: 6033 of 6033 MB written (fifo 100%) [buf 95%] 2.1x.
Track 01: Total bytes read/written: 6326216704/6326216704 (3088973 sectors).
Writing time: 2357.920s
Average write speed 1.9x.
Min drive buffer fill was 47%
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 200.754s timeout 200s
/usr/bin/wodim: Cannot fixate disk.
Trouble flushing the cache
Fixating time: 200.754s
/usr/bin/wodim: fifo had 99645 puts and 99645 gets.
/usr/bin/wodim: fifo was 0 times empty and 90722 times full, min fill was 96%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=3088973s -

please help !!!

ProblemType: Bug
Architecture: amd64
Date: Sat Jan 23 11:49:16 2010
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/k3b
InstallationMedia: Kubuntu 9.10 "Karmic Koala" - Release amd64 (20091027)
NonfreeKernelModules: nvidia
Package: k3b 1.68.0~alpha3-0ubuntu1
ProcEnviron:
 LANGUAGE=it_IT:it:en_GB:en
 LANG=it_IT.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-17.54-generic
SourcePackage: k3b
Uname: Linux 2.6.31-17-generic x86_64

[salvoinzk (salvoinz)]

Still failed!

I have changed the writing speed by putting it to 4x (in my first check was 2,4x).

but I get the same error.

here is the output script:

Devices
-----------------------
MATSHITA DVD-RAM UJ892AS 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version: 4.5.2
Kernel: 2.6.31-17-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'DVD-RAM UJ892AS '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 458752 = 448 KB
FIFO size : 12582912 = 12288 KB
Speed set to 5540 KB/s
Track 01: data 6033 MB
Total size: 6928 MB (686:26.30) = 3088973 sectors
Lout start: 6929 MB (686:28/23) = 3088973 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4171712 Blocks current: 4171712 Blocks remaining: 1082739
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 6033 MB written.
Track 01: 1 of 6033 MB written (fifo 100%) [buf 99%] 0.1x.
Track 01: 2 of 6033 MB written (fifo 100%) [buf 99%] 1.0x.
Track 01: 3 of 6033 MB written (fifo 100%) [buf 99%] 2.1x.
Track 01: 4 of 6033 MB written (fifo 100%) [buf 98%] 2.0x.
Track 01: 5 of 6033 MB written (f...

[Rohan Garg (rohangarg)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. We are sorry that we do not always have the capacity to look at all reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and your problem may have been fixed with some of the updates. It would help us a lot if you could test the current Ubuntu development version (10.10). If you can test it, and it is still an issue, we would appreciate if you could upload updated logs by running apport-collect <bug #>, and any other logs that are relevant for this particular issue.

[Joe User (axyz-yahoo)]

Please see bug https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/481536

I believe this is probably the same problem.

This problem still exists with a brand new installation of kubuntu 10.10.

I cannot burn dual-layer DVD's if the data to be burned requires the second DVD layer.

I can build the cdrtools-3.00 as suggested by Schilly in bug 481536, and burn the DVD's just fine with the same data and hardware.

This prolem has existed for a long time. Let's fix this by replacing wodim with the latest and greatest cdrecord.

[Launchpad Janitor (janitor)]

[Expired for k3b (Ubuntu) because there has been no activity for 60 days.]