Comment 1 for bug 482419

Revision history for this message
Richard Huddleston (rhuddusa) wrote :

I'm also seeing this with e1000e driver on an intel s5000psl motherboard

iface bond0 inet dhcp
        slaves eth0 eth1
        bond-mode 4
        bond-miimon 10
        bond-lacp-rate fast
        bond-xmit_hash_policy layer2+3

after boot up
/proc/net/bonding/bond0 has
MII Status: down

i can bring the bond up if i do
sudo ifdown bond0; sudo ifup bond0

i tried playing with the bonding updelay, just for kicks, but no change

04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
        Subsystem: Intel Corporation Device 3476
        Flags: bus master, fast devsel, latency 0, IRQ 57
        Memory at b8820000 (32-bit, non-prefetchable) [size=128K]
        Memory at b8400000 (32-bit, non-prefetchable) [size=4M]
        I/O ports at 3020 [size=32]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Kernel driver in use: e1000e
        Kernel modules: e1000e

04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
        Subsystem: Intel Corporation Device 3476
        Flags: bus master, fast devsel, latency 0, IRQ 58
        Memory at b8800000 (32-bit, non-prefetchable) [size=128K]
        Memory at b8000000 (32-bit, non-prefetchable) [size=4M]
        I/O ports at 3000 [size=32]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Kernel driver in use: e1000e
        Kernel modules: e1000e