Comment 3 for bug 600219

Just to add I am also experiencing this since upgrading from hardy to lucid server. faxgetty will segfault just after Begin Page

Sep 01 12:32:20.60: [23473]: SESSION BEGIN 000022359 441709369264
Sep 01 12:32:20.60: [23473]: HylaFAX (tm) Version 6.0.3
Sep 01 12:32:20.60: [23473]: <-- [4:ATA\r]
Sep 01 12:32:25.81: [23473]: --> [7:CONNECT]
Sep 01 12:32:25.81: [23473]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 01 12:32:25.81: [23473]: RECV FAX: begin
Sep 01 12:32:25.83: [23473]: <-- data [32]
Sep 01 12:32:25.83: [23473]: <-- data [2]
Sep 01 12:32:26.80: [23473]: --> [7:CONNECT]
Sep 01 12:32:26.80: [23473]: <-- data [23]
Sep 01 12:32:26.80: [23473]: <-- data [2]
Sep 01 12:32:26.83: [23473]: --> [7:CONNECT]
Sep 01 12:32:26.83: [23473]: <-- data [13]
Sep 01 12:32:26.83: [23473]: <-- data [2]
Sep 01 12:32:28.96: [23473]: --> [2:OK]
Sep 01 12:32:28.96: [23473]: <-- [9:AT+FRH=3\r]
Sep 01 12:32:29.50: [23473]: --> [7:CONNECT]
Sep 01 12:32:30.62: [23473]: --> [2:OK]
Sep 01 12:32:30.62: [23473]: RECV recv DCS (command signal)
Sep 01 12:32:30.62: [23473]: REMOTE wants 14400 bit/s
Sep 01 12:32:30.62: [23473]: REMOTE wants A4 page width (215 mm)
Sep 01 12:32:30.62: [23473]: REMOTE wants unlimited page length
Sep 01 12:32:30.62: [23473]: REMOTE wants 7.7 line/mm
Sep 01 12:32:30.62: [23473]: REMOTE wants 1-D MH
Sep 01 12:32:30.62: [23473]: RECV training at v.17 14400 bit/s
Sep 01 12:32:30.62: [23473]: <-- [11:AT+FRM=145\r]
Sep 01 12:32:32.13: [23473]: --> [7:CONNECT]
Sep 01 12:32:33.95: [23473]: RECV: TCF 2934 bytes, 6% non-zero, 2732 zero-run
Sep 01 12:32:34.16: [23473]: --> [10:NO CARRIER]
Sep 01 12:32:34.16: [23473]: <-- [9:AT+FRS=7\r]
Sep 01 12:32:34.17: [23473]: --> [2:OK]
Sep 01 12:32:34.17: [23473]: TRAINING succeeded
Sep 01 12:32:34.17: [23473]: <-- [9:AT+FTH=3\r]
Sep 01 12:32:34.22: [23473]: --> [7:CONNECT]
Sep 01 12:32:34.22: [23473]: <-- data [3]
Sep 01 12:32:34.22: [23473]: <-- data [2]
Sep 01 12:32:35.46: [23473]: --> [2:OK]
Sep 01 12:32:35.46: [23473]: <-- [11:AT+FRM=146\r]
Sep 01 12:32:37.86: [23473]: --> [7:CONNECT]
Sep 01 12:32:37.86: [23473]: RECV: begin page

And from dmesg:
[316471.104213] faxgetty[23473]: segfault at a3c ip 0805c083 sp bf88e390 error 4 in faxgetty[8048000+72000]

I have changed sessiontracing to 0x08FFF in config.tty0. There's also config and config.sav, do I need to change it there too? I can give you a couple of days output then I will have to revert back to hardy from a dd image since I risk losing the company faxed purchase orders.