flash-kernel 3.100ubuntu1 source package in Ubuntu
Changelog
flash-kernel (3.100ubuntu1) groovy; urgency=medium * Merge with Debian unstable. Remaining changes: - Add support for QCT APQ8064 CDP - Add support for QCT APQ8064 CDP; thanks Alfonso Sanchez-Beato. - Add support for Calxeda Highbank - Add support for Calxeda Highbank (with bootscr.highbank different from Debian's version) - bootscr.highbank: allow more space to load larger kernels - Add support for Nexus 4 (Mako) - Enabling support for mako (Nexus 4) - Add support for Marvell ArmadaXP - Re-add support for Marvell ArmadaXP - Fix armadaxp kernel load address - Add support for Samsung Exynos 5440 platforms - Add support for EXYNOS5440-based platforms - Add generic-lpae to the XB-Subarchitecture list in debian/control - debian/flash-kernel-installer.isinstallable: add arm*/generic-lpae - Add support for HP ProLiant m400 and m800 cartridges - Added support for HP ProLiant m800 Server Cartridge - Add support for HP ProLiant m800 cartridges - Set required boot arguments for HP ProLiant m800 cartridges - Add support for HP ProLiant m400 Server Cartridges - HP Moonshot Cartridges: Use $baudrate from u-boot environment as serial console speed - HP Moonshot Cartridges: Enable hardware flow control as required by the HP moonshot chassis - Enable U-Boot environment support for X-Gene platforms - Use filesystem agnostic "load" command instead of assuming ext4 - Add a bootscript specific to X-Gene Mustang boards since they need to pull their dtb from the OS. - Add support for OMAP3 and OMAP4 boards - add DB entry for "OMAP3 Beagle Board" (funnily thats missing) - add Panda to the list of supported board in the README file - debian/control: Re-add omap and omap4 to the flash-kernel-installer XB-Subarchitecture field. These appear to have been lost somewhere along the way. - Also add omap and omap4 to flash-kernel-installer.isinstallable. - switch omap3 and omap4 to uEnv.txt/preEnv.txt (the former holds all active boot commands, the latter holds the kernel commandline only) - switch omap3 and omap4 from Bootloader-sets-root: no to yes, we now generate a root=UUID= line on the fly for arches using uEnv.txt/preEnv.txt - introduce bootscript/uEnvtxt.omap - do not move the original uEnvtxt.omap to the target, use a copy instead - add "quiet splash" as default options to omap bootscr - enable UUID detection of the currently used root device - if uEnv.txt is defined in the db for an arch, generate preEnv.txt from UBOOT_DEFAULTS and UUID detection data - make sure blkid only gives us the UUID and not any other metadata like labels or filesystem - hide the boot device from udisk's automounting after installation on all systems using uEnv.txt to configure u-boot - make sure we only rename the bootrom partition so udisks hides it, when using mkdosfs for setting the label like we did in jasper (where we cached the contents before doing this) MLO and u-boot.bin are gone - Add support for grouper boards - add support for the grouper architecture - Add support for Wandboard Quad - Wandboard: Use /dev/disk/by-path/platform-2198000.usdhc-part1 instead of the hardcoded mmcblk1p1, this should make things work on boards with just a single microSD card in. - Add basic support for WandBoard Quad. - Add support for Raspberry Pi 2, 3, 3+, CM3, CM3+, and 4 using a unified bootscript (replaces upstream's entries) - Update pi bootscript to support all flash-kernel vars, including calculated devtype and partition for future USB boot support - Install all potential uboot scripts [previously undocumented] - db/all.db: Add dummy entries as noops when running on VMs - make sure that if we dont want to override the bootloader root= option by setting "Bootloader-sets-root: yes", we actually dont do it - Update tests with new fields: Bootloader-sets-root - use umount -l in the cleanup function, else we fail while finishing up with the script - add a diversion for update-initramfs to live-installers post-base-installer.d to avoid update-initramfs runs before flash-kernel is configured - add a check for the diverted update-initramfs to flash-kernel-installer, so it gets reverted before we try to call update-initramfs - make post-base-installer.d/01flash-kernel-diversion actually an executable shell script - make sure that /dev is bind mounted in /target when running update-initramfs from flash-kernel-installer, else we do not find the boot media (this is only a workaround, actual fixing of the netinst environment is needed to fix this properly) - drop the "|| true" from the initramfs building code, if we fail here we actually dont want to attempt to flash that - Do not run flash-kernel inside an LXC container - Migrate default /etc/default/flash-kernel content to new default without asking via debconf - Filter the selection of 'latest' usable kernel through the whitelist. - Do not fail if there are no specified Kernel-Flavors for this machine. - flash-kernel/functions: Stop attempting to install the latest kernel if we request an older version, just refuse to act without --force. - Look for dtbs in /lib/firmware/$kvers/device-tree/ in find_dtb_file() - Allow us to find DTBs in both the old flat layout and the new vendor subdirectory layout, so we keep backward compatibility - Add support for gzip-compressed kernel images - Add support for AAarch64 Qualcomm laptops. - Fix AARCH64 qcom laptop names, to those accepted upstream and in the Ubuntu kernel. LP: #1847594 - Fix mkimage_kernel tests - Add "pi" value for the "Method" field which copies all dtbs and overlays to the boot partition and provides defaults for the boot paths of the kernel, initrd, and u-boot script. This fixes upgrades to support the Pi 4 on Bionic (LP: #1850678) - Add tests for android-related functions [previously undocumented] - Add Kernel-Flavors check to Raspberry Pi entries [previously undocumented] - Support "raspi" kernel flavor in addition to "raspi2" (LP: #1868071) - Add entry for Raspberry Pi 3A+ (LP: #1841955) - Always run flash-kernel on install/upgrade - Permit initrd to be missing in flash-kernel and the pi u-boot script (LP: #1867791) * Dropped obsolete changes: - Include support for arm*/ixp4xx and arm*/iop32x (was dropped upstream but erroneously re-included in prior merge) - re-add support for the FLASH_KERNEL_SKIP env variable, so the image build infrastructure has a chance to skip the automated flash-kernel run during image builds. - Also check for FLASH_KERNEL_SKIP to avoid setting up the root parameter in case flash-kernel will not be used - make the package postinst respect FLASH_KERNEL_SKIP - Remove FLASH_KERNEL_SKIP; it's no longer used in livecd-rootfs - Add support for installing dtb files in boot partition - Remove redundant copying of boot dtb - Apply patch from Paolo Pisati for appended DTB support - Update tests with new fields: DTB-Kernel-Version - Fix typo in dtb_kver test that made it break all non-dtb platforms. - Remove redundant DTB-Kernel-Version field (in favour of upstream DTB-Append-From field) - Merge all RPi bootscripts into one unified bootscript which handles all Pi architectures - Remove uboot.env case which was only used for RPi2 (now supported by the unified RPi bootscript) flash-kernel (3.100) unstable; urgency=medium * Team upload [ Uwe Kleine-König ] * Add support for bootspec entries (bootable by barebox). (Closes: #931953) * Fix a corner case that makes flash-kernel fail silently. (Closes: #932231) * Make initrd optional for machines with Boot-Multi-Path. (Adresses: #869073) [ Guido Günther ] * Add support for Librem 5 devkit (Closes: #927700) [ Lubomir Rintel] * Add support for OLPC XO-1.75 laptops. [ Holger Wansing ] * Add comment for translators, to keep main menu entry below a 55 columns limit. This updates all po|pot files. [ Updated translations ] * Croatian (hr.po) by gogogogi * Marathi (mr.po) by Prachi Joshi flash-kernel (3.99) unstable; urgency=medium [ Domenico Andreoli ] * Add support for NanoPi NEO2 (Closes: #928861). [ Cyril Brulebois ] * Remove Christian Perrier from Uploaders, with many thanks for all his contributions over the years! (Closes: #927488) [ Heinrich Schuchardt ] * Add Marvell 8040 MACCHIATOBin Double-shot and Single-shot. (Closes: #928951) -- Dave Jones <email address hidden> Mon, 04 May 2020 20:14:16 +0000
Upload details
- Uploaded by:
- Dave Jones
- Sponsored by:
- Łukasz Zemczak
- Uploaded to:
- Groovy
- Original maintainer:
- Ubuntu Developers
- Architectures:
- arm64 armel armhf
- Section:
- utils
- Urgency:
- Medium Urgency
See full publishing history Publishing
Series | Published | Component | Section |
---|
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
flash-kernel_3.100ubuntu1.tar.xz | 82.7 KiB | 09155731ce7a751a8480a43d1a2bcd6b90dbf5954bfea678bb76a5b1e4ed0356 |
flash-kernel_3.100ubuntu1.dsc | 1.5 KiB | 6eba8588d960025c39529affa8ee9b3f7a06fb8a3960857c441854df7312d0b8 |
Available diffs
- diff from 3.98ubuntu12 to 3.100ubuntu1 (19.8 KiB)
Binary packages built by this source
- flash-kernel: No summary available for flash-kernel in ubuntu groovy.
No description available for flash-kernel in ubuntu groovy.
- flash-kernel-installer: No summary available for flash-kernel-installer in ubuntu groovy.
No description available for flash-kernel-
installer in ubuntu groovy.