Comment 18 for bug 299699

##############################################################################
#
# Sample ChilliSpot configuration file
#
##############################################################################

# TAG: fg
# Include this flag if process is to run in the foreground
#fg

# TAG: debug
# Include this flag to include debug information.
#debug

# TAG: interval
# Re-read configuration file at this interval. Will also cause new domain
# name lookups to be performed. Value is given in seconds.
#interval 3600

# TAG: pidfile
# File to store information about the process id of the program.
# The program must have write access to this file/directory.
#pidfile /var/run/chilli.pid

# TAG: statedir
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
# This tag is currently ignored
#statedir ./

# TUN parameters

# TAG: net
# IP network address of external packet data network
# Used to allocate dynamic IP addresses and set up routing.
# Normally you do not need to uncomment this tag.
#net 192.168.182.0/24

# TAG: dynip
# Dynamic IP address pool
# Used to allocate dynamic IP addresses to clients.
# If not set it defaults to the net tag.
# Do not uncomment this tag unless you are an experienced user!
#dynip 192.168.182.0/24

# TAG: statip
# Static IP address pool
# Used to allocate static IP addresses to clients.
# Do not uncomment this tag unless you are an experienced user!
#statip 192.168.182.0/24

# TAG: dns1
# Primary DNS server.
# Will be suggested to the client.
# If omitted the system default will be used.
# Normally you do not need to uncomment this tag.
#dns1 172.16.0.5

# TAG: dns2
# Secondary DNS server.
# Will be suggested to the client.
# If omitted the system default will be used.
# Normally you do not need to uncomment this tag.
#dns2 172.16.0.6

# TAG: domain
# Domain name
# Will be suggested to the client.
# Normally you do not need to uncomment this tag.
#domain key.chillispot.org

# TAG: ipup
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
# <mask>
# Normally you do not need to uncomment this tag.
#ipup /etc/chilli.ipup

# TAG: ipdown
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
# <mask>
# Normally you do not need to uncomment this tag.
#ipdown /etc/chilli.ipdown

# Radius parameters

# TAG: radiuslisten
# IP address to listen to
# Normally you do not need to uncomment this tag.
#radiuslisten 127.0.0.1

# TAG: radiusserver1
# IP address of radius server 1
# For most installations you need to modify this tag.
radiusserver1

# TAG: radiusserver2
# IP address of radius server 2
# If you have only one radius server you should set radiusserver2 to the
# same value as radiusserver1.
# For most installations you need to modify this tag.
radiusserver2

# TAG: radiusauthport
# Radius authentication port
# The UDP port number to use for radius authentication requests.
# The same port number is used for both radiusserver1 and radiusserver2.
# Normally you do not need to uncomment this tag.
#radiusauthport 1812

# TAG: radiusacctport
# Radius accounting port
# The UDP port number to use for radius accounting requests.
# The same port number is used for both radiusserver1 and radiusserver2.
# Normally you do not need to uncomment this tag.
#radiusacctport 1813

# TAG: radiussecret
# Radius shared secret for both servers
# For all installations you should modify this tag.
radiussecret

# TAG: radiusnasid
# Radius NAS-Identifier
# Normally you do not need to uncomment this tag.
#radiusnasid nas01

# TAG: radiuslocationid
# WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
# cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
# Normally you do not need to uncomment this tag.
#radiuslocationid isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport

# TAG: radiuslocationname
# WISPr Location Name. Should be in the format:
# <HOTSPOT_OPERATOR_NAME>,<LOCATION>
# Normally you do not need to uncomment this tag.
#radiuslocationname ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport

# Radius proxy parameters

# TAG: proxylisten
# IP address to listen to
# Normally you do not need to uncomment this tag.
#proxylisten 10.0.0.1

# TAG: proxyport
# UDP port to listen to.
# If not specified a port will be selected by the system
# Normally you do not need to uncomment this tag.
#proxyport 1645

# TAG: proxyclient
# Client(s) from which we accept radius requests
# Normally you do not need to uncomment this tag.
#proxyclient 10.0.0.1/24

# TAG: proxysecret
# Radius proxy shared secret for all clients
# If not specified defaults to radiussecret
# Normally you do not need to uncomment this tag.
#proxysecret testing123

# DHCP Parameters

# TAG: dhcpif
# Ethernet interface to listen to.
# This is the network interface which is connected to the access points.
# In a typical configuration this tag should be set to eth1.
dhcpif

# TAG: dhcpmac
# Use specified MAC address.
# An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
# within the IANA range of addresses and is not allocated for other
# purposes.
# Normally you do not need to uncomment this tag.
#dhcpmac 00:00:5E:00:02:00

# TAG: lease
# Time before DHCP lease expires
# Normally you do not need to uncomment this tag.
#lease 600

# Universal access method (UAM) parameters

# TAG: uamserver
# URL of web server handling authentication.
uamserver

# TAG: uamhomepage
# URL of welcome homepage.
# Unauthenticated users will be redirected to this URL. If not specified
# users will be redirected to the uamserver instead.
# Normally you do not need to uncomment this tag.
uamhomepage

# TAG: uamsecret
# Shared between chilli and authentication web server
uamsecret

# TAG: uamlisten
# IP address to listen to for authentication requests
# Do not uncomment this tag unless you are an experienced user!
#uamlisten 192.168.182.1

# TAG: uamport
# TCP port to listen to for authentication requests
# Do not uncomment this tag unless you are an experienced user!
#uamport 3990

# TAG: uamallowed
# Comma separated list of domain names, IP addresses or network segments
# the client can access without first authenticating.
# It is possible to specify this tag multiple times.
# Normally you do not need to uncomment this tag.
#uamallowed www.chillispot.org,10.11.12.0/24

# TAG: uamanydns
# If this flag is given unauthenticated users are allowed to use
# any DNS server.
# Normally you do not need to uncomment this tag.
#uamanydns

# MAC authentication

# TAG: macauth
# If this flag is given users will be authenticated only on their MAC
# address.
# Normally you do not need to uncomment this tag.
#macauth

# TAG: macallowed
# List of MAC addresses.
# The MAC addresses specified in this list will be authenticated only on
# their MAC address.
# This tag is ignored if the macauth tag is given.
# It is possible to specify this tag multiple times.
# Normally you do not need to uncomment this tag.
#macallowed 00-0A-5E-AC-BE-51,00-30-1B-3C-32-E9

# TAG: macpasswd
# Password to use for MAC authentication.
# Normally you do not need to uncomment this tag.
#macpasswd password

# TAG: macsuffix
# Suffix to add to MAC address in order to form the username.
# Normally you do not need to uncomment this tag.
#macsuffix suffix