a log from k3b "showing" the error:
......................................................................................... ... ... Track 01: 214 of 695 MB written (fifo 100%) [buf 87%] 8.0x. Track 01: 215 of 695 MB written (fifo 100%) [buf 90%] 8.6x. Track 01: 216 of 695 MB written (fifo 97%) [buf 90%] 8.0x. Track 01: 217 of 695 MB written (fifo 100%) [buf 93%] 8.5x. Track 01: 218 of 695 MB written (fifo 100%) [buf 93%] 8.1x. Track 01: 219 of 695 MB written (fifo 99%) [buf 93%] 8.3x. Track 01: 220 of 695 MB written (fifo 100%) [buf 87%] 8.0x. Track 01: 221 of 695 MB written (fifo 100%) [buf 96%] 8.6x. Track 01: 222 of 695 MB written (fifo 100%) [buf 90%] 8.7x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 01 BC C7 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0B 00 00 00 00 57 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x57 Qual 0x00 (unable to recover table-of-contents) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.015s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 233191424 bytes Writing time: 201.495s Average write speed 24.2x. Min drive buffer fill was 78% Fixating... Fixating time: 0.005s Errno: 5 (Input/output error), start/stop unit scsi sendcmd: no error CDB: 1B 00 00 00 02 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0B 00 00 00 00 09 01 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s /usr/bin/wodim: Cannot eject media. /usr/bin/wodim: fifo had 3865 puts and 3674 gets. /usr/bin/wodim: fifo was 0 times empty and 2602 times full, min fill was 96%.
cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=8 -dao driveropts=burnfree -eject -data -tsize=356254s -
Thanks
a log from k3b "showing" the error:
....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ..... ... ...
Track 01: 214 of 695 MB written (fifo 100%) [buf 87%] 8.0x.
Track 01: 215 of 695 MB written (fifo 100%) [buf 90%] 8.6x.
Track 01: 216 of 695 MB written (fifo 97%) [buf 90%] 8.0x.
Track 01: 217 of 695 MB written (fifo 100%) [buf 93%] 8.5x.
Track 01: 218 of 695 MB written (fifo 100%) [buf 93%] 8.1x.
Track 01: 219 of 695 MB written (fifo 99%) [buf 93%] 8.3x.
Track 01: 220 of 695 MB written (fifo 100%) [buf 87%] 8.0x.
Track 01: 221 of 695 MB written (fifo 100%) [buf 96%] 8.6x.
Track 01: 222 of 695 MB written (fifo 100%) [buf 90%] 8.7x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 01 BC C7 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0B 00 00 00 00 57 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x57 Qual 0x00 (unable to recover table-of-contents) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.015s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 233191424 bytes
Writing time: 201.495s
Average write speed 24.2x.
Min drive buffer fill was 78%
Fixating...
Fixating time: 0.005s
Errno: 5 (Input/output error), start/stop unit scsi sendcmd: no error
CDB: 1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0B 00 00 00 00 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
/usr/bin/wodim: Cannot eject media.
/usr/bin/wodim: fifo had 3865 puts and 3674 gets.
/usr/bin/wodim: fifo was 0 times empty and 2602 times full, min fill was 96%.
cdrecord command: ------- ------- --
-------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=8 -dao driveropts=burnfree -eject -data -tsize=356254s -
Thanks