| 2012-04-28 01:16:14 |
Tommy Trussell |
bug |
|
|
added bug |
| 2012-04-28 01:27:06 |
Tommy Trussell |
tags |
|
apport-collected precise |
|
| 2012-04-28 01:27:07 |
Tommy Trussell |
description |
My apologies if I'm reporting against the wrong package.
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
I found a workable procedure at http://ubuntuforums.org/showthread.php?t=1879096
Using that procedure:
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed. |
My apologies if I'm reporting against the wrong package.
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
I found a workable procedure at http://ubuntuforums.org/showthread.php?t=1879096
Using that procedure:
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu7
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: aem 1840 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 45'
Mixer name : 'Realtek ALC272X'
Components : 'HDA:10ec0272,10250349,00100001'
Controls : 17
Simple ctrls : 9
CurrentDmesg:
[ 36.752051] eth0: no IPv6 routers present
[ 60.416044] eth2: no IPv6 routers present
[ 128.427405] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 133.246964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.608047] eth2: no IPv6 routers present
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=4edc06f9-2880-4f7f-a3e0-c6f6e515ad8c
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
MachineType: Acer AOD260
NonfreeKernelModules: wl
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=eff2de8f-2e1c-4c27-9de4-7de1ae4ce8c0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
RelatedPackageVersions:
linux-restricted-modules-3.2.0-24-generic-pae N/A
linux-backports-modules-3.2.0-24-generic-pae N/A
linux-firmware 1.79
SourcePackage: linux
Tags: precise precise
Uname: Linux 3.2.0-24-generic-pae i686
UpgradeStatus: Upgraded to precise on 2012-04-27 (0 days ago)
UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare
dmi.bios.date: 07/13/2010
dmi.bios.vendor: Acer
dmi.bios.version: V3.10(DDR2)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V3.10(DDR2)
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V3.10(DDR2)
dmi.modalias: dmi:bvnAcer:bvrV3.10(DDR2):bd07/13/2010:svnAcer:pnAOD260:pvrV3.10(DDR2):rvnAcer:rnAOD260:rvrV3.10(DDR2):cvnAcer:ct10:cvrV3.10(DDR2):
dmi.product.name: AOD260
dmi.product.version: V3.10(DDR2)
dmi.sys.vendor: Acer |
|
| 2012-04-28 01:27:08 |
Tommy Trussell |
attachment added |
|
AcpiTables.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110900/+files/AcpiTables.txt |
|
| 2012-04-28 01:27:10 |
Tommy Trussell |
attachment added |
|
AlsaDevices.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110901/+files/AlsaDevices.txt |
|
| 2012-04-28 01:27:11 |
Tommy Trussell |
attachment added |
|
BootDmesg.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110902/+files/BootDmesg.txt |
|
| 2012-04-28 01:27:12 |
Tommy Trussell |
attachment added |
|
Card0.Amixer.values.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110903/+files/Card0.Amixer.values.txt |
|
| 2012-04-28 01:27:14 |
Tommy Trussell |
attachment added |
|
Card0.Codecs.codec.0.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110904/+files/Card0.Codecs.codec.0.txt |
|
| 2012-04-28 01:27:16 |
Tommy Trussell |
attachment added |
|
IwConfig.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110905/+files/IwConfig.txt |
|
| 2012-04-28 01:27:18 |
Tommy Trussell |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110906/+files/Lspci.txt |
|
| 2012-04-28 01:27:19 |
Tommy Trussell |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110907/+files/Lsusb.txt |
|
| 2012-04-28 01:27:21 |
Tommy Trussell |
attachment added |
|
PciMultimedia.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110908/+files/PciMultimedia.txt |
|
| 2012-04-28 01:27:22 |
Tommy Trussell |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110909/+files/ProcCpuinfo.txt |
|
| 2012-04-28 01:27:24 |
Tommy Trussell |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110910/+files/ProcInterrupts.txt |
|
| 2012-04-28 01:27:25 |
Tommy Trussell |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110911/+files/ProcModules.txt |
|
| 2012-04-28 01:27:27 |
Tommy Trussell |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110912/+files/PulseList.txt |
|
| 2012-04-28 01:27:29 |
Tommy Trussell |
attachment added |
|
RfKill.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110913/+files/RfKill.txt |
|
| 2012-04-28 01:27:30 |
Tommy Trussell |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110914/+files/UdevDb.txt |
|
| 2012-04-28 01:27:32 |
Tommy Trussell |
attachment added |
|
UdevLog.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110915/+files/UdevLog.txt |
|
| 2012-04-28 01:27:34 |
Tommy Trussell |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/990222/+attachment/3110916/+files/WifiSyslog.txt |
|
| 2012-04-28 01:35:34 |
Tommy Trussell |
attachment added |
|
/var/log/jockey.log from when BCM4313 driver failed https://bugs.launchpad.net/ubuntu/+source/broadcom-sta/+bug/990222/+attachment/3110921/+files/jockey.log |
|
| 2012-04-28 20:53:33 |
Launchpad Janitor |
broadcom-sta (Ubuntu): status |
New |
Confirmed |
|
| 2012-05-05 00:02:51 |
David Cutting |
bug |
|
|
added subscriber David Cutting |
| 2012-05-05 11:06:08 |
Shriramana Sharma |
marked as duplicate |
|
987364 |
|
| 2012-09-02 17:09:53 |
isden |
bug |
|
|
added subscriber isden |
| 2013-11-17 05:25:05 |
penalvch |
summary |
Broadcom BCM4313 Not Usable on Upgrade to 12.04 Precise |
14e4:4727 Broadcom BCM4313 Not Usable on Upgrade to 12.04 Precise |
|
| 2013-11-17 05:26:08 |
penalvch |
removed duplicate marker |
987364 |
|
|
| 2013-11-17 05:37:49 |
penalvch |
description |
My apologies if I'm reporting against the wrong package.
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
I found a workable procedure at http://ubuntuforums.org/showthread.php?t=1879096
Using that procedure:
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu7
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: aem 1840 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 45'
Mixer name : 'Realtek ALC272X'
Components : 'HDA:10ec0272,10250349,00100001'
Controls : 17
Simple ctrls : 9
CurrentDmesg:
[ 36.752051] eth0: no IPv6 routers present
[ 60.416044] eth2: no IPv6 routers present
[ 128.427405] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 133.246964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.608047] eth2: no IPv6 routers present
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=4edc06f9-2880-4f7f-a3e0-c6f6e515ad8c
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
MachineType: Acer AOD260
NonfreeKernelModules: wl
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=eff2de8f-2e1c-4c27-9de4-7de1ae4ce8c0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
RelatedPackageVersions:
linux-restricted-modules-3.2.0-24-generic-pae N/A
linux-backports-modules-3.2.0-24-generic-pae N/A
linux-firmware 1.79
SourcePackage: linux
Tags: precise precise
Uname: Linux 3.2.0-24-generic-pae i686
UpgradeStatus: Upgraded to precise on 2012-04-27 (0 days ago)
UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare
dmi.bios.date: 07/13/2010
dmi.bios.vendor: Acer
dmi.bios.version: V3.10(DDR2)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V3.10(DDR2)
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V3.10(DDR2)
dmi.modalias: dmi:bvnAcer:bvrV3.10(DDR2):bd07/13/2010:svnAcer:pnAOD260:pvrV3.10(DDR2):rvnAcer:rnAOD260:rvrV3.10(DDR2):cvnAcer:ct10:cvrV3.10(DDR2):
dmi.product.name: AOD260
dmi.product.version: V3.10(DDR2)
dmi.sys.vendor: Acer |
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
I found a workable procedure at http://ubuntuforums.org/showthread.php?t=1879096 :
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu7
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: aem 1840 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 45'
Mixer name : 'Realtek ALC272X'
Components : 'HDA:10ec0272,10250349,00100001'
Controls : 17
Simple ctrls : 9
CurrentDmesg:
[ 36.752051] eth0: no IPv6 routers present
[ 60.416044] eth2: no IPv6 routers present
[ 128.427405] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 133.246964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.608047] eth2: no IPv6 routers present
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=4edc06f9-2880-4f7f-a3e0-c6f6e515ad8c
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
MachineType: Acer AOD260
NonfreeKernelModules: wl
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=eff2de8f-2e1c-4c27-9de4-7de1ae4ce8c0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
RelatedPackageVersions:
linux-restricted-modules-3.2.0-24-generic-pae N/A
linux-backports-modules-3.2.0-24-generic-pae N/A
linux-firmware 1.79
SourcePackage: linux
Tags: precise precise
Uname: Linux 3.2.0-24-generic-pae i686
UpgradeStatus: Upgraded to precise on 2012-04-27 (0 days ago)
UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare
dmi.bios.date: 07/13/2010
dmi.bios.vendor: Acer
dmi.bios.version: V3.10(DDR2)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V3.10(DDR2)
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V3.10(DDR2)
dmi.modalias: dmi:bvnAcer:bvrV3.10(DDR2):bd07/13/2010:svnAcer:pnAOD260:pvrV3.10(DDR2):rvnAcer:rnAOD260:rvrV3.10(DDR2):cvnAcer:ct10:cvrV3.10(DDR2):
dmi.product.name: AOD260
dmi.product.version: V3.10(DDR2)
dmi.sys.vendor: Acer |
|
| 2013-11-17 05:37:59 |
penalvch |
description |
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
I found a workable procedure at http://ubuntuforums.org/showthread.php?t=1879096 :
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu7
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: aem 1840 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 45'
Mixer name : 'Realtek ALC272X'
Components : 'HDA:10ec0272,10250349,00100001'
Controls : 17
Simple ctrls : 9
CurrentDmesg:
[ 36.752051] eth0: no IPv6 routers present
[ 60.416044] eth2: no IPv6 routers present
[ 128.427405] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 133.246964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.608047] eth2: no IPv6 routers present
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=4edc06f9-2880-4f7f-a3e0-c6f6e515ad8c
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
MachineType: Acer AOD260
NonfreeKernelModules: wl
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=eff2de8f-2e1c-4c27-9de4-7de1ae4ce8c0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
RelatedPackageVersions:
linux-restricted-modules-3.2.0-24-generic-pae N/A
linux-backports-modules-3.2.0-24-generic-pae N/A
linux-firmware 1.79
SourcePackage: linux
Tags: precise precise
Uname: Linux 3.2.0-24-generic-pae i686
UpgradeStatus: Upgraded to precise on 2012-04-27 (0 days ago)
UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare
dmi.bios.date: 07/13/2010
dmi.bios.vendor: Acer
dmi.bios.version: V3.10(DDR2)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V3.10(DDR2)
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V3.10(DDR2)
dmi.modalias: dmi:bvnAcer:bvrV3.10(DDR2):bd07/13/2010:svnAcer:pnAOD260:pvrV3.10(DDR2):rvnAcer:rnAOD260:rvrV3.10(DDR2):cvnAcer:ct10:cvrV3.10(DDR2):
dmi.product.name: AOD260
dmi.product.version: V3.10(DDR2)
dmi.sys.vendor: Acer |
Got wireless working again in my Acer Aspire One D260, with Broadcom BCM4313 driver. It has worked with only minor difficulty in prior versions of Ubuntu (often you have to connect it to Ethernet to download the driver, then in past releases you're good to go.),
TODAY I did a regular upgrade to 12.04 Precise (GUI tool via update-manager) and it left me without working wireless. The Broadcom-STA driver showed up in the "additional drivers" tool, but it won't install, with lots of strange messages in /var/log/jockey.log
WORKAROUND: http://ubuntuforums.org/showthread.php?t=1879096 :
1) removed a package -- I believe it was bcmwl-kernel-source
2) added two lines to /etc/modprobe.d/blacklist.conf
blacklist bcma
blacklist brcm80211
3) installed:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
(which drew in 11 other packages including b43-fwcutter)
Interestingly, during the installation some package (not sure which) coughed up a message with the PCI ID of the Broadcom BCM4313 -- 14e4:4727 -- and said it was aborting because that device isn't supported. And BCM4313 is conspicuously absent from the firmware-b43-installer package, so I bet that's the one that coughed.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu7
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: aem 1840 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 45'
Mixer name : 'Realtek ALC272X'
Components : 'HDA:10ec0272,10250349,00100001'
Controls : 17
Simple ctrls : 9
CurrentDmesg:
[ 36.752051] eth0: no IPv6 routers present
[ 60.416044] eth2: no IPv6 routers present
[ 128.427405] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 133.246964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.608047] eth2: no IPv6 routers present
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=4edc06f9-2880-4f7f-a3e0-c6f6e515ad8c
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
MachineType: Acer AOD260
NonfreeKernelModules: wl
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=eff2de8f-2e1c-4c27-9de4-7de1ae4ce8c0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
RelatedPackageVersions:
linux-restricted-modules-3.2.0-24-generic-pae N/A
linux-backports-modules-3.2.0-24-generic-pae N/A
linux-firmware 1.79
SourcePackage: linux
Tags: precise precise
Uname: Linux 3.2.0-24-generic-pae i686
UpgradeStatus: Upgraded to precise on 2012-04-27 (0 days ago)
UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare
dmi.bios.date: 07/13/2010
dmi.bios.vendor: Acer
dmi.bios.version: V3.10(DDR2)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V3.10(DDR2)
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V3.10(DDR2)
dmi.modalias: dmi:bvnAcer:bvrV3.10(DDR2):bd07/13/2010:svnAcer:pnAOD260:pvrV3.10(DDR2):rvnAcer:rnAOD260:rvrV3.10(DDR2):cvnAcer:ct10:cvrV3.10(DDR2):
dmi.product.name: AOD260
dmi.product.version: V3.10(DDR2)
dmi.sys.vendor: Acer |
|
| 2013-11-17 05:44:22 |
penalvch |
broadcom-sta (Ubuntu): importance |
Undecided |
Medium |
|
| 2013-11-17 05:44:22 |
penalvch |
broadcom-sta (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2013-11-17 05:46:41 |
penalvch |
tags |
apport-collected precise |
apport-collected bios-outdated-3.16 precise regression-release |
|
| 2014-01-17 04:17:20 |
Launchpad Janitor |
broadcom-sta (Ubuntu): status |
Incomplete |
Expired |
|
