Comment 11 for bug 274624

Hi,

Here are the logs for the command you asked me to do.

I did one with UBUNTU 7.10 and one with UBUNTU 8.04.

root@michel-7-10:/home/michel# sudo wodim -v dev=/dev/hdc
driveropts=burnfree /home/michel/Vidéos/THE_CONTRACT.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H55N'
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 92160 kB/s 523x CD 66x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 4330 MB
Total size: 4973 MB (492:43.38) = 2217254 sectors
Lout start: 4973 MB (492:45/29) = 2217254 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 77850
Speed set to 16620 KB/s
Starting to write CD/DVD at speed 13.0 in real unknown mode for single
session.
Last chance to quit, starting real write i 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 4330 of 4330 MB written (fifo 100%) [buf 91%] 12.6x.^[[3~
Track 01: Total bytes read/written: 4540936192/4540936192 (2217254 sectors).
Writing time: 360.224s
Average write speed 10.3x.
Min drive buffer fill was 0%
Total of 2259 possible drive buffer underruns predicted.
Fixating...
Fixating time: 14.548s
wodim: fifo had 71525 puts and 71525 gets.
wodim: fifo was 0 times empty and 9159 times full, min fill was 81%.
root@michel-7-10:/home/michel#

root@michel-western:/home/michel# sudo wodim -v dev=/dev/scd0
driveropts=burnfree /home/michel/Vidéos/STREET_KINGS.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H55N'
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 119466 kB/s 678x CD 86x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 4364 MB
Total size: 5012 MB (496:33.72) = 2234529 sectors
Lout start: 5012 MB (496:35/54) = 2234529 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 60575
Speed set to 16620 KB/s
Starting to write CD/DVD at speed 13.0 in real unknown mode for single
session.
Last chance to quit, starting real write i 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 2 of 4364 MB written (fifo 99%) [buf 95%] 0.2x.Errno: 5
(Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 05 73 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
(ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s

write track data: error after 2856960 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing time: 48.543s
Average write speed 111.0x.
Min drive buffer fill was 95%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 2.996s timeout 1000s
Fixating time: 57.173s
wodim: fifo had 236 puts and 46 gets.
wodim: fifo was 0 times empty and 10 times full, min fill was 93%.
root@michel-western:/home/michel#

Hope this help.

Michel