© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
bbfa235
(Get the code!)
I have the same problem. None of the cd burning applications manage to burn successfully. I have also upgraded from Feisty to Gutsy. Here is the output from k3b:
System
-------
K3b Version: 1.0.3
KDE Version: 3.5.8
QT Version: 3.3.7
Kernel: 2.6.22-14-generic
Devices
-------
LG CD-RW CED-8080B 1.20 (/dev/scd1, ) [CD-R, CD-RW, CD-ROM] [Error] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
PIONEER DVD-ROM DVD-115 1.24 (/dev/scd0, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]
Used versions
-------
cdrecord: 1.1.6
cdrecord
-------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/scd1'
devname: '/dev/scd1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 576
TOC Type: 0 = CD-DA
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LG '
Identification : 'CD-RW CED-8080B '
Revision : '1.20'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
Drive DMA Speed: 93495 kB/s 531x CD 67x DVD
FIFO size : 12582912 = 12288 KB
Encoding speed : 153x (11416 sectors/s) for libedc from Heiko Eißfeldt
pregap1: -1
Track 01: audio 22 MB (02:12.28) no preemp
Track 02: audio 29 MB (02:54.72) no preemp pregapsize: 0
Track 03: audio 36 MB (03:38.97) no preemp pregapsize: 0
Track 04: audio 27 MB (02:42.21) no preemp pregapsize: 0
Track 05: audio 39 MB (03:52.46) no preemp pregapsize: 0
Track 06: audio 40 MB (03:59.66) no preemp pregapsize: 0
Track 07: audio 37 MB (03:41.28) no preemp pregapsize: 0
Track 08: audio 22 MB (02:14.33) no preemp pregapsize: 0
Track 09: audio 40 MB (03:59.82) no preemp pregapsize: 0
Track 10: audio 23 MB (02:18.40) no preemp pregapsize: 0
Track 11: audio 51 MB (05:04.73) no preemp pregapsize: 0
Total size: 369 MB (36:38.89) = 164917 sectors
Lout start: 370 MB (36:40/67) = 164917 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
Speed set to 1411 KB/s
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 194929
Starting to write CD/DVD at speed 8.0 in dummy RAW/RAW96R mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
/usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -11634 from ATIP
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D2 8E 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
/usr/bin/wodim: Could not write Lead-in.
Waiting for reader process to fill input buffer ... input buffer ready.
Writing lead-in at sector -11634
write leadin data: error after 0 bytes
Writing time: 3.253s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd1 speed=8 -raw96r -dummy textfile=