Comment 100 for bug 149076

Revision history for this message
Konrad Siwczyński (k-siwczynski) wrote :

Same error here. My output:

Devices
-----------------------
PBDS DS-8A1P CF12 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R dwuwarstwowa, DVD+R, DVD+RW, DVD+R dwuwarstwowa) [DVD-ROM, DVD-R sekwencyjna, DVD-R dwuwarstwowa sekwencyjna, DVD+R dwuwarstwowa, DVD-RAM, DVD-RW w trybie ograniczonego zastępowania, DVD-RW sekwencyjny, DVD+RW, DVD+R, DVD+R dwuwarstwowa, CD-ROM, CD-R, CD-RW] [Sesja naraz (SAO), TAO, RAW, SAO/R96P, SAO/R96R, Surowe/R16, Surowe/R96P, Surowe/R96R, Ograniczone zastępowanie., Przeskok warstwy] [%7]

System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version: 4.6.2
Kernel: 2.6.32-19-generic

Used versions
-----------------------
cdrecord: 1.1.10

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PBDS '
Identification : 'DS-8A1P '
Revision : 'CF12'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1029888 = 1005 KB
FIFO size : 12582912 = 12288 KB
Speed set to 11080 KB/s
Track 01: data 2591 MB
Total size: 2975 MB (294:47.89) = 1326592 sectors
Lout start: 2975 MB (294:49/67) = 1326592 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 968512
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 14 3E 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 52.625s timeout 200s
/usr/bin/wodim: Cannot open new session.
input buffer ready.
Writing time: 52.681s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=1326592s -

Regards.