Ralf I have noticed the same thing with one of the things I tried to prioritize. I am wondering if it is a timing issue. That is, if rtirq is being run too soon before the irq driver is fully operating. It was obvious to me because the PID for mine is so much higher than any of the others. Try a sudo /etc/init.d/rtirq restart after boot and things have settled. Does that make a difference?
With sys v init everything is run in order, that is not the case with systemd which parallel processes things. It may be that some small delay in the script would fix things.
Mine: after boot:
517 FF 90 - 130 0.1 S irq/17-snd_ice1
512 FF 85 - 125 0.0 S irq/19-snd_ens1
47 FF 50 - 90 0.0 S irq/9-acpi
77 FF 50 - 90 0.0 S irq/20-ehci_hcd
78 FF 50 - 90 0.0 S irq/23-ehci_hcd
79 FF 50 - 90 0.0 S irq/41-xhci_hcd
81 FF 50 - 90 0.0 S irq/12-i8042
82 FF 50 - 90 0.0 S irq/1-i8042
83 FF 50 - 90 0.0 S irq/8-rtc0
153 FF 50 - 90 0.0 S irq/16-pata_jmi
160 FF 50 - 90 0.0 S irq/43-ahci
408 FF 50 - 90 0.0 S irq/44-mei_me
446 FF 50 - 90 0.0 S irq/45-i915
1315 FF 50 - 90 0.0 S irq/42-eth0
Mine after rtirq restart:
517 FF 90 - 130 0.1 S irq/17-snd_ice1
512 FF 85 - 125 0.0 S irq/19-snd_ens1
1315 FF 80 - 120 0.0 S irq/42-eth0
47 FF 50 - 90 0.0 S irq/9-acpi
In your case the PID is sooner than the two cards that did get grabbed, but it may still take some time to get fully initialized.
I use RTIRQ_NAME_LIST="snd_ice1712 snd eth0" because:
a) I am too lazy to switch the two sound cards in their physical slots and the ensoniq interferes with the ice if higher.
Ralf I have noticed the same thing with one of the things I tried to prioritize. I am wondering if it is a timing issue. That is, if rtirq is being run too soon before the irq driver is fully operating. It was obvious to me because the PID for mine is so much higher than any of the others. Try a sudo /etc/init.d/rtirq restart after boot and things have settled. Does that make a difference?
With sys v init everything is run in order, that is not the case with systemd which parallel processes things. It may be that some small delay in the script would fix things.
Mine: after boot:
517 FF 90 - 130 0.1 S irq/17-snd_ice1
512 FF 85 - 125 0.0 S irq/19-snd_ens1
47 FF 50 - 90 0.0 S irq/9-acpi
77 FF 50 - 90 0.0 S irq/20-ehci_hcd
78 FF 50 - 90 0.0 S irq/23-ehci_hcd
79 FF 50 - 90 0.0 S irq/41-xhci_hcd
81 FF 50 - 90 0.0 S irq/12-i8042
82 FF 50 - 90 0.0 S irq/1-i8042
83 FF 50 - 90 0.0 S irq/8-rtc0
153 FF 50 - 90 0.0 S irq/16-pata_jmi
160 FF 50 - 90 0.0 S irq/43-ahci
408 FF 50 - 90 0.0 S irq/44-mei_me
446 FF 50 - 90 0.0 S irq/45-i915
1315 FF 50 - 90 0.0 S irq/42-eth0
Mine after rtirq restart:
517 FF 90 - 130 0.1 S irq/17-snd_ice1
512 FF 85 - 125 0.0 S irq/19-snd_ens1
1315 FF 80 - 120 0.0 S irq/42-eth0
47 FF 50 - 90 0.0 S irq/9-acpi
In your case the PID is sooner than the two cards that did get grabbed, but it may still take some time to get fully initialized.
I use RTIRQ_NAME_ LIST="snd_ ice1712 snd eth0" because:
a) I am too lazy to switch the two sound cards in their physical slots and the ensoniq interferes with the ice if higher.
b) I want to play with AoIP as I have time.