Hello,
I have the same problem on Ubuntu 10.10. I have tried K3B, GnomeBaker and Brasero without any success. I get the following debug output from K3B. Could you please help me ? Thanks :
Devices ----------------------- HL-DT-ST DVD-RW GCA-4080N 0G34 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [TAO, Restricted Overwrite] [%7]
System ----------------------- K3b Version: 2.0.1 KDE Version: 4.5.1 (KDE 4.5.1) QT Version: 4.7.0 Kernel: 2.6.35-22-generic
Used versions ----------------------- cdrecord: 1.1.10
cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.10 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVD-RW GCA-4080N' Revision : '0G34' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0011 (DVD-R sequential recording) Profile: 0x0011 (DVD-R sequential recording) (current) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) Profile: 0x000A (CD-RW) Profile: 0x0008 (CD-ROM) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1114112 = 1088 KB Drive DMA Speed: 13667 kB/s 77x CD 9x DVD FIFO size : 12582912 = 12288 KB Speed set to 11080 KB/s Track 01: data 195 MB Total size: 224 MB (22:14.76) = 100107 sectors Lout start: 224 MB (22:16/57) = 100107 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2198389 Starting to write CD/DVD at speed 8.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... /usr/bin/wodim: Caught interrupt. Writing time: 77.116s /usr/bin/wodim: fifo had 191 puts and 0 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=100107s -
Thanks a lot
Adlene
Hello,
I have the same problem on Ubuntu 10.10. I have tried K3B, GnomeBaker and Brasero without any success. I get the following debug output from K3B. Could you please help me ? Thanks :
Devices ------- ------- --
-------
HL-DT-ST DVD-RW GCA-4080N 0G34 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [TAO, Restricted Overwrite] [%7]
System ------- ------- --
-------
K3b Version: 2.0.1
KDE Version: 4.5.1 (KDE 4.5.1)
QT Version: 4.7.0
Kernel: 2.6.35-22-generic
Used versions ------- ------- --
-------
cdrecord: 1.1.10
cdrecord ------- ------- --
-------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RW GCA-4080N'
Revision : '0G34'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 13667 kB/s 77x CD 9x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 11080 KB/s
Track 01: data 195 MB
Total size: 224 MB (22:14.76) = 100107 sectors
Lout start: 224 MB (22:16/57) = 100107 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2198389
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
/usr/bin/wodim: Caught interrupt.
Writing time: 77.116s
/usr/bin/wodim: fifo had 191 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command: ------- ------- --
-------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=100107s -
Thanks a lot
Adlene