Comment 16 for bug 1888256

Hy!

I've tried this reorder thing, and it's looks good!

I did this (this is our DEV, so another subs, but same setup):

openstack network create Flat1 --share --provider-network-type vlan --provider-physical-network vltrunk --provider-segment 712

openstack subnet create \
--gateway 193.224.110.94 \
--subnet-range 193.224.110.64/27 \
--allocation-pool start=193.224.110.65,end=193.224.110.90 \
--host-route destination=169.254.169.254/32,gateway=193.224.110.91 \
--dns-nameserver 193.224.161.70 --dns-nameserver 193.224.161.86 \
--network Flat1 Flat1-subnet-v4

openstack router create Flat1-Router

openstack port create --network Flat1 --fixed-ip ip-address=193.224.110.91 flat1-rtr-port

openstack router add port Flat1-Router flat1-rtr-port

openstack subnet create \
--subnet-range 2001:738:0:5b2::/64 \
--ip-version 6 --ipv6-address-mode slaac \
--network Flat1 Flat1-subnet-v6

This time the DHCP agents got IPv6 address too after adding the subnet, but there are no IPv6 address on flat1-rtr-port, and no spawned radvd processes on network nodes.

Thanks pointing this out!