Netplan

Bug #1862607
Comment #0

Comment 0 for bug 1862607

Revision history for this message

Frank Villaro (f-ran-k) wrote on 2020-02-10: [networkd] LLDP + EmitLLDP for ethernet nets

networkd has an option to emit LLDP messages over the interface:
LLDP=
Controls support for Ethernet LLDP packet reception. LLDP is a link-layer protocol commonly implemented on professional routers and bridges which announces which physical port a system is connected to, as well as other related data. Accepts a boolean or the special value "routers-only". When true, incoming LLDP packets are accepted and a database of all LLDP neighbors maintained. If "routers-only" is set only LLDP data of various types of routers is collected and LLDP data about other types of devices ignored (such as stations, telephones and others). If false, LLDP reception is disabled. Defaults to "routers-only". Use networkctl(1) to query the collected neighbor data. LLDP is only available on Ethernet links. See EmitLLDP= below for enabling LLDP packet emission from the local system.

EmitLLDP=
Controls support for Ethernet LLDP packet emission. Accepts a boolean parameter or the special values "nearest-bridge", "non-tpmr-bridge" and "customer-bridge". Defaults to false, which turns off LLDP packet emission. If not false, a short LLDP packet with information about the local system is sent out in regular intervals on the link. The LLDP packet will contain information about the local host name, the local machine ID (as stored in machine-id(5)) and the local interface name, as well as the pretty hostname of the system (as set in machine-info(5)). LLDP emission is only available on Ethernet links. Note that this setting passes data suitable for identification of host to the network and should thus not be enabled on untrusted networks, where such identification data should not be made available. Use this option to permit other systems to identify on which interfaces they are connected to this system. The three special values control propagation of the LLDP packets. The "nearest-bridge" setting permits propagation only to the nearest connected bridge, "non-tpmr-bridge" permits propagation across Two-Port MAC Relays, but not any other bridges, and "customer-bridge" permits propagation until a customer bridge is reached. For details about these concepts, see IEEE 802.1AB-2016[5]. Note that configuring this setting to true is equivalent to "nearest-bridge", the recommended and most restricted level of propagation. See LLDP= above for an option to enable LLDP reception.

In a entreprise context, it is very useful to have this option enabled so that the partner device (router, switch, ...) can recognise its partner.

I may be able to produce a patch for this but I only use networkd and not NetworkManager. What do you think ?

Cheers

networkd has an option to emit LLDP messages over the interface:
       LLDP=
           Controls support for Ethernet LLDP packet reception. LLDP is a link-layer protocol commonly implemented on professional routers and bridges which announces which physical port a system is connected to, as well as other related data. Accepts a boolean or the special value "routers-only". When true, incoming LLDP packets are accepted and a database of all LLDP neighbors maintained. If "routers-only" is set only LLDP data of various types of routers is collected and LLDP data about other types of devices ignored (such as stations, telephones and others). If false, LLDP reception is disabled. Defaults to "routers-only". Use networkctl(1) to query the collected neighbor data. LLDP is only available on Ethernet links. See EmitLLDP= below for enabling LLDP packet emission from the local system.

EmitLLDP=
           Controls support for Ethernet LLDP packet emission. Accepts a boolean parameter or the special values "nearest-bridge", "non-tpmr-bridge" and "customer-bridge". Defaults to false, which turns off LLDP packet emission. If not false, a short LLDP packet with information about the local system is sent out in regular intervals on the link. The LLDP packet will contain information about the local host name, the local machine ID (as stored in machine-id(5)) and the local interface name, as well as the pretty hostname of the system (as set in machine-info(5)). LLDP emission is only available on Ethernet links. Note that this setting passes data suitable for identification of host to the network and should thus not be enabled on untrusted networks, where such identification data should not be made available. Use this option to permit other systems to identify on which interfaces they are connected to this system. The three special values control propagation of the LLDP packets. The "nearest-bridge" setting permits propagation only to the nearest connected bridge, "non-tpmr-bridge" permits propagation across Two-Port MAC Relays, but not any other bridges, and "customer-bridge" permits propagation until a customer bridge is reached. For details about these concepts, see IEEE 802.1AB-2016[5]. Note that configuring this setting to true is equivalent to "nearest-bridge", the recommended and most restricted level of propagation. See LLDP= above for an option to enable LLDP reception.

In a entreprise context, it is very useful to have this option enabled so that the partner device (router, switch, ...) can recognise its partner.

I may be able to produce a patch for this but I only use networkd and not NetworkManager. What do you think ?

Cheers