Tried all of the microphone monitoring settings.
After clicking apply, I never hear sound from microphones,
and from auxiliary on the master channel.
I use the talkover switch and the volume is set correctly.
Because the sound of microphones and auxiliary recorded and broadcast well.
I just can't hear this sound (mics and auxiliary) when my headphone / master balance is set to 100% master channel.
I can only hear the sound when I have 100% preview and use the PFL switch for the microphone and the auxiliary.
I have the latest stable version of Mixxx 2.3 and all the latest operating system updates:
Microsoft Windows 10 Home X64 Version 10.0.19043 Build 19043.
My audio card is built in:
The name Realtek High Definition Audio
Device ID PNP INTELAUDIO \ FUNC_01 & VEN_10EC & DEV_0256 & SUBSYS_19E5320F & REV_1000 \ 4 & 24CA62FF & 0 & 0001
Driver C: \ WINDOWS \ SYSTEM32 \ DRIVERS \ RTKVHD64.SYS (6.0.1.8678,6.50 MB (6,811,424 bytes), 07/04/2021 20:40)
I tried on connected external USB cards and it is exactly the same.
Mic input 1 is set to the built-in realtek microphone,
auxiliary input to virtual cable.
for all microphone monitoring modes I cannot hear its sound to the master channel.
Unfortunately, it was the same in the previous version of Mixxx before the update.
Best regards.
Tried all of the microphone monitoring settings.
After clicking apply, I never hear sound from microphones,
and from auxiliary on the master channel.
I use the talkover switch and the volume is set correctly.
Because the sound of microphones and auxiliary recorded and broadcast well.
I just can't hear this sound (mics and auxiliary) when my headphone / master balance is set to 100% master channel.
I can only hear the sound when I have 100% preview and use the PFL switch for the microphone and the auxiliary.
I have the latest stable version of Mixxx 2.3 and all the latest operating system updates:
Microsoft Windows 10 Home X64 Version 10.0.19043 Build 19043.
My audio card is built in:
The name Realtek High Definition Audio
Device ID PNP INTELAUDIO \ FUNC_01 & VEN_10EC & DEV_0256 & SUBSYS_19E5320F & REV_1000 \ 4 & 24CA62FF & 0 & 0001
Driver C: \ WINDOWS \ SYSTEM32 \ DRIVERS \ RTKVHD64.SYS (6.0.1.8678,6.50 MB (6,811,424 bytes), 07/04/2021 20:40)
I tried on connected external USB cards and it is exactly the same.
Mic input 1 is set to the built-in realtek microphone,
auxiliary input to virtual cable.
for all microphone monitoring modes I cannot hear its sound to the master channel.
Unfortunately, it was the same in the previous version of Mixxx before the update.
Best regards.