Thanks, I could commission and deploy the machine after disabling the BMC configuration step.
After the machine booted, I manually installed impitool and ran 'ipmitool lan print' successfully.
After that, I released the machine, and commissioned again with the options "Skip configuring supported BMC controllers with a MAAS generated username and password" and "Allow SSH access and prevent machine powering off".
I ssh'ed into the machine, and ran 'apt-get install ipmitools'.
The command hanged for 2 minutes, and then finally finished: https://pastebin.canonical.com/p/n2YFPFt5nY/
I opened another SSH session, which took ~30s to open, and took the output from dmesg: https://pastebin.canonical.com/p/PkQXCy4gP4/
This was using the following config:
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04.4 LTS
Release: 18.04
Codename: bionic
$ uname -r
4.15.0-96-generic
The machine is still in this state and I can perform more tests.
Thanks, I could commission and deploy the machine after disabling the BMC configuration step.
After the machine booted, I manually installed impitool and ran 'ipmitool lan print' successfully.
After that, I released the machine, and commissioned again with the options "Skip configuring supported BMC controllers with a MAAS generated username and password" and "Allow SSH access and prevent machine powering off". /pastebin. canonical. com/p/n2YFPFt5n Y/ /pastebin. canonical. com/p/PkQXCy4gP 4/
I ssh'ed into the machine, and ran 'apt-get install ipmitools'.
The command hanged for 2 minutes, and then finally finished: https:/
I opened another SSH session, which took ~30s to open, and took the output from dmesg:
https:/
This was using the following config:
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04.4 LTS
Release: 18.04
Codename: bionic
$ uname -r
4.15.0-96-generic
The machine is still in this state and I can perform more tests.