Comment 2 for bug 1519470
Revision history for this message
| Jeff Lane (bladernr) wrote Re: Deployment always fails when creating a RAID storage config | #2 |
© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
1b1ed1a
(Get the code!)
OK, next I set the default schema to flat and re-commissioned and did a deployment. That too was successful. So after testing that, I "unmounted" and removed the formatting for sda-part1.
I created sdb-part1 and then selected both sda-part1 and sdb-part1 and clicked "Create RAID".
Then I created a RAID0 using those partititons, formatted as ext4 and mounted at /
That left me with this:
Used disks and partitions
Name|Model|Serial Boot Device type Used for
md0 RAID 0 ext4 formatted filesystem mounted at /
sda Physical MBR partitioned with 1 partition
sda-part1 Partition Active raid-0 device for md0
sdb Physical GPT partitioned with 1 partition
sdb-part1 Partition Active raid-0 device for md0
Not sure why it opts for GPT on the one I just created, but MBR when it automatically cretaes a flat system, that seems discongruous.