Comment 2 for bug 1033944

on panda panda 4460 with the same build
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-stable-blob/#build=23

after following the same steps the board shuts down instead of going in suspend mode

root@android:/ # [ 89.442993] request_suspend)
[ 89.454528] DSSCOMP: dsscomp_early_suspend
[ 89.484954] DSSCOMP: blanked screen
[ 89.586212] PM: Syncing filesystems ... done.
[ 89.621490] Freezing user space processes ...
[ 89.648040] Freezing remaining freezable tas.
[ 89.675933] Suspending console(s) (use no_co)
[ 89.918762] PVR: PVRSRVDriverSuspend(pDevice)
[ 89.918762] PVR: SysSystemPrePowerState: Ent3
[ 89.919097] PVR: Uninstalling device LISR on0
[ 89.919097] PVR: DisableSystemClocks: Disabls
[ 89.937255] PM: suspend of devices complete s
[ 89.947235] in hpd work 0, state=2
[ 89.947387] PM: late suspend of devices comps
[ 89.947448] Disabling non-boot CPUs ...
[ 89.974700] CPU1: shutdown
[ 93.177734] Suspended for 3.201 seconds
[ 93.177734] wakeup wake lock: alarm
[ 93.177978] Enabling non-boot CPUs ...
[ 93.246765] CPU1: Booted secondary processor
[ 93.246765] Calibrating delay loop (skipped)U
[ 93.246765] CPU1: Unknown IPI message 0x1
[ 93.247650] thermal_cooling_dev_register:Fouu
[ 93.247741] thermal_init_thermal_state: Gettn
[ 93.247741] thermal_request_temp
[ 93.247772] omap_safe_zone:hot spot temp 5786
[ 93.247802] cpufreq_apply_cooling: Unthrottl0
[ 93.247802] omap_thermal_step_freq_up: tempe0
[ 93.247863] thermal_request_temp got 47800
[ 93.247863] CPU1 is up
[ 93.639221] PM: early resume of devices comps
[ 94.283630] PVR: PVRSRVDriverResume(pDevice=)
[ 94.283630] PVR: SysSystemPostPowerState: En0
[ 94.283630] PVR: EnableSystemClocks: Enablins
[ 94.283630] PVR: Installing device LISR SGX 0
[ 94.283630] PVR_K:(Error): EnableSGXClocks: ]
[ 94.332275] in hpd work 1, state=0
[ 94.458251] omapdss DISPC error: timeout waiC
[ 94.491607] PVR_K:(Error): EnableSGXClocks: ]
[ 94.532318] in hpd work 2, state=1
[ 94.697174] PM: resume of devices complete as
[ 94.938568] Restarting tasks ... done.
[ 94.960601] suspend: exit suspend, ret = 0 ()
[ 95.199584] edid[000] = 00 ff ff ff ff ff ff0
[ 95.206726] edid[010] = 16 16 01 03 80 30 1b7
[ 95.214752] edid[020] = 0a 50 54 a5 4b 00 711
[ 95.222167] edid[030] = 01 01 01 01 01 01 02c
[ 95.229339] edid[040] = 45 00 dd 0c 11 00 008
[ 95.236602] edid[050] = 37 46 32 35 54 30 4c4
[ 95.243896] edid[060] = 45 4c 4c 20 53 54 32d
[ 95.251220] edid[070] = 00 38 4c 1e 53 11 000
[ 95.259399] edid[080] = 02 03 1f f1 4c 90 052
[ 95.266693] edid[090] = 13 23 09 07 07 65 032
[ 95.274017] edid[0a0] = 3a 80 18 71 38 2d 400
[ 95.280761] edid[0b0] = 1e 01 1d 80 18 71 1c1
[ 95.288543] edid[0c0] = 00 00 9e 01 1d 00 72d
[ 95.295898] edid[0d0] = 0c 11 00 00 1e 8c 0a6
[ 95.303100] edid[0e0] = 00 dd 0c 11 00 00 180
[ 95.311218] edid[0f0] = 00 00 00 00 00 00 00f
[ 95.318572] edid[100] = 00 00 00 00 00 00 000
[ 95.329376] edid[110] = 00 00 00 00 00 00 000
[ 95.336822] edid[120] = 00 00 00 00 00 00 000
[ 95.352844] edid[130] = 00 00 00 00 00 00 000
[ 95.361541] edid[140] = 00 00 00 00 00 00 000
[ 95.368286] edid[150] = 00 00 00 00 00 00 000
[ 95.377319] edid[160] = 00 00 00 00 00 00 000
[ 95.384643] edid[170] = 00 00 00 00 00 00 000
[ 95.391876] edid[180] = 00 00 00 00 00 00 000
[ 95.399169] edid[190] = 00 00 00 00 00 00 000
[ 95.406646] edid[1a0] = 00 00 00 00 00 00 000
[ 95.420867] edid[1b0] = 00 00 00 00 00 00 000
[ 95.428100] edid[1c0] = 00 00 00 00 00 00 000
[ 95.435516] edid[1d0] = 00 00 00 00 00 00 000
[ 95.442901] edid[1e0] = 00 00 00 00 00 00 000
[ 95.450347] edid[1f0] = 00 00 00 00 00 00 000
[ 95.457672] panel size 48 by 27
[ 95.491790] hdmi: clearing EDID info
[ 95.495941] hdmi_set_timings: hdmi.mode=1
[ 95.591400] omapdss DISPC error: timeout waiC
[ 96.010864] PM: Syncing filesystems ... done.
[ 96.042541] Freezing user space processes ...
[ 96.077301] Freezing remaining freezable tas.
[ 96.118103] Suspending console(s) (use no_co)