Comment 7 for bug 1231266

Hi,

here is the output of "print" in u-boot prompt with Samsung Arndale build 199 and Linaro Image Tools version 645:

==============================================================================================

ARNDALE5250 # print
baudrate=115200
bootcmd=if mmc rescan ${mmcdev}; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; fi; fi; fi
bootdelay=3
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttySAC2,115200n8
ethact=asx0
ethaddr=02:74:ac:95:16:33
loadaddr=0x42000000
loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr
loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage
mmcargs=setenv bootargs console=${console} root=${mmcroot}
mmcboot=echo Booting from mmc${mmcdev} ...; run mmcargs; bootm ${loadaddr}
mmcdev=0:2
mmcroot=/dev/mmcblk0p2 rw
preboot=usb start
stderr=serial
stdin=serial
stdout=serial
usbethaddr=02:74:ac:95:16:33

Environment size: 731/16380 bytes
ARNDALE5250 #

board boot successfully after trigger boot.txt commands.

I am attaching my boot.txt here it is same as above ;