This' happenned not only in one footprint. As could be seen in the screenshot below, this happened in the other footprint. Anyway, attached here both footprints ( the Transformer_EC40_16Pin_5.08_35.56_Horizontal.kicad_mod and Bornier.V2_P3_5.08.kicad_mod ). Both from different pretty folder.
Regarding the steps, as I said previously, it happened occasionally. Usually, mostly, this case didnt happened. The steps as shown in following screenshot.
1). I have temporal library folder, said : d:/github/jbd-kicadlib/modules/packages3d/terminal_blocks for my experiment the 3d models, before it copied to the Kicad default library ( said : C:\Program X\KiCad\share\kicad\modules\packages3d ).
This means that the 3d model doesnt exist yet in default library folder.
2). To make suit to the default path, the I did edit the filename by remove the temporal folder path as shown in s/c 2 and 3.
Klik OK as usual. No problem up to this point.
3). Next, just to make sure, I did view 3d by klik 3D Viewer ..... and occasionally, not always, not repeatable , the Kicad goes crashing.
Well,
This' happenned not only in one footprint. As could be seen in the screenshot below, this happened in the other footprint. Anyway, attached here both footprints ( the Transformer_ EC40_16Pin_ 5.08_35. 56_Horizontal. kicad_mod and Bornier. V2_P3_5. 08.kicad_ mod ). Both from different pretty folder.
Regarding the steps, as I said previously, it happened occasionally. Usually, mostly, this case didnt happened. The steps as shown in following screenshot. jbd-kicadlib/ modules/ packages3d/ terminal_ blocks for my experiment the 3d models, before it copied to the Kicad default library ( said : C:\Program X\KiCad\ share\kicad\ modules\ packages3d ).
1). I have temporal library folder, said : d:/github/
This means that the 3d model doesnt exist yet in default library folder.
2). To make suit to the default path, the I did edit the filename by remove the temporal folder path as shown in s/c 2 and 3.
Klik OK as usual. No problem up to this point.
3). Next, just to make sure, I did view 3d by klik 3D Viewer ..... and occasionally, not always, not repeatable , the Kicad goes crashing.
Thanks.
// FOOTPRINT LISTS
//1 : Transformer_ EC40_16Pin_ 5.08_35. 56_Horizontal. kicad_mod EC40_16Pin_ 5.08_35. 56_Horizontal (layer F.Cu) (tedit 5620F168) EC40_16Pin_ 5.08_35. 56_Horizontal. jpg) transformer- 16pin,ec40- 16pin) EC40_16Pin_ 5.08_35. 56_Horizontal (at 17.78 7.62) (layer F.Fab) Devices. 3dshapes/ Transformer_ EC40_16Pin_ 5.08_35. 56_Horizontal. wrl
//
(module Transformer_
(descr Transformer_
(tags transformer,
(fp_text reference REF** (at 17.78 -42.545) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Transformer_
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.302 -41.402) (end 38.862 -41.402) (layer F.CrtYd) (width 0.05))
(fp_line (start 38.862 -41.402) (end 38.862 5.842) (layer F.CrtYd) (width 0.05))
(fp_line (start 38.862 5.842) (end -3.302 5.7658) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.302 5.7658) (end -3.302 -41.402) (layer F.CrtYd) (width 0.05))
(fp_text user 16 (at 0 -39.37) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user 9 (at 35.56 -39.37) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user 8 (at 35.56 3.81) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user 1 (at 0 3.81) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 10.16 -16.51) (end 25.4 -16.51) (layer F.SilkS) (width 0.15))
(fp_line (start 10.16 -19.05) (end 25.4 -19.05) (layer F.SilkS) (width 0.15))
(fp_arc (start 22.86 -22.86) (end 25.4 -22.86) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 22.86 -22.86) (end 22.86 -20.32) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 17.78 -22.86) (end 20.32 -22.86) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 17.78 -22.86) (end 17.78 -20.32) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 12.7 -22.86) (end 15.24 -22.86) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 12.7 -22.86) (end 12.7 -20.32) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 22.86 -12.7) (end 22.86 -15.24) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 22.86 -12.7) (end 20.32 -12.7) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 17.78 -12.7) (end 17.78 -15.24) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 17.78 -12.7) (end 15.24 -12.7) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 12.7 -12.7) (end 12.7 -15.24) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 12.7 -12.7) (end 10.16 -12.7) (angle 90) (layer F.SilkS) (width 0.15))
(fp_line (start 25.4 -12.7) (end 27.94 -12.7) (layer F.SilkS) (width 0.15))
(fp_line (start 7.62 -12.7) (end 10.16 -12.7) (layer F.SilkS) (width 0.15))
(fp_line (start 25.4 -22.86) (end 27.94 -22.86) (layer F.SilkS) (width 0.15))
(fp_line (start 7.62 -22.86) (end 10.16 -22.86) (layer F.SilkS) (width 0.15))
(fp_line (start 10.16 -17.78) (end 25.4 -17.78) (layer F.SilkS) (width 0.15))
(fp_line (start 38.1 -33.02) (end -2.54 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 33.02 -38.1) (end 38.1 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 38.1 -38.1) (end 38.1 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 27.94 -38.1) (end 33.02 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 33.02 -38.1) (end 33.02 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 22.86 -38.1) (end 27.94 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 27.94 -38.1) (end 27.94 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 17.78 -38.1) (end 22.86 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 22.86 -38.1) (end 22.86 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 12.7 -38.1) (end 17.78 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 17.78 -38.1) (end 17.78 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 7.62 -38.1) (end 12.7 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 12.7 -38.1) (end 12.7 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start 2.54 -38.1) (end 7.62 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 7.62 -38.1) (end 7.62 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 -33.02) (end -2.54 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 -38.1) (end 2.54 -38.1) (layer F.SilkS) (width 0.15))
(fp_line (start 2.54 -38.1) (end 2.54 -33.02) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 -2.54) (end 38.1 -2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 38.1 2.54) (end 38.1 -2.54) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 2.54) (end -2.54 -2.54) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 2.54) (end 38.1 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 33.02 -2.54) (end 33.02 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 27.94 -2.54) (end 27.94 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 22.86 -2.54) (end 22.86 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 17.78 -2.54) (end 17.78 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 12.7 -2.54) (end 12.7 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 7.62 -2.54) (end 7.62 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start 2.54 -2.54) (end 2.54 2.54) (layer F.SilkS) (width 0.15))
(fp_line (start -3.175 5.715) (end -3.175 -41.275) (layer F.SilkS) (width 0.15))
(fp_line (start -3.175 -41.275) (end 38.735 -41.275) (layer F.SilkS) (width 0.15))
(fp_line (start 38.735 -41.275) (end 38.735 5.715) (layer F.SilkS) (width 0.15))
(fp_line (start 38.735 5.715) (end -3.175 5.715) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at 0 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 5.08 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 10.16 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 15.24 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 20.32 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 25.4 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole circle (at 30.48 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole circle (at 35.56 0) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole circle (at 35.56 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole circle (at 30.48 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 11 thru_hole circle (at 25.4 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 12 thru_hole circle (at 20.32 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 13 thru_hole circle (at 15.24 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 14 thru_hole circle (at 10.16 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 15 thru_hole circle (at 5.08 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(pad 16 thru_hole circle (at 0 -35.56) (size 2.6 2.6) (drill 1.4) (layers *.Cu *.Mask F.SilkS))
(model Magnetic_
(at (xyz 0.7 0.7 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
// 2 : Bornier. V2_P3_5. 08.kicad_ mod Blocks: Bornier. V2_P3_5. 08.jpg) JBD-KICADLIB/ modules/ packages3d/ Terminal_ Blocks. 3dshapes/ Bornier. V2_P3_5. 08.wrl
//
(module Bornier.V2_P3_5.08 (layer F.Cu) (tedit 5621B4D9)
(descr Terminal_
(tags "bornier, bornier v2, bornier v3 3pins")
(fp_text reference REF** (at 5.08 -6.223) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.1)))
)
(fp_text value Bornier.V2_P3_5.08 (at 4.953 6.477) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.54 -5.08) (end -2.54 4.953) (layer F.SilkS) (width 0.15))
(fp_line (start 12.7 -5.08) (end 12.7 4.953) (layer F.SilkS) (width 0.15))
(fp_line (start 12.827 -5.207) (end 12.827 5.08) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.667 -5.207) (end -2.667 5.08) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.667 5.08) (end 12.827 5.08) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.667 -5.207) (end 12.827 -5.207) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.54 -5.08) (end 12.7 -5.08) (layer F.SilkS) (width 0.15))
(fp_line (start -2.54 4.953) (end 12.7 4.953) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole rect (at 0 0) (size 2.54 2.54) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 5.08 0) (size 2.54 2.54) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 10.16 0) (size 2.54 2.54) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(model D:/GITHUB/
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)