Well, I want to "get ride off" the following things with this patch
1. The necessary to edit components when adding them
which will for sure introduce errors in larger construction when you forget to edit the component correctly
2. Get a very easy process to generate BOM's with as little "hands on" as possibly.
3. Don’t have to redo 1 and 2 for each new construction
Note:
The idea of this patch is to have the possibility to have the same id in several libraries,
The process described below is just one way of utilize the possibility to have the same id in different libraries
the patch is not "locked" to this described process.
This patch is backward compatible, you can still have only one "capacitor" and edit the values each time you add the capacitor to a scheme.
-- The below described process is just an example that is impossible today but will work with patch --
The point with have several different libraries, such as
Capacitor_ceramic_100V_2012_5%
Capacitor_ceramic_100V_2012_10%
Capacitor_ceramic_50V_2012_20%
Is that you create these libraries one time, with all needed information in them, such as
right footprint, voltage demand, tolerances and even perhaps the manufacture and the supplier with right component number etc.
Already when you choose the capacitor you can, as in my example, all needed information is there.
It even get better when you generate a BOM, you get all the right information automatically.
Stefan Olsson
<email address hidden>
Mobile +46704108386
-----Original Message-----
From: <email address hidden> [mailto:<email address hidden>] On Behalf Of Novak Tamas
Sent: den 14 september 2015 00:23
To: Stefan Olsson
Subject: [Bug 1493071] Re: KiCad does not track wich library components are imported from
Stefan , I think that better practice is having a single "C" and a "Cpol" in device.lib, where Value is simply "C".
When you place the component, you may edit its properties with "E" key.
Set Value from "C" to "1nF", set Footprint by "Assign footprint", and "Add field" only if needed (e.g. "Voltage"= "50V").
Or simply set Value to all important things like "1n/50V/X7R/SMD1206".
No reason to make separate components for each capacitors (e.g.
1uF_100V_2012_5%).
Title:
KiCad does not track wich library components are imported from
Status in KiCad:
New
Bug description:
Dear sir or Madame
If i create a capacitor with the same Value in several libraries kicad always select the same capacitor regardless of choice
Platform: windows 7, build 7601, 64 bit
Kicad: kicad-product-r6055.fa29c62-x86_64.exe
Release build wxWidget version 3.0.2
Boost version 1.57.0
I have the libraries
capacitor_ceramic_16V_1608.lib
capacitor_ceramic_50V_1608.lib
capacitor_ceramic_100V_1608.lib
capacitor_ceramic_200V_2012.lib
and create a capacitor in each of them with the Value "1nF" (and the two visibly extra fields "voltage" and "package")
each 1nF extra field ("voltage" and "package") differes depedning on which library they are created in.
When I in the schematic editor press "Place component" and write 1nF I can see the 1nF capacitor in each of the libraries.
However, regardless of which 1nF capacitor I choose, kicad will always choose the capacitor from the same library
(in my case the 16V_1608.lib)
I can detect this by the voltage and package (in my specific case) kicad is always choosing "1nF,16V,1608" even if I choose
"1nF,200V,2012"
PS
I have attached the project , try to add "1nF with 200V and formfactor 2012 to the line.sch, it wont work for me
DS
Hi
Well, I want to "get ride off" the following things with this patch
1. The necessary to edit components when adding them
which will for sure introduce errors in larger construction when you forget to edit the component correctly
2. Get a very easy process to generate BOM's with as little "hands on" as possibly.
3. Don’t have to redo 1 and 2 for each new construction
Note:
The idea of this patch is to have the possibility to have the same id in several libraries,
The process described below is just one way of utilize the possibility to have the same id in different libraries
the patch is not "locked" to this described process.
This patch is backward compatible, you can still have only one "capacitor" and edit the values each time you add the capacitor to a scheme.
-- The below described process is just an example that is impossible today but will work with patch --
The point with have several different libraries, such as ceramic_ 100V_2012_ 5% ceramic_ 100V_2012_ 10% ceramic_ 50V_2012_ 20%
Capacitor_
Capacitor_
Capacitor_
Is that you create these libraries one time, with all needed information in them, such as
right footprint, voltage demand, tolerances and even perhaps the manufacture and the supplier with right component number etc.
Already when you choose the capacitor you can, as in my example, all needed information is there.
It even get better when you generate a BOM, you get all the right information automatically.
Stefan Olsson
<email address hidden>
Mobile +46704108386
-----Original Message-----
From: <email address hidden> [mailto:<email address hidden>] On Behalf Of Novak Tamas
Sent: den 14 september 2015 00:23
To: Stefan Olsson
Subject: [Bug 1493071] Re: KiCad does not track wich library components are imported from
Stefan , I think that better practice is having a single "C" and a "Cpol" in device.lib, where Value is simply "C". X7R/SMD1206" .
When you place the component, you may edit its properties with "E" key.
Set Value from "C" to "1nF", set Footprint by "Assign footprint", and "Add field" only if needed (e.g. "Voltage"= "50V").
Or simply set Value to all important things like "1n/50V/
No reason to make separate components for each capacitors (e.g.
1uF_100V_2012_5%).
-- /bugs.launchpad .net/bugs/ 1493071
You received this bug notification because you are subscribed to the bug report.
https:/
Title:
KiCad does not track wich library components are imported from
Status in KiCad:
New
Bug description:
Dear sir or Madame
If i create a capacitor with the same Value in several libraries kicad always select the same capacitor regardless of choice
Platform: windows 7, build 7601, 64 bit r6055.fa29c62- x86_64. exe
Kicad: kicad-product-
Release build wxWidget version 3.0.2
Boost version 1.57.0
I have the libraries ceramic_ 16V_1608. lib ceramic_ 50V_1608. lib ceramic_ 100V_1608. lib ceramic_ 200V_2012. lib
capacitor_
capacitor_
capacitor_
capacitor_
and create a capacitor in each of them with the Value "1nF" (and the two visibly extra fields "voltage" and "package")
each 1nF extra field ("voltage" and "package") differes depedning on which library they are created in.
When I in the schematic editor press "Place component" and write 1nF I can see the 1nF capacitor in each of the libraries.
However, regardless of which 1nF capacitor I choose, kicad will always choose the capacitor from the same library
(in my case the 16V_1608.lib)
I can detect this by the voltage and package (in my specific case) kicad is always choosing "1nF,16V,1608" even if I choose
"1nF,200V,2012"
PS
I have attached the project , try to add "1nF with 200V and formfactor 2012 to the line.sch, it wont work for me
DS
Regards
/Stefan
To manage notifications about this bug go to: /bugs.launchpad .net/kicad/ +bug/1493071/ +subscriptions
https:/