jammy/linux-raspi: 5.15.0-1004.4 -proposed tracker

[Juerg Haefliger]

This bug will contain status and test results related to a kernel source (or snap) as stated in the title.

For an explanation of the tasks and the associated workflow see:
  https://wiki.ubuntu.com/Kernel/kernel-sru-workflow

-- swm properties --
boot-testing-requested: true
built:
  from: f6e5e11ba5f6f14f
  route-entry: 1
delta:
  promote-to-proposed:
  - meta
  - main
  promote-to-release:
  - main
  - meta
  sru-review:
  - meta
  - main
kernel-stable-master-bug: 1964573
packages:
  main: linux-raspi
  meta: linux-meta-raspi
phase: Complete
phase-changed: Friday, 01. April 2022 15:40 UTC
proposed-announcement-sent: true
proposed-testing-requested: true
reason: {}
synthetic:
  :promote-to-as-proposed: Fix Released
trackers:
  jammy/linux-raspi/pi-kernel: bug 1965282
variant: debs
versions:
  main: 5.15.0-1004.4
  meta: 5.15.0.1004.4
~~:
  clamps:
    promote-to-proposed: f6e5e11ba5f6f14f
    self: 5.15.0-1004.4
    sru-review: f6e5e11ba5f6f14f

[Juerg Haefliger (juergh)]

RT on raspi is flaky, make it pass manually.

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-raspi - 5.15.0-1004.4

---------------
linux-raspi (5.15.0-1004.4) jammy; urgency=medium

  * jammy/linux-raspi: 5.15.0-1004.4 -proposed tracker (LP: #1965283)

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-16)
    (LP: #1965308)
    - ARM: dts: bcm2711-rpi-ds: Disable the BCM2835 STC
    - Revert "drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure
      DSI host"
    - Revert "drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init
      order"
    - drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
    - drm/panel: Add prepare_upstream_first flag to drm_panel
    - drm: Include drm_connector.h from drm_panel.h
    - drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08)
    (LP: #1964144)
    - drm/vc4: hdmi: Make sure the device is powered with CEC
    - overlays: rpi-poe(-plus): Fix parameters
    - dtoverlays: fix overrides in vc4-kms-dpi-generic
    - dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic
    - media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
    - drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
    - dtoverlays: Add additional mappings to vc4-kms-dpi-generic
    - drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order
    - drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
    - drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
    - drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure DSI
      host
    - drm/vc4: Rename bridge to out_bridge
    - drm/vc4: Move DSI initialisation to encoder_mode_set.
    - drm/vc4: Remove splitting the bridge chain from the driver.
    - drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
    - drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
    - drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
    - usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
    - dtoverlays: Correct link frequency for ov7251
    - media: i2c: Add acpi support to ov7251
    - media: i2c: Provide ov7251_check_hwcfg()
    - media: i2c: Add ov7251_pll_configure()
    - media: i2c: Add support for 19.2MHz clock to ov7251
    - media: i2c: Add ov7251_detect_chip()
    - media: i2c: Add pm_runtime support to ov7251
    - media: i2c: Remove .s_power() from ov7251
    - media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
    - media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed
    - media: i2c: ov7251: V4L2_CID_LINK_FREQUENCY is fixed
    - media: i2c: ov7251: Initialise current_mode during probe
    - media: i2c: ov7251: Add V4L2_CID_HBLANK control
    - media: i2c: ov7251: Do not reset gain on mode change
    - media: i2c: ov7251: Fix link_freq validation loop
    - media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS,
      CROP_DEFAULT
    - media: i2c: ov7251: Set VTS instead of having full tables for FPS.
    - media: i2c: ov7251: Limit exposure based o...

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

All tasks have been completed and the bug is being set to Fix Released