As per understanding, node cleaning should fall back to dd if the the _ata_erase fails.
| maintenance_reason | Agent returned error for clean step {u'priority': 10, u'interface': | | | u'deploy', u'step': u'erase_devices', u'abortable': True, | | | u'reboot_requested': False} on node e3143045-09cf-4892-a699-1e26884e54ae | | | : {u'message': u'Clean step failed: Error performing clean_step | | | erase_devices: Error erasing block device: Block device /dev/sda is | | | frozen and cannot be erased', u'code': 500, u'type': u'CleaningError', | | | u'details': u'Error performing clean_step erase_devices: Error erasing | | | block device: Block device /dev/sda is frozen and cannot be erased'}. | | provision_state | clean failed
stack@test-blade:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media Model Number: XR0480GEBLV Serial Number: 14120D0FA6F5 Firmware Revision: HPS4 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 Standards: Used: unknown (minor revision code 0x0028) Supported: 9 8 7 6 5 Likely used: 9 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 937703088 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 457862 MBytes device size with M = 1000*1000: 480103 MBytes (480 GB) cache/buffer size = unknown Form Factor: less than 1.8 inch Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set Write cache * Look-ahead DEVICE_RESET command * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Gen3 signaling speed (6.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters * Device automatic Partial to Slumber transitions * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT * DMA Setup Auto-Activate optimization Device-initiated interface power management Asynchronous notification (eg. media change) * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Write Same (AC2) * SCT Features Control (AC4) * SCT Data Tables (AC5) * reserved 69[4] * Data Set Management TRIM supported (limit 8 blocks) * Deterministic read ZEROs after TRIM Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 500a07510d0fa6f5 NAA : 5 IEEE OUI : 00a075 Unique ID : 10d0fa6f5 Checksum: correct
As per understanding, node cleaning should fall back to dd if the the _ata_erase fails.
| maintenance_reason | Agent returned error for clean step {u'priority': 10, u'interface': | requested' : False} on node e3143045- 09cf-4892- a699-1e26884e54 ae |
| | u'deploy', u'step': u'erase_devices', u'abortable': True, |
| | u'reboot_
| | : {u'message': u'Clean step failed: Error performing clean_step |
| | erase_devices: Error erasing block device: Block device /dev/sda is |
| | frozen and cannot be erased', u'code': 500, u'type': u'CleaningError', |
| | u'details': u'Error performing clean_step erase_devices: Error erasing |
| | block device: Block device /dev/sda is frozen and cannot be erased'}. |
| provision_state | clean failed
stack@test-blade:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
sectors/ track 63 63
cache/ buffer size = unknown
Security Mode feature set
Write cache
DEVICE_ RESET command ABLE_EXT command _DMA_EXT_ GPL commands
Device- initiated interface power management
Asynchronous notification (eg. media change)
supported
frozen
supported: enhanced erase
Model Number: XR0480GEBLV
Serial Number: 14120D0FA6F5
Firmware Revision: HPS4
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0028)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 937703088
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 457862 MBytes
device size with M = 1000*1000: 480103 MBytes (480 GB)
Form Factor: less than 1.8 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
* Power Management feature set
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECT
* {READ,WRITE}
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* Device automatic Partial to Slumber transitions
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* reserved 69[4]
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
not enabled
not locked
not expired: security count
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 500a07510d0fa6f5
NAA : 5
IEEE OUI : 00a075
Unique ID : 10d0fa6f5
Checksum: correct