THe dxf exporter places extra lines in the corners with the lastest version, when imported into Sheetcam. This did not happen in .48.4-1

[arclightdynamics]

process a DXF files and then open it in sheetcam and you will see extra lines in corners. This did not happen in previous versions. So I'm stuck using version .48.4-1

If you have questions please email me at <email address hidden>

[su_v (suv-lp)]

Please add information about OS/platform and tested Inkscape versions to the bug description, thank you.

To allow further investigation of the reported issue, please attach a test case to the bug report (original Inkscape SVG file, exported DXF files with different Inkscape versions) and add details about the DXF export settings used in Inkscape.

[scott cunningham (scottc-j)]

Here is the original SVG of the sign I used to create the two DXF files

[scott cunningham (scottc-j)]

Export setting for both the DXF files is:
Base units IN
latin 1 encoding,
use lwpolyline

[su_v (suv-lp)]

Please add information about OS/platform to the bug description, thank you.

[su_v (suv-lp)]

On OS X 10.7.5, with same export settings (otherwise default prefs):
- not reproduced with Inkscape 0.48.4
- reproduced with Inkscape 0.48.5, Inkscape 0.91
- not reproduced with Inkscape 0.91+devel r14313

Regression seems fixed in current trunk - the underlying issue is likely already tracked in older report.

--
replaces incomplete earlier comment #7 (now hidden)

[su_v (suv-lp)]

DXF export with latest trunk (Inkscape 0.91+devel r14313) attached.

[Alvin Penner (apenner)]

yes, this appears to be a duplicate of Bug 1429184, which was fixed in rev 13980

- could you re-test with a recent version of the code? You will need to download the two files dxf_outlines.py and dxf_outlines.inx from the site:
http://bazaar.launchpad.net/~inkscape.dev/inkscape/trunk/files/head:/share/extensions/

and place them in the directory Inkscape\share\extensions\.

[scott cunningham (scottc-j)]

Is that bug fix not included in the most recent windows installer?

Best RegardsScott Cunningham, CEO
Arclight Dynamics
A division of Cascade Steel Works LLC.

866-222-2154
20652 SE Carmen Loop Rd
Bend OR 97702

---- On Fri, 21 Aug 2015 05:48:49 -0700 Alvin Penner&lt;<email address hidden>&gt; wrote ----

yes, this appears to be a duplicate of Bug 1429184, which was fixed in
rev 13980

- could you re-test with a recent version of the code? You will need to download the two files dxf_outlines.py and dxf_outlines.inx from the site:
http://bazaar.launchpad.net/~inkscape.dev/inkscape/trunk/files/head:/share/extensions/

and place them in the directory Inkscape\share\extensions\.

--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1485279

Title:
 THe dxf exporter places extra lines in the corners with the lastest
 version, when imported into Sheetcam. This did not happen in .48.4-1

Status in Inkscape:
 Incomplete

Bug description:
 process a DXF files and then open it in sheetcam and you will see
 extra lines in corners. This did not happen in previous versions. So
 I'm stuck using version .48.4-1

 If you have questions please email me at <email address hidden>

To manage notifications about this bug go to:
https://bugs.launchpad.net/inkscape/+bug/1485279/+subscriptions

[Alvin Penner (apenner)]

- this particular fix is not in Inkscape 0.91 r13725 (Jan 30 2015)

[scott cunningham (scottc-j)]

Is there a way to get it in there?

Best RegardsScott Cunningham, CEO
Arclight Dynamics
A division of Cascade Steel Works LLC.

866-222-2154
20652 SE Carmen Loop Rd
Bend OR 97702

---- On Fri, 21 Aug 2015 14:34:53 -0700 Alvin Penner &lt;<email address hidden>&gt; wrote ----

- this particular fix is not in Inkscape 0.91 r13725 (Jan 30 2015)

--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1485279

Title:
 THe dxf exporter places extra lines in the corners with the lastest
 version, when imported into Sheetcam. This did not happen in .48.4-1

Status in Inkscape:
 Incomplete

Bug description:
 process a DXF files and then open it in sheetcam and you will see
 extra lines in corners. This did not happen in previous versions. So
 I'm stuck using version .48.4-1

 If you have questions please email me at <email address hidden>

To manage notifications about this bug go to:
https://bugs.launchpad.net/inkscape/+bug/1485279/+subscriptions

[Alvin Penner (apenner)]

as mentioned previously, in comment 10, you can try this code out just by downloading it directly from the website. This is Python code, so it runs all by itself, without any need to re-compile Inkscape. Just replace your current py and inx file with the new files and give it a try.