Boot/Serial test: The board comes up and the serial console is responsive. Memory usage is hard to verify due to the kernel boot arguments.
Con Test: VGA input is unavailable on the board. HDMI cannot be verified in my current setup as the board only interfaces with an HDMI monitor.
On the flip side /dev/fb0 is created and the av8100 seems happy from the console ouput:
'[20.785705] av8100_hdmi av8100_hdmi.2: Framebuffer created (av8100_hdmi)'
USB is not responsive and the 5V power is not routed to the USB device. My configuration is using a powered hub.
Network test: Surprisingly enough 'eth0' doesn't come up. This should be investigated.
After performing the tests found here: https:/ /wiki.linaro. org/Platform/ QA/TestCases/ Nano
The following can be reported:
Boot/Serial test: The board comes up and the serial console is responsive. Memory usage is hard to verify due to the kernel boot arguments.
Con Test: VGA input is unavailable on the board. HDMI cannot be verified in my current setup as the board only interfaces with an HDMI monitor.
On the flip side /dev/fb0 is created and the av8100 seems happy from the console ouput:
'[20.785705] av8100_hdmi av8100_hdmi.2: Framebuffer created (av8100_hdmi)'
USB is not responsive and the 5V power is not routed to the USB device. My configuration is using a powered hub.
Network test: Surprisingly enough 'eth0' doesn't come up. This should be investigated.