Comment 0 for bug 1980371

[Impact]
Need to enable Aquantia NIC [1d6a:14c0] for an IoT project.

[Fix]
This series of patch in v5.8 enable the NIC
https://patchwork<email address hidden>/

[Test]
We don't have 10GbE equipment to measure the speed, but it reaches around 1Gb/s in my test environment.

$ iperf3 -c 10.102.88.47
Connecting to host 10.102.88.47, port 5201
[ 5] local 10.102.80.195 port 53346 connected to 10.102.88.47 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 115 MBytes 966 Mbits/sec 39 293 KBytes
[ 5] 1.00-2.00 sec 111 MBytes 933 Mbits/sec 26 291 KBytes
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec 26 291 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 944 Mbits/sec 26 291 KBytes
[ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec 26 288 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 26 291 KBytes
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec 26 293 KBytes
[ 5] 7.00-8.00 sec 111 MBytes 933 Mbits/sec 26 293 KBytes
[ 5] 8.00-9.00 sec 112 MBytes 944 Mbits/sec 26 290 KBytes
[ 5] 9.00-10.00 sec 111 MBytes 933 Mbits/sec 26 291 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec 273 sender
[ 5] 0.00-10.00 sec 1.09 GBytes 937 Mbits/sec receiver

[Where problems could occur]