Every print causes the printer to pause at first page on a Deskjet F2280

Bug #453773 reported by dyle
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
HPLIP
New
Undecided
Unassigned

Bug Description

I have a Deskjet F2280 installed and using CUPS 1.4.1. I was not able to pick a PPD file from the hp-setup utility but within the CUPS interface I was presented with the "HP Deskjet F2200 series" which rather close matches my printer.

Printing is ok, but for the very first page.

No matter what I print: right in the middle of the first page the printer aborts printing and sets itself to "Paused". I then manually have to click "Resume Printer" in CUPS and this feeds the paper (with some printing on it) and I have to restart the whole printing process again.

This is pretty annoying for a set of reasons:
1. I have to start up the CUPS interface every time I want to print something
2. The aborted print causes a waste of paper which is avoidable
3. One needs to be root to "Resume Printer" and as such noone except me can print.

The last one is a killer, since there *are* non-root users on the machine.

What further info is needed and what can I do?

Thx, in advance,
Oliver

Tags: f2280
Revision history for this message
dyle (oliver-maurhart) wrote :
description: updated
Revision history for this message
Suma Byrappa (suma-byrappa) wrote :

Hello!

Thanks for posting hp-check output. Looking at few error and warning messages in output log, I would like to verify if HPLIP components are actually in use. Can you please send me CUPS log file located at /var/log/cups/error_log (after log level is set to debug and the problem is reproduced once)?

The instructions for getting the CUPS debug log is available at

http://hplipopensource.com/node/225

Thanks,
Suma

Revision history for this message
dyle (oliver-maurhart) wrote :

Hi,

Ok.

# /etc/init.d/cups stop
# rm /var/log/cups/*
# grep LogLevel /etc/cups/cupsd.conf
LogLevel debug
# /etc/init.d/cups start

Attached is the error.log and access.log in a tarball (error.log exeecd 100K!).

Thx for help!

Revision history for this message
Suma Byrappa (suma-byrappa) wrote :

Hi,

Thanks for posting the log files.

Can you try adding the user "dyle" - which is the user trying to print as seen in the log files - to "lp" or "lpadmin" group and see if that helps?

Do you see any warning messages (or light) on printer when it pauses printing?

Regards,
Suma

Revision history for this message
Suma Byrappa (suma-byrappa) wrote :

Hi,

Please post /var/log/syslog too (ensure problem is reproduced once).

Thanks,
Suma

Revision history for this message
dyle (oliver-maurhart) wrote :
Download full text (3.7 KiB)

Ok. Here is the relevant output:

# grep dyle /etc/group | grep lp
lp:x:7:lp,dyle,jasa,janos,zala
lpadmin:x:106:root,dyle

So the user is listened in the groups.

And the syslog for a printing page reads:

Nov 2 07:22:48 semirhage kernel: [ 624.792716] usb usb8: usb auto-resume
Nov 2 07:22:48 semirhage kernel: [ 624.792722] usb usb8: wakeup_rh
Nov 2 07:22:48 semirhage kernel: [ 624.824024] hub 8-0:1.0: hub_resume
Nov 2 07:22:48 semirhage kernel: [ 624.824049] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
Nov 2 07:22:48 semirhage kernel: [ 624.824249] usb usb5: usb auto-resume
Nov 2 07:22:48 semirhage kernel: [ 624.824252] usb usb5: wakeup_rh
Nov 2 07:22:48 semirhage kernel: [ 624.856012] hub 5-0:1.0: hub_resume
Nov 2 07:22:48 semirhage kernel: [ 624.856031] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
Nov 2 07:22:48 semirhage kernel: [ 624.856087] usb usb4: usb auto-resume
Nov 2 07:22:48 semirhage kernel: [ 624.856090] usb usb4: wakeup_rh
Nov 2 07:22:48 semirhage kernel: [ 624.888014] hub 4-0:1.0: hub_resume
Nov 2 07:22:48 semirhage kernel: [ 624.888033] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
Nov 2 07:22:48 semirhage kernel: [ 624.888181] usb usb1: usb auto-resume
Nov 2 07:22:48 semirhage kernel: [ 624.888185] ehci_hcd 0000:00:1a.7: resume root hub
Nov 2 07:22:48 semirhage kernel: [ 624.929013] hub 1-0:1.0: hub_resume
Nov 2 07:22:48 semirhage kernel: [ 624.929036] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
Nov 2 07:22:48 semirhage kernel: [ 624.933958] usblp 6-1:1.1: disconnect by usbfs
Nov 2 07:22:48 semirhage kernel: [ 624.933978] drivers/usb/core/file.c: removing 0 minor
Nov 2 07:22:48 semirhage kernel: [ 624.933983] PM: Removing info for No Bus:lp0
Nov 2 07:22:48 semirhage kernel: [ 624.934058] usblp0: removed
Nov 2 07:22:48 semirhage HP_Deskjet_F2200: prnt/hpijs/hpcups.cpp 331: WARNING: color pen has low ink
Nov 2 07:22:48 semirhage HP_Deskjet_F2200: prnt/hpijs/hpcups.cpp 350: STATE: +marker-supply-low-warning
Nov 2 07:22:48 semirhage hal_lpadmin: Running hal_lpadmin
Nov 2 07:22:49 semirhage kernel: [ 625.954043] usb usb8: suspend_rh (auto-stop)
Nov 2 07:22:49 semirhage kernel: [ 625.954063] usb usb5: suspend_rh (auto-stop)
Nov 2 07:22:49 semirhage kernel: [ 625.954082] usb usb4: suspend_rh (auto-stop)
Nov 2 07:22:49 semirhage hal_lpadmin: hal_lpadmin triggered by usblp kernel module
Nov 2 07:22:49 semirhage hal_lpadmin: Using device ID from HAL database entry
Nov 2 07:22:49 semirhage hal_lpadmin: remove
Nov 2 07:22:49 semirhage hal_lpadmin: Found configured printer: HP_Deskjet_F2200
Nov 2 07:22:49 semirhage hal_lpadmin: Disabled printer HP_Deskjet_F2200, as the corresponding device was unplugged or turned off
Nov 2 07:22:50 semirhage kernel: [ 627.704038] hub 8-0:1.0: hub_suspend
Nov 2 07:22:50 semirhage kernel: [ 627.704048] usb usb8: bus auto-suspend
Nov 2 07:22:50 semirhage kernel: [ 627.704051] usb usb8: suspend_rh
Nov 2 07:22:50 semirhage kernel: [ 627.704067] hub 5-0:1.0: hub_suspend
Nov 2 07:22:50 semirhage kernel: [ 627.704071] usb usb5: bus auto-suspend
Nov 2 07:22:50 semirhage kernel: [ 627.704073] usb usb5: suspend_rh
Nov 2 07:22:50 semirhage ke...

Read more...

Revision history for this message
dyle (oliver-maurhart) wrote :

For the record:

# lsusb
Bus 002 Device 004: ID 04fc:0c15 Sunplus Technology Co., Ltd
Bus 002 Device 005: ID 04fc:0c15 Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 03f0:2404 Hewlett-Packard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 044f:d001 ThrustMaster, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

To get clear in Who-is-Who on my USB.

Revision history for this message
dyle (oliver-maurhart) wrote :

Just for Info:

I kicked the bogus cups-halutils-0.6.19 and everything is fine ...

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.