Yes Thanks the problem was resolved. It just took a little more digging on the net . and did reinstall via HPlLIP found on the net. Result: HPLIP toolbox which contained "Install required plugin" and that got things rolling,ie called for a couple of more steps including reboot.
Have not yet been able to make wireless available. USB is the only mode.
Just tested again before reply and after shutdown and restart.
I've been down this path before with this printer. It was one of the ones that masqueraded as a CD and had to use
#!/bin/bash
Subsequently, in the directory where the file is, just do in a terminal:
$ chmod +x hplip_usb_modeswitch.sh
to make the file executable. Now double-cliking on the file should do the job - you should have the option `Run in terminal' once you do so. Once you run it, you will need to disconnect the printer, turn it off, wait for 10 sec (power cycle), and turn it back on and connect, and it should be ready to roll!
to make it come alive
A tool I kept in reserve.
The tools available are not intuitive for me perhaps I'll remember now and trust HPLIP. after the masquerade problem I didn't trust HPLIP any more; It had gone completely out of favour with me and perhaps other folks as well.
Yes Thanks the problem was resolved. It just took a little more digging on the net . and did reinstall via HPlLIP found on the net. Result: HPLIP toolbox which contained "Install required plugin" and that got things rolling,ie called for a couple of more steps including reboot.
Have not yet been able to make wireless available. USB is the only mode.
Just tested again before reply and after shutdown and restart.
I've been down this path before with this printer. It was one of the ones that masqueraded as a CD and had to use
#!/bin/bash
usb_modeswitch -v 0x03f0 -p 0x032a -M 505554202F64657 62F666561747572 655374617475732 E786D6C20485454 502F312E310D0A4 34F4E54454E542D 4C454E4754483A2 03232320D0A5553 45522D4147454E5 43A68702050726F 78792F332E300D0 A484F53543A6C6F 63616C686F73743 A333931300D0A0D 0A3C3F786D6C207 6657273696F6E3D 22312E302220656 E636F64696E673D 225554462D38223 F3E0D0A3C666561 747572655374617 4757320786D6C6E 733A7873693D226 87474703A2F2F77 77772E77332E6F7 2672F323030312F 584D4C536368656 D612D696E737461 6E6365222078736 93A6E6F4E616D65 737061636553636 8656D614C6F6361 74696F6E3D22666 561747572655374 617475732E78736 4223E0D0A20203C 736D617274496E7 374616C6C3E6469 7361626C65643C2 F736D617274496E 7374616C6C3E0D0 A3C2F6665617475 726553746174757 33E0D0A0D0A -n -2 474554202F64657 62F666561747572 655374617475732 E786D6C20485454 502F312E310D0A4 34F4E54454E542D 4C454E4754483A2 0300D0A55534552 2D4147454E543A6 8702050726F7879 2F332E300D0A484 F53543A6C6F6361 6C686F73743A333 931300D0A0D0A -n -R
and then name the file 'hplip_ usb_modeswitch. sh'
Subsequently, in the directory where the file is, just do in a terminal:
$ chmod +x hplip_usb_ modeswitch. sh
to make the file executable. Now double-cliking on the file should do the job - you should have the option `Run in terminal' once you do so. Once you run it, you will need to disconnect the printer, turn it off, wait for 10 sec (power cycle), and turn it back on and connect, and it should be ready to roll!
to make it come alive
A tool I kept in reserve.
The tools available are not intuitive for me perhaps I'll remember now and trust HPLIP. after the masquerade problem I didn't trust HPLIP any more; It had gone completely out of favour with me and perhaps other folks as well.
Thank You Till Kamppeter!
Case/bug closed