I have disabled all the workarounds I had previously set
- re-enabling ANI
- re-enabling power management
- re-enabling hwcrypt
- BSSID not set manually in Network Manager
I can confirm that the bug exists (tested this morning)
- in the standard Ubuntu kernel (3.8.0-23-generic)
- in the latest upstream kernel (3.10.0-031000rc4-generic #201306020443 SMP Sun Jun 2 08:43:56 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux)
With 3.10, when disabling power management (without touching to hwcrypt, BSSID or ANI) enables me to get the connectiion working at boot, but I get disconnected afterwards.
Disabling both power management and ANI helps me get the connection working at boot and keep it alive afterwards.
I've not disabled hwcrypt again as it seems to work, or added back a fixed BSSID in Network Manager, but I can do further testing if need be.
AP information
- from iwconfig
wlan0 IEEE 802.11bgn ESSID:"XXXX" Mode:Managed Frequency:2.462 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=19.5 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=33/70 Signal level=-77 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:21 Invalid misc:98 Missed beacon:0
2 weeks ago I tested the latest upstream kernel built for Ubuntu : kernel. ubuntu. com/~kernel- ppa/mainline/ v3.10-rc2- saucy/
http://
I had everything set to default (fresh Ubuntu install) and can confirm the bug was there.
I've been testing the latestet build today : kernel. ubuntu. com/~kernel- ppa/mainline/ v3.10-rc4- saucy/
http://
I have disabled all the workarounds I had previously set
- re-enabling ANI
- re-enabling power management
- re-enabling hwcrypt
- BSSID not set manually in Network Manager
I can confirm that the bug exists (tested this morning) 031000rc4- generic #201306020443 SMP Sun Jun 2 08:43:56 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux)
- in the standard Ubuntu kernel (3.8.0-23-generic)
- in the latest upstream kernel (3.10.0-
With 3.10, when disabling power management (without touching to hwcrypt, BSSID or ANI) enables me to get the connectiion working at boot, but I get disconnected afterwards.
Disabling both power management and ANI helps me get the connection working at boot and keep it alive afterwards.
I've not disabled hwcrypt again as it seems to work, or added back a fixed BSSID in Network Manager, but I can do further testing if need be.
AP information
Mode: Managed Frequency:2.462 GHz Access Point: XX:XX:XX:XX:XX:XX
- from iwconfig
wlan0 IEEE 802.11bgn ESSID:"XXXX"
Bit Rate=19.5 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=33/70 Signal level=-77 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:21 Invalid misc:98 Missed beacon:0
- from iwlist
Channel: 11
Frequency :2.462 GHz (Channel 11)
Quality= 56/70 Signal level=-54 dBm
Encryptio n key:on
ESSID: "XXXX"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode: Master
Extra: tsf=00000045352 652cc
Extra: Last beacon: 160ms ago
IE: Unknown: 0004434E474D
IE: Unknown: 010882848B960C1 21824
IE: Unknown: 03010B
IE: Unknown: 2A0104
IE: Unknown: 32043048606C
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authenticati on Suites (1) : PSK
IE: Unknown: 2D1A6C0003FFFFF F00010000000000 000001000000000 00000000000
IE: Unknown: 3D160B000700000 000000000000000 000000000000000 000
IE: Unknown: DD180050F202010 1000003A4000027 A4000042435E006 2322F00
wlan0 Scan completed :
Cell 01 - Address: XX:XX:XX:XX:XX:XX