Steps to verify:
1. Start Fuel installation.
2. Wait until fuelmenu is started.
3. Choice "Network Setup".
4. Select:
- Interface - eth1
- Enable interface - Yes
- Configuration via DHCP - Static
- fill "IP address", "Netmask" and "Default Gateway"
5. Press "Apply".
6. Check that Default Gateway is changed.
7. Check that iface eth1 is up after deployment of fuel master
Verified on fuel-6. 1-499-2015- 06-02_22- 09-35.iso.
Steps to verify:
1. Start Fuel installation.
2. Wait until fuelmenu is started.
3. Choice "Network Setup".
4. Select:
- Interface - eth1
- Enable interface - Yes
- Configuration via DHCP - Static
- fill "IP address", "Netmask" and "Default Gateway"
5. Press "Apply".
6. Check that Default Gateway is changed.
7. Check that iface eth1 is up after deployment of fuel master