Comment 1 for bug 13729

Revision history for this message
In , Eduard Bloch (edi-gmx) wrote : Re: Bug#186099: cdrecord: QSI CD-RW/DVD-ROM SBW-081 fails in erasing (and sometimes in burnig CDRW)

forwarded 186099 Joerg Schilling <email address hidden>
thanks

Hi Monari,

this is something for the upstream author.

#include <hallo.h>
* Monari Emanuele [Mon, Mar 24 2003, 04:27:58PM]:
> Package: cdrecord
> Version: 4:2.0+a05-1
> Severity: important
>
> In /var/log/dmesg my cdrecorder is detected also "QSI CD-RW/DVD-ROM
> SBW-081, ATAPI CD/DVD-ROM drive". It seems to work properly, but in case
> of CDRW blanking (either fast and all) or writing it fails and says (see below for complete output)
>
> $cdrecord -blank=xxx -v
> [...]
> cdrecord: Input/output error. blank unit: scsi sendcmd: no error
> CDB: A1 01 00 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 9600s
> cdrecord: Cannot blank disk, aborting.
>
> or in case of writing:
> $cdrecord -v --eject foo.iso
> cdrecord: Input/output error. read track info: scsi sendcmd: no error
> CDB: 52 01 00 00 00 FF 00 00 1C 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 240s
> Writing time: 0.013s
> Fixating...
> Fixating time: 0.190s
> cdrecord: fifo had 255 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
> Cheers,
> Monari Emanuele
>
>
> -- System Information:
> Debian Release: testing/unstable
> Architecture: i386
> Kernel: Linux little 2.4.20-mona-swsusp #1 mar mar 11 11:17:18 CET 2003 i686
> Locale: LANG=it_IT@euro, LC_CTYPE=it_IT@euro
>
> Versions of packages cdrecord depends on:
> ii debconf 1.2.33 Debian configuration management sy
> ii libc6 2.3.1-16 GNU C Library: Shared libraries an
> ii makedev 2.3.1-62 Creates device files in /dev.
>
> -- debconf information:
> * cdrecord/SUID_bit: true
> cdrecord/MAKEDEV: true
> cdrecord/MAKEDEVNEW: true
> cdrecord/do_it_yourself:
>
>
> output of blank=all
> Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.7'
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'QSI '
> Identifikation : 'DVD/CDRW SBW-081'
> Revision : 'NXA5'
> Device seems to be: Generic mmc2 DVD-ROM.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : MMC-2 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> Drive buf size : 1605632 = 1568 KB
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 6
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in: -11078 (97:34/22)
> ATIP start of lead out: 336075 (74:43/00)
> 1T speed low: 0 (reserved val 0) 1T speed high: 4
> 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
> power mult factor: 3 5
> recommended erase/write power: 3
> A1 values: 02 3A B0
> A2 values: 5C C6 26
> Disk type: Phase change
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Starting to write CD/DVD at speed 4 in real BLANK mode for single
> session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Performing OPC...
> Blanking entire disk
> cdrecord: Input/output error. blank unit: scsi sendcmd: no error
> CDB: A1 00 00 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 9600s
> cdrecord: Cannot blank disk, aborting.
>
>
>
> Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.7'
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'QSI '
> Identifikation : 'DVD/CDRW SBW-081'
> Revision : 'NXA5'
> Device seems to be: Generic mmc2 DVD-ROM.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : MMC-2 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> Drive buf size : 1605632 = 1568 KB
> FIFO size : 16777216 = 16384 KB
> Track 01: data unknown length
> Total size: 0 MB (00:00.00) = 0 sectors
> Lout start: 0 MB (00:02/00) = 0 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 6
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in: -11078 (97:34/22)
> ATIP start of lead out: 336075 (74:43/00)
> 1T speed low: 0 (reserved val 0) 1T speed high: 4
> 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
> power mult factor: 3 5
> recommended erase/write power: 3
> A1 values: 02 3A B0
> A2 values: 5C C6 26
> Disk type: Phase change
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Trying to clear drive status.
> cdrecord: Drive needs to reload the media to return to proper status.
> Re-load disk and hit <CR>
> Starting to write CD/DVD at speed 4 in real TAO mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Performing OPC...
> cdrecord: Input/output error. read track info: scsi sendcmd: no error
> CDB: 52 01 00 00 00 FF 00 00 1C 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 240s
> Writing time: 0.013s
> Fixating...
> Fixating time: 0.190s
> cdrecord: fifo had 255 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
>
>
>

--
Mathematiker ist kurz davor das erste mal mit einem Flugzeug zu
fliegen. Er hat wahnsinnig viel Angst - es könnte ja eine Bombe an
Bord sein. Dann hat der Mathematiker eine Idee: er nimmt selbst eine
Bombe mit, denn die Wahrscheinlichkeit das zwei Bomben in einem
Flugzeug sind ist wesentlich geringer, als daß eine Bombe im Flugzeug
ist.