Title:
Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Status in Genesi Efika MX Support:
New
Status in The Linux Kernel:
In Progress
Status in “bluez” package in Ubuntu:
Invalid
Status in “linux” package in Ubuntu:
Fix Released
Status in “bluez” source package in Intrepid:
Invalid
Status in “linux” source package in Intrepid:
Fix Released
Status in “bluez” source package in Jaunty:
Invalid
Status in “linux” source package in Jaunty:
Fix Released
Status in “bluez” package in Debian:
Confirmed
Status in “bluez-utils” package in Debian:
New
Status in “linux” package in Fedora:
Unknown
Bug description:
SRU justification:
Impact: A series of bluetooth dongles [1] do not work properly with the
new
btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb
driver.
Fix: The following three patches are required to fix this (two as
prerequisite
and one for the actual fix). The fix deviates from upstream by the
change
of a version number and the missing resume part which does not exist
for
Intrepid nor Jaunty.
Test: Fix has been tested by bug reporters.
---
Bluetooth doesn't work for at least the following devices:
ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
ID 1131:1004 Integrated System Solution Corp. Bluetooth Device
ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter
ID 0a5c:200a Broadcom Corp. Bluetooth dongle
They don't work properly with the newer btusb driver, which replaced
hci_usb by default in 2.6.27. This hasn't been fixed upstream as of
v2.6.29-rc3.
Original message below:
Association with Bluetooth works using kernel 2.6.26, since the
updates to 2.6.27 (both -1 and -2) association fails. I can scan and
see bluetooth devices but not pair.
Using my phone, I start the association process, the phone asks for a
passkey, and in 2.6.26 the popup window appears normally allowing me
to enter the passkey. In 2.6.27 the dialog box never appears.
If I use hcitool:
:~$ sudo hcitool cc 00:1B:59:96:A6:DD
:~$ sudo hcitool auth 00:1B:59:96:A6:DD
HCI authentication request failed: Connection timed out
the dialog box appears very very briefly then vanishes.
I gave up!
-----Original Message-----
From: Tomas Neme
Sent: Thursday, April 18, 2013 3:27 PM
To: <email address hidden>
Subject: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0
commandtx timeout)
any news on this? I have ubuntu 12.10 and latest kernel:
Linux Roller 3.2.0-39-generic #62-Ubuntu SMP Thu Feb 28 00:28:53 UTC
2013 x86_64 x86_64 x86_64 GNU/Linux
-- /bugs.launchpad .net/bugs/ 268502
You received this bug notification because you are subscribed to the bug
report.
https:/
Title:
Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Status in Genesi Efika MX Support:
New
Status in The Linux Kernel:
In Progress
Status in “bluez” package in Ubuntu:
Invalid
Status in “linux” package in Ubuntu:
Fix Released
Status in “bluez” source package in Intrepid:
Invalid
Status in “linux” source package in Intrepid:
Fix Released
Status in “bluez” source package in Jaunty:
Invalid
Status in “linux” source package in Jaunty:
Fix Released
Status in “bluez” package in Debian:
Confirmed
Status in “bluez-utils” package in Debian:
New
Status in “linux” package in Fedora:
Unknown
Bug description:
SRU justification:
Impact: A series of bluetooth dongles [1] do not work properly with the
(2.6. 29-rc3) . The required changes are all local to the btusb
new
btusb driver which replaced usb_hci. This has been fixed upstream
driver.
Fix: The following three patches are required to fix this (two as
prerequisite
and one for the actual fix). The fix deviates from upstream by the
change
of a version number and the missing resume part which does not exist
for
Intrepid nor Jaunty.
Test: Fix has been tested by bug reporters.
---
Bluetooth doesn't work for at least the following devices:
ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
ID 1131:1004 Integrated System Solution Corp. Bluetooth Device
ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter
ID 0a5c:200a Broadcom Corp. Bluetooth dongle
They don't work properly with the newer btusb driver, which replaced
hci_usb by default in 2.6.27. This hasn't been fixed upstream as of
v2.6.29-rc3.
Original message below:
Association with Bluetooth works using kernel 2.6.26, since the
updates to 2.6.27 (both -1 and -2) association fails. I can scan and
see bluetooth devices but not pair.
Using my phone, I start the association process, the phone asks for a
passkey, and in 2.6.26 the popup window appears normally allowing me
to enter the passkey. In 2.6.27 the dialog box never appears.
If I use hcitool:
:~$ sudo hcitool cc 00:1B:59:96:A6:DD
:~$ sudo hcitool auth 00:1B:59:96:A6:DD
HCI authentication request failed: Connection timed out
the dialog box appears very very briefly then vanishes.
dmesg shows a couple of problems:
[25791.306170] btusb_intr_ complete: hci0 urb ffff88004dd0fb40 failed to
resubmit (19)
[25791.315446] btusb_send_frame: hci0 urb ffff880048542840 submission
failed
and the syslog shows that there was an attempt to associate:
Sep 23 08:16:59 charlie hcid[5903]: link_key_request 11:67:9C: 59:B5, dba=00: 1B:59:96: A6:DD) 11:67:9C: 59:B5, dba=00: 1B:59:96: A6:DD)
(sba=00:
Sep 23 08:16:59 charlie hcid[5903]: pin_code_request
(sba=00:
To manage notifications about this bug go to: /bugs.launchpad .net/efikamx/ +bug/268502/ +subscriptions
https:/