As you can see there is something wrong with the modelines I think. ddcprobe gives me the following information and as you can see on the bottom there is written "dtiming: 1920x1200@58". So I don't know why I need a modeline which says
modeline "1920x1200@60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
It doesn't seem to be correct, I only get problems with it.
Hopefully this will be fixed.
$ sudo ddcprobe
vbe: VESA 3.0 detected. oem: NVIDIA vendor: NVIDIA Corporation product: G84 Board - p402h00 Chip Rev memory: 14336kb mode: 640x400x256 mode: 640x480x256 mode: 800x600x16 mode: 800x600x256 mode: 1024x768x16 mode: 1024x768x256 mode: 1280x1024x16 mode: 1280x1024x256 mode: 320x200x64k mode: 320x200x16m mode: 640x480x64k mode: 640x480x16m mode: 800x600x64k mode: 800x600x16m mode: 1024x768x64k mode: 1024x768x16m mode: 1280x1024x64k mode: 1280x1024x16m edid: edid: 1 3 id: 766a eisa: BNQ766a serial: 00000007 manufacture: 3 2005 input: analog signal. screensize: 50 31 gamma: 2.200000 dpms: RGB, active off, suspend, standby timing: 720x400@70 Hz (VGA 640x400, IBM) timing: 640x480@60 Hz (VGA) timing: 640x480@67 Hz (Mac II, Apple) timing: 640x480@72 Hz (VESA) timing: 640x480@75 Hz (VESA) timing: 800x600@60 Hz (VESA) timing: 800x600@72 Hz (VESA) timing: 800x600@75 Hz (VESA) timing: 832x624@75 Hz (Mac II) timing: 1024x768@87 Hz Interlaced (8514A) timing: 1024x768@70 Hz (VESA) timing: 1024x768@75 Hz (VESA) timing: 1280x1024@75 (VESA) ctiming: 1152x864@75 ctiming: 1280x1024@60 ctiming: 1280x1024@72 ctiming: 1280x1024@75 ctiming: 1600x1200@60 dtiming: 1920x1200@58 monitorname: BenQ FP231W dtiming: 1920x1080@58 monitorrange: 31-80, 56-76
As you can see there is something wrong with the modelines I think. ddcprobe gives me the following information and as you can see on the bottom there is written "dtiming: 1920x1200@58".
So I don't know why I need a modeline which says
modeline "1920x1200@60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
It doesn't seem to be correct, I only get problems with it.
Hopefully this will be fixed.
$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: NVIDIA
vendor: NVIDIA Corporation
product: G84 Board - p402h00 Chip Rev
memory: 14336kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 1024x768x16
mode: 1024x768x256
mode: 1280x1024x16
mode: 1280x1024x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x64k
mode: 1280x1024x16m
edid:
edid: 1 3
id: 766a
eisa: BNQ766a
serial: 00000007
manufacture: 3 2005
input: analog signal.
screensize: 50 31
gamma: 2.200000
dpms: RGB, active off, suspend, standby
timing: 720x400@70 Hz (VGA 640x400, IBM)
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@72 Hz (VESA)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@72 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@70 Hz (VESA)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)
ctiming: 1152x864@75
ctiming: 1280x1024@60
ctiming: 1280x1024@72
ctiming: 1280x1024@75
ctiming: 1600x1200@60
dtiming: 1920x1200@58
monitorname: BenQ FP231W
dtiming: 1920x1080@58
monitorrange: 31-80, 56-76