Op 28-08-12 19:19, Till Kamppeter schreef:
> Can you run the command
>
> lpadmin -p <printer> -o usb-unidir-default=true
arie@ubnew1204:~$ lpstat -v
device for HL-1430-series: usb://Brother/HL-1430%20series
arie@ubnew1204:~$ lpadmin -p HL-1430-series -o usb-unidir-default=true
>
>
>
> Then remove all stuck jobs from the print queue and turn off and turn on
> the printer. Does the problem go away now?
You can print one time after this, but the next time it lasts 1 minute before
it prints (normally 5 seconds) and gives a blank page.
>
>
> If not, try the command
>
> lpadmin -p <printer> -o usb-no-reattach-default=true
>
> clear the print queue and power-cycle the printer. Does it work now? If
> yes, try to remove the first workaround via
Yes, it looks ok now.
>
>
> lpadmin -p <printer> -R usb-unidir-default
>
> Does it still work?
Yes
>
>
> To remove also the other workaround run
>
> lpadmin -p <printer> -R usb-no-reattach-default
arie@ubnew1204:~$ lpadmin -p HL-1430-series -R usb-no-reattach-default
>
>
> Please post also the output of the command
>
> lsusb
arie@ubnew1204:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2040:7050 Hauppauge Nova-T Stick
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 004: ID 04f9:001a Brother Industries, Ltd HL-1430 Laser Printer
>
>
> This way we get the USB IDs of the printer to be able to add permanent
> exception rules to the CUPS USB backend.
>
>
> ** Also affects: cups (Ubuntu)
> Importance: Undecided
> Status: New
>
> ** Changed in: cups (Ubuntu)
> Status: New => Incomplete
>
> ** Changed in: cups (Ubuntu)
> Importance: Undecided => Medium
>
It looks like it is ok now. I shall reboot my system and try it again.
Op 28-08-12 19:19, Till Kamppeter schreef: default= true
> Can you run the command
>
> lpadmin -p <printer> -o usb-unidir-
arie@ubnew1204:~$ lpstat -v
device for HL-1430-series: usb://Brother/ HL-1430% 20series
arie@ubnew1204:~$ lpadmin -p HL-1430-series -o usb-unidir- default= true reattach- default= true
>
>
>
> Then remove all stuck jobs from the print queue and turn off and turn on
> the printer. Does the problem go away now?
You can print one time after this, but the next time it lasts 1 minute before
it prints (normally 5 seconds) and gives a blank page.
>
>
> If not, try the command
>
> lpadmin -p <printer> -o usb-no-
>
> clear the print queue and power-cycle the printer. Does it work now? If
> yes, try to remove the first workaround via
arie@ubnew1204:~$ lpadmin -p HL-1430-series -o usb-no- reattach- default= true
Yes, it looks ok now. reattach- default
>
>
> lpadmin -p <printer> -R usb-unidir-default
>
> Does it still work?
Yes
>
>
> To remove also the other workaround run
>
> lpadmin -p <printer> -R usb-no-
arie@ubnew1204:~$ lpadmin -p HL-1430-series -R usb-no- reattach- default
>
>
> Please post also the output of the command
>
> lsusb
arie@ubnew1204:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2040:7050 Hauppauge Nova-T Stick
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 004: ID 04f9:001a Brother Industries, Ltd HL-1430 Laser Printer
>
>
> This way we get the USB IDs of the printer to be able to add permanent
> exception rules to the CUPS USB backend.
>
>
> ** Also affects: cups (Ubuntu)
> Importance: Undecided
> Status: New
>
> ** Changed in: cups (Ubuntu)
> Status: New => Incomplete
>
> ** Changed in: cups (Ubuntu)
> Importance: Undecided => Medium
>
It looks like it is ok now. I shall reboot my system and try it again.
Thank you very much so far !!!!
Arie