xorg consumes 100% cpu black screen

Bug #97360 reported by Mark Carey
2
Affects Status Importance Assigned to Milestone
xorg (Ubuntu)
New
Undecided
Unassigned

Bug Description

Binary package hint: xserver-xorg

Running Fiesty 7.04 Beta.

Updated a whole heap of packages in the last day, including xserver-xorg 1:7.2-9ubuntu9.

I am unable to get the xserver up if I use either the nv or nvidia driver, if I use the vesa driver the server starts ok.

If i use the nvidia or the nv driver then the machine tries to start gdm, the sreen goes black and the machine sits there with Xorg consuming 100% cpu (I can ssh into the machine while it is chewing cpu from another machine). As root I am unable to kill the Xorg process, but I can do other things, reboot, apt-get update, etc .....

Any suggestions?

lspci -vxxx

00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
 Flags: bus master, fast devsel, latency 0
 Memory at 48000000 (32-bit, prefetchable) [size=64M]
 Capabilities: [88] Vendor Specific Information
 Capabilities: [a0] AGP version 2.0
00: 86 80 30 11 06 01 90 20 02 00 00 06 00 00 00 00
10: 08 00 00 48 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 44 02 97 38 00 00 00 00 00 10 11 01 00 00 33 33
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 28 a8 00 00 00 00 00 00 00 00 00 00 00 00
80: de a0 ce 07 00 00 00 00 09 a0 04 f1 00 00 00 00
90: 00 00 af e3 f8 ff 00 00 64 80 64 80 85 83 c4 04
a0: 02 00 20 00 07 02 00 1f 00 00 00 00 00 00 00 00
b0: 00 00 00 00 30 00 00 00 00 00 8e 09 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 60 1c 00 00 00 00
f0: 00 00 00 00 74 f8 00 00 00 00 00 00 08 01 00 00

00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
 Flags: bus master, 66MHz, fast devsel, latency 64
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
 Memory behind bridge: 41000000-421fffff
 Prefetchable memory behind bridge: 44000000-45ffffff
00: 86 80 31 11 07 01 20 00 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 a0 22
20: 00 41 10 42 00 44 f0 45 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 01) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
 I/O behind bridge: 00001000-00001fff
 Memory behind bridge: 40000000-402fffff
00: 86 80 4e 24 07 01 80 00 01 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 40 10 10 80 22
20: 00 40 20 40 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
40: 00 28 20 20 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00

00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 01)
 Flags: bus master, medium devsel, latency 0
00: 86 80 40 24 0f 01 80 02 01 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 f8 00 00 10 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 01 fa 00 00 10 00 00 00
60: 80 8b 8a 80 d0 00 00 00 85 80 80 85 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: f5 54 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 20 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 86 21 00 00 06 0f 00 00 04 00 00 00 00 00 00 00
e0: 10 00 00 80 01 04 0f 14 33 22 11 00 71 07 67 45
f0: 0f 00 4c 01 00 00 00 00 47 0f 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 01) (prog-if 80 [Master])
 Subsystem: Intel Corporation Unknown device 2411
 Flags: bus master, medium devsel, latency 0
 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
 [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
 [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
 [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
 I/O ports at 2460 [size=16]
00: 86 80 4b 24 05 00 80 02 01 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 24 00 00 00 00 00 00 00 00 00 00 86 80 11 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 27 e3 32 c0 b0 00 00 00 09 00 01 20 00 00 00 00
50: 00 00 00 00 98 10 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00

00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
 Subsystem: Intel Corporation Unknown device 2411
 Flags: bus master, medium devsel, latency 0, IRQ 16
 I/O ports at 2440 [size=32]
00: 86 80 44 24 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 24 00 00 00 00 00 00 00 00 00 00 86 80 11 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00

00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 01)
 Subsystem: Compaq Computer Corporation Unknown device 000e
 Flags: bus master, medium devsel, latency 0, IRQ 18
 I/O ports at 2000 [size=256]
 I/O ports at 2400 [size=64]
00: 86 80 45 24 05 00 80 02 01 00 01 04 00 00 00 00
10: 01 20 00 00 01 24 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 0e 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 15) (prog-if 00 [VGA])
 Subsystem: Compaq Computer Corporation Unknown device 001f
 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
 Memory at 41000000 (32-bit, non-prefetchable) [size=16M]
 Memory at 44000000 (32-bit, prefetchable) [size=32M]
 [virtual] Expansion ROM at 42000000 [disabled] [size=64K]
 Capabilities: [60] Power Management version 1
 Capabilities: [44] AGP version 2.0
00: de 10 28 00 07 00 b0 02 15 00 00 03 00 40 00 00
10: 00 00 00 41 08 00 00 44 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 1f 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 11 0e 1f 00 02 00 20 00 07 02 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 01 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 01)
 Subsystem: Compaq Computer Corporation EtherExpress PRO/100 VM
 Flags: bus master, medium devsel, latency 66, IRQ 17
 Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
 I/O ports at 1000 [size=64]
 Capabilities: [dc] Power Management version 2
00: 86 80 49 24 07 01 90 02 01 00 00 02 08 42 00 00
10: 00 00 00 40 01 10 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 12 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe
e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

dmesg

[ 0.000000] Linux version 2.6.20-13-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu 2.6.20-13.21-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fed0000 end: 000000000ffd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000ffd0000 size: 0000000000020000 end: 000000000fff0000 type: 4
[ 0.000000] copy_e820_map() start: 000000000fff0000 size: 0000000000010000 end: 0000000010000000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000feea0000 size: 0000000001160000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000000ffd0000 - 000000000fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff0000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7d30
[ 0.000000] Entering add_active_range(0, 0, 65536) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65536
[ 0.000000] HighMem 65536 -> 65536
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65536
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010
[ 0.000000] ACPI: RSDT (v001 COMPAQ CPQ0004 0x20010405 0x00000000) @ 0x000e0080
[ 0.000000] ACPI: FADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e0130
[ 0.000000] ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e136c
[ 0.000000] ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e14e0
[ 0.000000] ACPI: MADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e01a4
[ 0.000000] ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000d) @ 0x000e3277
[ 0.000000] ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e2380
[ 0.000000] ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000d) @ 0x000e2a8b
[ 0.000000] ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2c1f
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e2e83
[ 0.000000] ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2d51
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF3 0x00000001 MSFT 0x0100000d) @ 0x000e317a
[ 0.000000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eeea0000)
[ 0.000000] Detected 863.917 MHz processor.
[ 24.636386] Built 1 zonelists. Total pages: 65024
[ 24.636395] Kernel command line: root=UUID=845cb7c5-a215-4ab3-8c52-ae89b6f79ae9 ro quiet
[ 24.636819] mapped APIC to ffffd000 (fee00000)
[ 24.636825] mapped IOAPIC to ffffc000 (fec00000)
[ 24.636833] Enabling fast FPU save and restore... done.
[ 24.636840] Enabling unmasked SIMD FPU exception support... done.
[ 24.636859] Initializing CPU#0
[ 24.636945] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 24.638347] Console: colour VGA+ 80x25
[ 24.638749] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.639133] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.660867] Memory: 248768k/262144k available (1992k kernel code, 12720k reserved, 889k data, 328k init, 0k highmem)
[ 24.660894] virtual kernel memory layout:
[ 24.660897] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 24.660900] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.660904] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 24.660907] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 24.660910] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 24.660913] .data : 0xc02f2184 - 0xc03d06d4 ( 889 kB)
[ 24.660917] .text : 0xc0100000 - 0xc02f2184 (1992 kB)
[ 24.660925] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.740923] Calibrating delay using timer specific routine.. 1729.22 BogoMIPS (lpj=3458449)
[ 24.741017] Security Framework v1.0.0 initialized
[ 24.741033] SELinux: Disabled at boot.
[ 24.741072] Mount-cache hash table entries: 512
[ 24.741358] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.741382] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 24.741389] CPU: L2 cache: 256K
[ 24.741396] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 24.741417] Compat vDSO mapped to ffffe000.
[ 24.741432] Remapping vsyscall page to ffffe000
[ 24.741453] Checking 'hlt' instruction... OK.
[ 24.757111] SMP alternatives: switching to UP code
[ 24.757451] Freeing SMP alternatives: 11k freed
[ 24.757858] Early unpacking initramfs... done
[ 25.487716] ACPI: Core revision 20060707
[ 25.487951] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.492335] CPU0: Intel Pentium III (Coppermine) stepping 0a
[ 25.492390] Total of 1 processors activated (1729.22 BogoMIPS).
[ 25.492530] ENABLING IO-APIC IRQs
[ 25.492772] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.636776] Brought up 1 CPUs
[ 25.637298] Booting paravirtualized kernel on bare hardware
[ 25.637430] Time: 10:39:22 Date: 02/28/107
[ 25.637498] NET: Registered protocol family 16
[ 25.637704] EISA bus registered
[ 25.637715] ACPI: bus type pci registered
[ 25.639133] PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
[ 25.639139] PCI: Using configuration type 1
[ 25.639144] Setting up standard PCI resources
[ 25.710562] ACPI: Interpreter enabled
[ 25.710572] ACPI: Using IOAPIC for interrupt routing
[ 25.711682] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 25.712162] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 25.712636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11)
[ 25.713138] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 25.713614] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 25.714082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 25.714558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 25.715035] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11)
[ 25.715343] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.715354] PCI: Probing PCI hardware (bus 00)
[ 25.716105] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 25.716806] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
[ 25.716815] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
[ 25.717095] Boot video device is 0000:01:00.0
[ 25.717233] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 25.717309] PCI: Transparent bridge - 0000:00:1e.0
[ 25.717351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.722713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 25.728990] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.729035] pnp: PnP ACPI init
[ 25.736035] pnp: PnP ACPI: found 15 devices
[ 25.736048] PnPBIOS: Disabled by ACPI PNP
[ 25.736184] PCI: Using ACPI for IRQ routing
[ 25.736192] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.881769] NET: Registered protocol family 8
[ 25.881775] NET: Registered protocol family 20
[ 25.882868] pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 25.882883] pnp: 00:0d: ioport range 0x400-0x41f has been reserved
[ 25.882893] pnp: 00:0d: ioport range 0x420-0x43f has been reserved
[ 25.882900] pnp: 00:0d: ioport range 0x440-0x45f has been reserved
[ 25.882907] pnp: 00:0d: ioport range 0x460-0x47f could not be reserved
[ 25.882914] pnp: 00:0d: ioport range 0xf800-0xf81f could not be reserved
[ 25.882922] pnp: 00:0d: ioport range 0xf820-0xf83f could not be reserved
[ 25.882929] pnp: 00:0d: ioport range 0xf840-0xf85f has been reserved
[ 25.882936] pnp: 00:0d: ioport range 0xf860-0xf87f has been reserved
[ 25.883589] PCI: Bridge: 0000:00:01.0
[ 25.883596] IO window: disabled.
[ 25.883605] MEM window: 41000000-421fffff
[ 25.883612] PREFETCH window: 44000000-45ffffff
[ 25.883620] PCI: Bridge: 0000:00:1e.0
[ 25.883626] IO window: 1000-1fff
[ 25.883634] MEM window: 40000000-402fffff
[ 25.883640] PREFETCH window: disabled.
[ 25.883664] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 25.883724] NET: Registered protocol family 2
[ 25.920801] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.920987] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.921167] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 25.921262] TCP: Hash tables configured (established 8192 bind 4096)
[ 25.921268] TCP reno registered
[ 25.932912] checking if image is initramfs... it is
[ 27.311859] Freeing initrd memory: 6776k freed
[ 27.312914] audit: initializing netlink socket (disabled)
[ 27.312947] audit(1175078363.760:1): initialized
[ 27.313246] VFS: Disk quotas dquot_6.5.1
[ 27.313292] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.313404] io scheduler noop registered
[ 27.313411] io scheduler anticipatory registered
[ 27.313417] io scheduler deadline registered
[ 27.313443] io scheduler cfq registered (default)
[ 27.313948] isapnp: Scanning for PnP cards...
[ 27.667750] isapnp: No Plug & Play device found
[ 27.739441] Real Time Clock Driver v1.12ac
[ 27.739545] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.739733] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.740101] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.741529] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.742024] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.742557] mice: PS/2 mouse device common for all mice
[ 27.743882] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.744495] input: Macintosh mouse button emulation as /class/input/input0
[ 27.744579] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 27.744588] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 27.744984] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 27.748934] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.748950] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.749296] EISA: Probing bus 0 at eisa.0
[ 27.749314] Cannot allocate resource for EISA slot 1
[ 27.749320] Cannot allocate resource for EISA slot 2
[ 27.749354] EISA: Detected 0 cards.
[ 27.779544] TCP cubic registered
[ 27.779563] NET: Registered protocol family 1
[ 27.779612] Using IPI No-Shortcut mode
[ 27.779756] ACPI: (supports S0 S1 S3 S4 S5)
[ 27.779848] Magic number: 15:277:680
[ 27.780146] Time: tsc clocksource has been installed.
[ 27.780937] Freeing unused kernel memory: 328k freed
[ 27.794413] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.218706] Capability LSM initialized
[ 28.314461] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 29.494023] SCSI subsystem initialized
[ 29.514021] libata version 2.20 loaded.
[ 29.519925] ata_piix 0000:00:1f.1: version 2.10ac1
[ 29.519978] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 29.520083] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012460 irq 14
[ 29.520151] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012468 irq 15
[ 29.520182] scsi0 : ata_piix
[ 29.556332] usbcore: registered new interface driver usbfs
[ 29.556383] usbcore: registered new interface driver hub
[ 29.556440] usbcore: registered new device driver usb
[ 29.559955] USB Universal Host Controller Interface driver v3.0
[ 29.666123] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 29.666133] e100: Copyright(c) 1999-2006 Intel Corporation
[ 29.691861] ata1.00: ATA-6: Maxtor 5T020H2, TAH71DP0, max UDMA/100
[ 29.691874] ata1.00: 39102336 sectors, multi 16: LBA
[ 29.703863] ata1.00: configured for UDMA/100
[ 29.703891] scsi1 : ata_piix
[ 29.852599] Floppy drive(s): fd0 is 1.44M
[ 29.902006] FDC 0 is a post-1991 82077
[ 30.035793] ata2.01: ATAPI, max UDMA/66
[ 30.207750] ata2.01: configured for UDMA/66
[ 30.208022] scsi 0:0:0:0: Direct-Access ATA Maxtor 5T020H2 TAH7 PQ: 0 ANSI: 5
[ 30.209524] scsi 1:0:1:0: CD-ROM SONY DVD RW DRU-820A 1.0c PQ: 0 ANSI: 5
[ 30.218110] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16
[ 30.218135] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 30.218144] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 30.218353] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
[ 30.218395] uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440
[ 30.218652] usb usb1: configuration #1 chosen from 1 choice
[ 30.218717] hub 1-0:1.0: USB hub found
[ 30.218736] hub 1-0:1.0: 2 ports detected
[ 30.251539] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 30.253003] sda: Write Protect is off
[ 30.253014] sda: Mode Sense: 00 3a 00 00
[ 30.253078] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.253212] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 30.253236] sda: Write Protect is off
[ 30.253242] sda: Mode Sense: 00 3a 00 00
[ 30.253278] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.253286] sda: sda1 sda2 < sda5 >
[ 30.292736] sd 0:0:0:0: Attached scsi disk sda
[ 30.305470] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.305750] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 30.323931] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 30.410524] e100: eth0: e100_probe: addr 0x40000000, irq 17, MAC addr 00:02:A5:83:E1:C9
[ 30.440434] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 30.440447] Uniform CD-ROM driver Revision: 3.20
[ 30.441044] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 30.594428] Attempting manual resume
[ 30.594437] swsusp: Resume From Partition 8:5
[ 30.594442] PM: Checking swsusp image.
[ 30.594746] PM: Resume from disk failed.
[ 30.665022] kjournald starting. Commit interval 5 seconds
[ 30.665050] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.108650] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 43.034944] NET: Registered protocol family 17
[ 43.680820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.685886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.311555] Linux agpgart interface v0.102 (c) Dave Jones
[ 44.316708] agpgart: Detected an Intel i815 Chipset.
[ 44.320976] agpgart: AGP aperture is 64M @ 0x48000000
[ 44.829838] iTCO_vendor_support: vendor-support=0
[ 45.323116] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[ 45.529083] input: PC Speaker as /class/input/input3
[ 45.547864] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 45.548039] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x7860)
[ 45.548065] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
[ 45.548129] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.623102] parport: PnPBIOS parport detected.
[ 45.623161] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 45.683457] intel_rng: FWH not detected
[ 46.764730] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
[ 46.764776] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 47.082923] intel8x0_measure_ac97_clock: measured 56103 usecs
[ 47.082933] intel8x0: clocking to 41139
[ 47.321111] fuse init (API version 7.8)
[ 47.368993] lp0: using parport0 (interrupt-driven).
[ 47.437421] Adding 746980k swap on /dev/disk/by-uuid/38f7c344-d972-409b-9037-2857a2c01509. Priority:-1 extents:1 across:746980k
[ 47.600656] EXT3 FS on sda1, internal journal
[ 50.188067] NET: Registered protocol family 10
[ 50.188282] lo: Disabled Privacy Extensions
[ 55.956626] input: Power Button (FF) as /class/input/input4
[ 55.957125] ACPI: Power Button (FF) [PWRF]
[ 55.976614] input: Power Button (CM) as /class/input/input5
[ 55.977097] ACPI: Power Button (CM) [PBTN]
[ 56.198531] Using specific hotkey driver
[ 56.511851] ibm_acpi: ec object not found
[ 56.605600] No dock devices found.
[ 56.788404] pcc_acpi: loading...
[ 60.471310] eth0: no IPv6 routers present
[ 64.390187] ppdev: user-space parallel port driver
[ 67.906311] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 67.906323] apm: overridden by ACPI.
[ 71.864100] Bluetooth: Core ver 2.11
[ 71.864214] NET: Registered protocol family 31
[ 71.864220] Bluetooth: HCI device and connection manager initialized
[ 71.864240] Bluetooth: HCI socket layer initialized
[ 71.950269] Bluetooth: L2CAP ver 2.8
[ 71.950280] Bluetooth: L2CAP socket layer initialized
[ 71.965415] Bluetooth: RFCOMM socket layer initialized
[ 71.965445] Bluetooth: RFCOMM TTY layer initialized
[ 71.965450] Bluetooth: RFCOMM ver 1.8
[ 78.590432] eth0: no IPv6 routers present

Revision history for this message
Mark Carey (careym) wrote :
Download full text (88.2 KiB)

/etc/X11/xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
 FontPath "/usr/share/fonts/X11/misc"
 FontPath "/usr/share/fonts/X11/cyrillic"
 FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/Type1"
 FontPath "/usr/share/fonts/X11/100dpi"
 FontPath "/usr/share/fonts/X11/75dpi"
 # path to defoma fonts
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
 Load "bitmap"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "int10"
 Load "vbe"
EndSection

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "kbd"
 Option "CoreKeyboard"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "us"
 Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "ExplorerPS/2"
 Option "ZAxisMapping" "4 5"
 Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "stylus"
 Option "Device" "/dev/wacom" # Change to
       # /dev/input/event
       # for USB
 Option "Type" "stylus"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "eraser"
 Option "Device" "/dev/wacom" # Change to
       # /dev/input/event
       # for USB
 Option "Type" "eraser"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "cursor"
 Option "Device" "/dev/wacom" # Change to
       # /dev/input/event
       # for USB
 Option "Type" "cursor"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
 Identifier "Generic Video Card"
 Driver "vesa"
 BusID "PCI:1:0:0"
EndSection

Section "Monitor"
 Identifier "Generic Monitor"
 Option "DPMS"
 HorizSync 28-64
 VertRefresh 43-60
EndSection

Section "Screen"
 Identifier "Default Screen"
 Device "Generic Video Card"
 Monitor "Generic Monitor"
 DefaultDepth 24
 SubSection "Display"
  Depth 1
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 4
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 8
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 15
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 16
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "D...

Revision history for this message
Timo Aaltonen (tjaalton) wrote :

This is a duplicate. In the future, please attach the logs as files.

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.