[82865g] Playing video with acceleration enabled crashes Xorg
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
xserver-xorg-video-intel (Ubuntu) |
Fix Released
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: xserver-
After resolving the DRI issue with the Intel 865G I have been encountering unworkable video problems with streaming video, slide shows and flash.
As can be seen from the section of the xorg.conf file I have been trying a number of variations.
Section "Device"
VendorName "Intel Corporation"
BoardName "Intel 82865G"
Identifier "82865G Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
# Option "XvMC" "true"
Option "DRI" "False"
# Option "NoAccel" "True"
# Option "AccelMethod" "UXA" # "EXA"
Option "DPMS" "false"
# Option "Legacy3d" "false"
EndSection
The only solution I have found so far is to use the 'Option "NoAccel" "True"' line and with this video will run, although very poorly, and the system is virtually unusable for anything else.
With the 'NoAccel' line commented as above X will act exactly as though Ctrl+Alt+Backspace has been pressed. So far I have been unable to get UXA to run as it hangs the system. There are no error messages and I can find nothing in the logs.
This is in 9.04 with all updates as of the evening of March 30, 09
Related branches
j.scott.gwin@gmail.com (j.scott.gwin) wrote : | #1 |
Changed in xserver-xorg-video-intel: | |
status: | New → Confirmed |
Bryce Harrington (bryce) wrote : | #2 |
Please collect a full backtrace - see http://
Also, if you could attach your lspci -vvnn output and Xorg.0.log that would be of use.
Changed in xserver-xorg-video-intel (Ubuntu): | |
status: | Confirmed → Incomplete |
wilbur (wilburgr) wrote : Re: [Bug 352760] Re: Intel 82865G. Unable to run video with Acceleration on. Causes and imediate restart in X exactly like Ctl+Alt+Bksp. | #3 |
- Xorg.0.log Edit (33.6 KiB, text/x-log; charset=UTF-8; name="Xorg.0.log")
lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G
Integrated Graphics Controller [8086:2572] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ed98 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: intelfb
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02)
Subsystem: Dell Device [1028:0174]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSE...
wilbur (wilburgr) wrote : | #4 |
- Xorg.0.log Edit (36.7 KiB, text/x-log; charset=UTF-8; name="Xorg.0.log")
- Suzuki.wmv Edit (1.8 MiB, video/x-ms-wmv; name="Suzuki.wmv")
This log is from directly after a crash trying to play this video the
attached video in mplayer.
2009/4/1 Bryce Harrington <email address hidden>
> Please collect a full backtrace - see
> http://
>
> Also, if you could attach your lspci -vvnn output and Xorg.0.log that
> would be of use.
>
> ** Changed in: xserver-
> Status: Confirmed => Incomplete
>
> --
> Intel 82865G. Unable to run video with Acceleration on. Causes and imediate
> restart in X exactly like Ctl+Alt+Bksp.
> https:/
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “xserver-
>
> Bug description:
> Binary package hint: xserver-
>
> After resolving the DRI issue with the Intel 865G I have been encountering
> unworkable video problems with streaming video, slide shows and flash.
>
> As can be seen from the section of the xorg.conf file I have been trying a
> number of variations.
>
> Section "Device"
> VendorName "Intel Corporation"
> BoardName "Intel 82865G"
> Identifier "82865G Integrated Graphics Controller"
> Driver "intel"
> BusID "PCI:0:2:0"
> # Option "XvMC" "true"
> Option "DRI" "False"
> # Option "NoAccel" "True"
> # Option "AccelMethod" "UXA" # "EXA"
> Option "DPMS" "false"
> # Option "Legacy3d" "false"
> EndSection
>
> The only solution I have found so far is to use the 'Option "NoAccel"
> "True"' line and with this video will run, although very poorly, and the
> system is virtually unusable for anything else.
>
> With the 'NoAccel' line commented as above X will act exactly as though
> Ctrl+Alt+Backspace has been pressed. So far I have been unable to get UXA to
> run as it hangs the system. There are no error messages and I can find
> nothing in the logs.
>
> This is in 9.04 with all updates as of the evening of March 30, 09
>
Tomasz Czapiewski (xeros) wrote : Re: Intel 82865G. Unable to run video with Acceleration on. Causes and imediate restart in X exactly like Ctl+Alt+Bksp. | #5 |
- Xorg.0.log.old Edit (22.9 KiB, application/x-trash)
I can confirm this bug, too.
Todays build Kubuntu jaunty desktop i386 CD + mplayer installed.
Attached logs are catched "directly after a crash trying to play this video the
attached video in mplayer". Mplayer window shows with blue background and after a second Xorg is crashing.
Tomasz Czapiewski (xeros) wrote : | #6 |
Tomasz Czapiewski (xeros) wrote : | #7 |
Tomasz Czapiewski (xeros) wrote : | #8 |
- mplayer -vo x11 Suzuki.wmv Edit (102.6 KiB, text/plain)
Log from working "mplayer -vo x11 Suzuki.wmv" command.
Tomasz Czapiewski (xeros) wrote : | #9 |
- mplayer -vo gl Suzuki.wmv Edit (13.3 KiB, text/plain)
Log from working "mplayer -vo gl Suzuki.wmv" command, but slow in fullscreen due to DRI disabled by current packages.
Tomasz Czapiewski (xeros) wrote : | #10 |
- mplayer -vo xv Suzuki.wmv Edit (4.1 KiB, text/plain)
Log from crashing Xorg "mplayer -vo xv Suzuki.wmv" command.
Tomasz Czapiewski (xeros) wrote : | #11 |
I've tried to use UXA and XAA, too.
UXA does hang/crash Xorg on Xorg start so I can't even check XV there, but with XAA an XV the video is played for few seconds (I can see the playing movie on the screen but with image artefacts - in the mouse pointer place and some on the video window) and then Xorg hard locks - even keyboard does not work (numlock etc.).
Carey Underwood (cwillu) wrote : | #12 |
Tomasz, can you collect a full backtrace of the crash?
See http://
tags: | added: 865g hang intel |
summary: |
- Intel 82865G. Unable to run video with Acceleration on. Causes and - imediate restart in X exactly like Ctl+Alt+Bksp. + [82865Gg] Unable to run video with Acceleration on. Causes and imediate + restart in X exactly like Ctl+Alt+Bksp. |
summary: |
- [82865Gg] Unable to run video with Acceleration on. Causes and imediate + [82865g] Unable to run video with Acceleration on. Causes and imediate restart in X exactly like Ctl+Alt+Bksp. |
summary: |
- [82865g] Unable to run video with Acceleration on. Causes and imediate - restart in X exactly like Ctl+Alt+Bksp. + [82865g] Playing video with acceleration enabled crashes Xorg |
Launchpad Janitor (janitor) wrote : | #13 |
This bug was fixed in the package xserver-
---------------
xserver-
* Add 119_drm_
- The first time through the Xv code, an allocated buffer is
unreferenced but the pointer is not reset to NULL. Thus, the next time
a video is played, -intel thinks it has a valid buffer and crashes
when it tries to access the freed memory. Fixes a number of crashes
reported since moving to the 2.6.3 driver.
- Fixes crash on i945 with frame buffer width > 2048. DRI is disabled
on this chipset when the frame buffer exceeds this width.
(LP: #354688)
- Fixes crash on i865 where DRI is off because of patch 116
(LP: #352760)
- Fixes crash on i845 starting after 304871 was fixed
(LP: #354889)
- Fixes crash on i830 when manually disabling DRI
(LP: #347527)
-- Bryce Harrington <email address hidden> Mon, 06 Apr 2009 14:28:29 -0700
Changed in xserver-xorg-video-intel (Ubuntu): | |
status: | Incomplete → Fix Released |
vmc (vmclark) wrote : | #14 |
I cannot play any movie files - avi, vob, using the current Intel driver 2.6. If I revert to old driver everything resumes back to normal. I'm able to play all video movies. This is reported on a Ubuntu 9.04 (Jaunty).
Mu integrated Intel chip is 82865G
wilbur (wilburgr) wrote : Re: [Bug 352760] Re: [82865g] Playing video with acceleration enabled crashes Xorg | #15 |
2009/4/26 vmc <email address hidden>
> I cannot play any movie files - avi, vob, using the current Intel driver
> 2.6. If I revert to old driver everything resumes back to normal. I'm
> able to play all video movies. This is reported on a Ubuntu 9.04
> (Jaunty).
>
> Mu integrated Intel chip is 82865G
>
> --
> [82865g] Playing video with acceleration enabled crashes Xorg
> https:/
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “xserver-
>
> Bug description:
> Binary package hint: xserver-
>
> After resolving the DRI issue with the Intel 865G I have been encountering
> unworkable video problems with streaming video, slide shows and flash.
>
> As can be seen from the section of the xorg.conf file I have been trying a
> number of variations.
>
> Section "Device"
> VendorName "Intel Corporation"
> BoardName "Intel 82865G"
> Identifier "82865G Integrated Graphics Controller"
> Driver "intel"
> BusID "PCI:0:2:0"
> # Option "XvMC" "true"
> Option "DRI" "False"
> # Option "NoAccel" "True"
> # Option "AccelMethod" "UXA" # "EXA"
> Option "DPMS" "false"
> # Option "Legacy3d" "false"
> EndSection
>
> The only solution I have found so far is to use the 'Option "NoAccel"
> "True"' line and with this video will run, although very poorly, and the
> system is virtually unusable for anything else.
>
> With the 'NoAccel' line commented as above X will act exactly as though
> Ctrl+Alt+Backspace has been pressed. So far I have been unable to get UXA to
> run as it hangs the system. There are no error messages and I can find
> nothing in the logs.
>
> This is in 9.04 with all updates as of the evening of March 30, 09
>
wilbur (wilburgr) wrote : Intel 865G | #16 |
I have installed the fix as reported in:
http://
to the latest kernel 2.6.30-rc2 and run the fixmtrr.sh script. UXA now will
launch but crashes when anything is opened so it is back to EXA which runs
most video very poorly. Scrolling is about to same, choppy. I used the
xorg.conf as shown and have also tried a number of other ideas but nothing
works. The Intel 865G driver still has serious issues.
2009/4/26 vmc <email address hidden>
> I cannot play any movie files - avi, vob, using the current Intel driver
> 2.6. If I revert to old driver everything resumes back to normal. I'm
> able to play all video movies. This is reported on a Ubuntu 9.04
> (Jaunty).
>
> Mu integrated Intel chip is 82865G
>
> --
> [82865g] Playing video with acceleration enabled crashes Xorg
> https:/
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “xserver-
>
> Bug description:
> Binary package hint: xserver-
>
> After resolving the DRI issue with the Intel 865G I have been encountering
> unworkable video problems with streaming video, slide shows and flash.
>
> As can be seen from the section of the xorg.conf file I have been trying a
> number of variations.
>
> Section "Device"
> VendorName "Intel Corporation"
> BoardName "Intel 82865G"
> Identifier "82865G Integrated Graphics Controller"
> Driver "intel"
> BusID "PCI:0:2:0"
> # Option "XvMC" "true"
> Option "DRI" "False"
> # Option "NoAccel" "True"
> # Option "AccelMethod" "UXA" # "EXA"
> Option "DPMS" "false"
> # Option "Legacy3d" "false"
> EndSection
>
> The only solution I have found so far is to use the 'Option "NoAccel"
> "True"' line and with this video will run, although very poorly, and the
> system is virtually unusable for anything else.
>
> With the 'NoAccel' line commented as above X will act exactly as though
> Ctrl+Alt+Backspace has been pressed. So far I have been unable to get UXA to
> run as it hangs the system. There are no error messages and I can find
> nothing in the logs.
>
> This is in 9.04 with all updates as of the evening of March 30, 09
>
Denis Walrave (deniswalrave) wrote : | #17 |
Same problem today :
Linux osnp1197956p 2.6.28-15-server #49-Ubuntu SMP Tue Aug 18 19:30:06 UTC 2009 i686 GNU/Linux
description: Notebook
product: 8933AS3
vendor: LENOVO
version: ThinkPad R61
*-pci
product: Mobile PM965/GM965/GL960 Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 0c
width: 32 bits
clock: 33MHz
*-display:0 UNCLAIMED
bus info: pci@0000:00:02.0
width: 64 bits
clock: 33MHz
-Denis
Denis Walrave (deniswalrave) wrote : | #18 |
Parts of lspci output:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controlle
r Hub (rev 0c)
Subsystem: Lenovo Device 20b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Lenovo Device 20b5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 2296
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Kernel modules: intelfb
-Denis
Denis Walrave (deniswalrave) wrote : | #19 |
Xorg.0.log.old (tail)
Backtrace:
0: /usr/X11R6/
1: /usr/X11R6/
2: [0xb801f400]
3: /usr/lib/
4: /usr/lib/
5: /usr/lib/
6: /usr/lib/
7: /usr/lib/
8: /usr/lib/
9: /usr/X11R6/bin/X [0x80de538]
10: /usr/lib/
11: /usr/lib/
12: /usr/lib/
13: /usr/X11R6/
14: /usr/X11R6/
15: /lib/tls/
16: /usr/X11R6/bin/X [0x80717a1]
Saw signal 11. Server aborting.
(II) ThinkPad Extra Buttons: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) DualPoint Stick: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
Fatal server error:
I830EmitFlush: BEGIN_BATCH called without closing ADVANCE_BATCH
Please consult the The X.Org Foundation support
at http://
for help.
Please also check the log file at "/var/log/
(II) AIGLX: Suspending AIGLX clients for VT switch
FatalError re-entered, aborting
I830EmitFlush: BEGIN_BATCH called without closing ADVANCE_BATCH
-Denis
Thank you for reporting this issue, it helps make Ubuntu better. Confirmed.