groovy/linux-raspi: Upstream raspberrypi patchset 2020-09-16

Bug #1896436 reported by Juerg Haefliger
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux-raspi (Ubuntu)
Fix Released
Undecided
Unassigned
Groovy
Fix Released
Undecided
Unassigned

Bug Description

Upstream raspberrypi patchset 2020-09-16

   Ported from the following raspberrypi branch:
      rpi-5.8.y

from https://github.com/raspberrypi/linux.git

configs: Enable CHACHA20POLY1305=m
ARM: dts: Limit BT modem baud rate on 3B
overlays: Add adafruit18 and sainsmart18 overlays
staging/fbtft: Add support for display variants
overlays: Minor README correction
configs: Include AppArmor support
configs: Make the evdev module a built-in
ARM: dts: Add required USB power domain for XHCI
overlays: Add spi0-1cs and spi0-2cs
media: i2c: ov9281: Add support for 8 bit readout
media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
media: bcm2835-unicam: Drop WARN on uing direct cache alias
ARM: dts: bcm2835: Use the L2 non-allocating alias
configs: Enable upstream cpufreq driver for pi0/pi1
configs: Add CONFIG_SPS30=m
configs: Add I2C_HID=m
ARM: dts: bcm2708.dtsi: Don't delete the cpus node
staging: vc04_services: ISP: Fix dmabuf error check in S_CTRL
ARM: dts: bcm2711: Enable support for DDR52 eMMC
RESET_CONTROLLER needs to be activated to compile Broadcom BCM2835 clock support
overlays: Updated MCP3008 compatible strings.
configs: Add CONFIG_UEVENT_HELPER=y
staging: vc04_services: isp: Select MEDIA_CONTROLLER
staging: vc04_services: codec: Select MEDIA_CONTROLLER
staging: media: rpivid: Select MEDIA_CONTROLLER and MEDIA_CONTROLLER_REQUEST_API
media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API
configs: Restore CONFIG_CFG80211_WEXT=y
configs: Regenerate defconfigs
dt/overlays: Add PiFace Digital Device Tree Overlay
rtc: rv3028: Refresh RAM on EEPROM write
rtc: rv3028: Write BSM and TCE/TCR to EEPROM
dtoverlays: Add overlay for the PCA953x family of GPIO expanders
update rpi-display-overlay.dts pins for 5.4
configs: Add USB_GADGET=m to bcmrpi3_defconfig
staging: vc04_services: codec: Fix component enable/disable
staging: vc04_service: codec: Allow start_streaming to update the buffernum
staging: vc04_services: codec: Fix incorrect buffer cleanup
drm/vc4: Set the possible crtcs mask correctly for planes with FKMS
drm/vc4: Increase the number of planes per crtc in FKMS.
overlays: Regenerate upstream-pi4
config: Add USB gadget support to bcm2711 config
dts: bcm2711: Disable DVP by default
dtoverlays: Add the iio_hwmon driver to correct ADC issues
configs: add CONFIG_SENSORS_IIO_HWMON=m
overlays: Add maxtherm overlay for MAX6675/31855
overlays: Delete spi0-hw-cs
overlays: Fix sc16is75x overlays w.r.t. serdev
ARM: proc-v7: Force misalignment of early stmia
drm/vc4: Remove UIF from the list of modifiers returned by format_mod_supported
ARM: dts: Add UART skip-init properties for U-boot
configs: Restore missing cgroups to BCM2835-7
configs: Adding remaining crypto API modules
add CONFIG_CRYPTO_USER_API_HASH=m
bcm2835-dma: Advertise the full DMA range
ARM: dts: 2711 DMA can address 36 bits
staging: vchiq_arm: children inherit DMA config
Revert "raspberrypi-cpufreq: Only report integer pll divisor frequencies"
media: i2c: imx214: select V4L2_FWNODE
brcmfmac: Set timeout value when configuring power save

CVE References

Juerg Haefliger (juergh)
Changed in linux-raspi (Ubuntu):
status: New → Confirmed
Juerg Haefliger (juergh)
description: updated
Juerg Haefliger (juergh)
Changed in linux-raspi (Ubuntu Groovy):
status: Confirmed → Fix Committed
Revision history for this message
Launchpad Janitor (janitor) wrote :
Download full text (67.7 KiB)

This bug was fixed in the package linux-raspi - 5.8.0-1003.6

---------------
linux-raspi (5.8.0-1003.6) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1003.6 -proposed tracker (LP: #1898142)

  * Please switch default, hwe, oem kernel flavours governor to
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y , such that advanced userspace
    utilities such as game-mode can be later used to rev-up to to performance,
    or rev-down to powersave. (LP: #1885730)
    - [Config] raspi: Set the default CPU governor to ONDEMAND

  * groovy/linux-raspi: Upstream raspberrypi patchset 2020-09-16 (LP: #1896436)
    - Revert "raspberrypi-cpufreq: Only report integer pll divisor frequencies"
    - staging: vchiq_arm: children inherit DMA config
    - ARM: dts: 2711 DMA can address 36 bits
    - bcm2835-dma: Advertise the full DMA range
    - add CONFIG_CRYPTO_USER_API_HASH=m
    - configs: Adding remaining crypto API modules
    - configs: Restore missing cgroups to BCM2835-7
    - ARM: dts: Add UART skip-init properties for U-boot
    - drm/vc4: Remove UIF from the list of modifiers returned by
      format_mod_supported
    - ARM: proc-v7: Force misalignment of early stmia
    - overlays: Fix sc16is75x overlays w.r.t. serdev
    - overlays: Delete spi0-hw-cs
    - overlays: Add maxtherm overlay for MAX6675/31855
    - configs: add CONFIG_SENSORS_IIO_HWMON=m
    - dtoverlays: Add the iio_hwmon driver to correct ADC issues
    - dts: bcm2711: Disable DVP by default
    - config: Add USB gadget support to bcm2711 config
    - overlays: Regenerate upstream-pi4
    - drm/vc4: Increase the number of planes per crtc in FKMS.
    - drm/vc4: Set the possible crtcs mask correctly for planes with FKMS
    - staging: vc04_services: codec: Fix incorrect buffer cleanup
    - staging: vc04_service: codec: Allow start_streaming to update the buffernum
    - staging: vc04_services: codec: Fix component enable/disable
    - configs: Add USB_GADGET=m to bcmrpi3_defconfig
    - update rpi-display-overlay.dts pins for 5.4
    - dtoverlays: Add overlay for the PCA953x family of GPIO expanders
    - rtc: rv3028: Write BSM and TCE/TCR to EEPROM
    - rtc: rv3028: Refresh RAM on EEPROM write
    - dt/overlays: Add PiFace Digital Device Tree Overlay
    - configs: Regenerate defconfigs
    - configs: Restore CONFIG_CFG80211_WEXT=y
    - media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API
    - staging: media: rpivid: Select MEDIA_CONTROLLER and
      MEDIA_CONTROLLER_REQUEST_API
    - staging: vc04_services: codec: Select MEDIA_CONTROLLER
    - staging: vc04_services: isp: Select MEDIA_CONTROLLER
    - configs: Add CONFIG_UEVENT_HELPER=y
    - overlays: Updated MCP3008 compatible strings.
    - RESET_CONTROLLER needs to be activated to compile Broadcom BCM2835 clock
      support
    - ARM: dts: bcm2711: Enable support for DDR52 eMMC
    - staging: vc04_services: ISP: Fix dmabuf error check in S_CTRL
    - ARM: dts: bcm2708.dtsi: Don't delete the cpus node
    - configs: Add I2C_HID=m
    - configs: Add CONFIG_SPS30=m
    - configs: Enable upstream cpufreq driver for pi0/pi1
    - ARM: dts: bcm2835: Use the L2 non-allocating alias
    - media: bcm2835-unicam:...

Changed in linux-raspi (Ubuntu Groovy):
status: Fix Committed → Fix Released
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.