NetworkManager renderer broken on NM version 1.15.2 or later (Ubuntu 19.04 Disco)

[Trent Lloyd]

[Impact]
Netplan users who use the NetworkManager backend (ie. all desktop users);
only when NetworkManager 1.15.2 is in use (disco and higher).

[Test case]
1) Apply any currently working configuration.
2) Run 'netplan apply'
3) Verify that the files generated in /run/NetworkManager/system-connections/ include a ".nmconnection" suffix.

[Regression potential]
None; this additional extension allows support for NetworkManager 1.15.2 and has additional effect on earlier version of NetworkManager: files are parsed despite any possible file suffix.

---

NetworkManager 1.15.2 or later (as included first in Ubuntu 19.04 Disco Dingo) now requires that files in /{etc,run}/NetworkManager/system-connections end in the suffix '.nmconnection' as per the following commit:
https://github.com/NetworkManager/NetworkManager/commit/648c256b9014198aac388097e410999c68c4b452

NetPlan writes files as /run/NetworkManager/system-connections/{name} without any suffix. On Ubuntu 19.04 these files are ignored and the configuration is not applied.

If you rename the files to end in '.nmconnection' then you can see the interface configuration loaded by NetworkManager.

root@optane:/run/NetworkManager/system-connections# ls
 netplan-eno1 virbr0.nmconnection 'Wired connection 1.nmconnection' 'Wired connection 2.nmconnection'

root@optane:/run/NetworkManager/system-connections# cat /etc/netplan/03-netcfg.yaml
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
  version: 2
  renderer: NetworkManager
  ethernets:
    eno1:
      addresses: [10.48.134.22/25]
      gateway4: 10.48.134.1
      nameservers:
        addresses: [10.48.134.6]

[Sebastien Bacher (seb128)]

the report also shows that we currently have no autopkgtest or such blocking n-m to migrate when the netplans/n-m integration stops working

[Nivedita Singhvi (niveditasinghvi)]

Reproduced on current Disco.

[Trent Lloyd (lathiat)]

draft patch (not well tested yet), but I am having trouble because several of the tests (unrelated to this patch, they fail with the current git master) fail on disco, but not bionic.

Some of the tests fail when you run them a second time without opening a new terminal (even on bionic), I've addressed that with a PR here:
https://bugs.launchpad.net/netplan/+bug/1817660

The disco-specific failures seem to be largely ordering bugs where the output is re-ordered for some reason. I didn't dig into that yet. May be a better task for cyphermox

[Ubuntu Foundations Team Bug Bot (crichton)]

The attachment "lp1817655.patch" seems to be a patch. If it isn't, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team.

[This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.]

[Launchpad Janitor (janitor)]

This bug was fixed in the package netplan.io - 0.96-0ubuntu2

---------------
netplan.io (0.96-0ubuntu2) disco; urgency=medium

  * d/p/0001-Automatically-skip-tests-when-wifi-is-clearly-unavai.patch:
    Update wifi tests to try to make them more reliable.
  * debian/tests/control: explicilty mark wifi tests flaky.

 -- Mathieu Trudel-Lapierre <email address hidden> Thu, 14 Mar 2019 14:11:47 -0400

[Timo Aaltonen (tjaalton)]

Hello Trent, or anyone else affected,

Accepted netplan.io into cosmic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.10.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-cosmic to verification-done-cosmic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-cosmic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Timo Aaltonen (tjaalton)]

Hello Trent, or anyone else affected,

Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Steve Langasek (vorlon)]

Hello Trent, or anyone else affected,

Accepted netplan.io into cosmic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.10.2 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-cosmic to verification-done-cosmic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-cosmic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Steve Langasek (vorlon)]

Hello Trent, or anyone else affected,

Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.2 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Mathieu Trudel-Lapierre (cyphermox)]

Verification-done for bionic:

Changing the renderer to NetworkManager still leads to a working system with live connections, even with the NetworkManager files now having a .nmconnection extension:

ubuntu@just-boa:~$ dpkg -l netplan.io | grep ii
ii netplan.io 0.96-0ubuntu0.18.04.2 amd64 YAML network configuration abstraction for various backends
ubuntu@just-boa:~$ networkctl
IDX LINK TYPE OPERATIONAL SETUP
  1 lo loopback carrier unmanaged
  2 enp2s1 ether routable unmanaged
  3 enp2s2 ether degraded unmanaged

3 links listed.
ubuntu@just-boa:~$ nmcli
enp2s1: connected to netplan-enp2s1
        "Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (QEMU Virtual Machine)"
        ethernet (8139cp), 52:54:00:BC:B0:18, hw, mtu 1500
        ip4 default, ip6 default
        inet4 10.3.21.29/20
        route4 10.3.16.0/20
        route4 0.0.0.0/0
        inet6 2001:470:b171::5/48
        inet6 fe80::5054:ff:febc:b018/64
        route6 ff00::/8
        route6 2001:470:b171::/48
        route6 fe80::/64
        route6 ::/0

enp2s2: connected to netplan-enp2s2
        "Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (QEMU Virtual Machine)"
        ethernet (8139cp), 52:54:00:59:A3:52, hw, mtu 1500
        inet4 169.254.41.37/16
        route4 224.0.0.0/4
        route4 169.254.0.0/16
        inet6 fe80::5054:ff:fe59:a352/64
        route6 ff00::/8
        route6 fe80::/64

lo: unmanaged
        "lo"
        loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536

DNS configuration:
        servers: 10.3.21.25 149.56.20.136
        interface: enp2s1

Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.

Consult nmcli(1) and nmcli-examples(5) manual pages for complete usage details.
ubuntu@just-boa:~$ sudo ls -l /run/NetworkManager/system-connections/
total 8
-rw------- 1 root root 353 Apr 2 16:18 netplan-enp2s1.nmconnection
-rw------- 1 root root 168 Apr 2 16:18 netplan-enp2s2.nmconnection

[Mathieu Trudel-Lapierre (cyphermox)]

Verification-done for cosmic:

With the changes and NetworkManager connection files now having a .nmconnection, the network still comes up and the system is still reachable, with the renderer value in netplan yaml changed to 'NetworkManager'.

ubuntu@civil-eft:~$ dpkg -l netplan.io | grep ii
ii netplan.io 0.96-0ubuntu0.18.10.2 amd64 YAML network configuration abstraction for various backends
ubuntu@civil-eft:~$ networkctl
IDX LINK TYPE OPERATIONAL SETUP
  1 lo loopback carrier unmanaged
  2 ens4 ether routable unmanaged

2 links listed.
ubuntu@civil-eft:~$ nmcli | cat
ens4: connected to netplan-ens4
 "Red Hat Virtio"
 ethernet (virtio_net), 52:54:00:02:E0:E0, hw, mtu 1500
 ip4 default, ip6 default
 inet4 10.3.21.28/20
 route4 10.3.16.0/20
 route4 0.0.0.0/0
 inet6 2001:470:b171::4/48
 inet6 fe80::5054:ff:fe02:e0e0/64
 route6 2001:470:b171::/48
 route6 ff00::/8
 route6 fe80::/64
 route6 ::/0

lo: unmanaged
 "lo"
 loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536

DNS configuration:
 servers: 149.56.20.136
 domains: cloud.cyphermox.net
 interface: ens4

 servers: 2001:470:b171::1
 domains: cloud.cyphermox.net
 interface: ens4

Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.

Consult nmcli(1) and nmcli-examples(5) manual pages for complete usage details.
ubuntu@civil-eft:~$ sudo ls -l /run/NetworkManager/system-connections/
total 4
-rw------- 1 root root 360 Apr 2 16:18 netplan-ens4.nmconnection
ubuntu@civil-eft:~$

[Steve Langasek (vorlon)]

Hello Trent, or anyone else affected,

Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Mathieu Trudel-Lapierre (cyphermox)]

This is still verification-done for bionic; re-upload was to skip some failing tunnel tests due to a difference in kernel behavior.

[Launchpad Janitor (janitor)]

This bug was fixed in the package netplan.io - 0.96-0ubuntu0.18.10.2

---------------
netplan.io (0.96-0ubuntu0.18.10.2) cosmic; urgency=medium

  * d/p/0001-Partially-revert-the-change-for-enabling-systemd-net.patch:
    Partially revert changes to networkd jobs ordering: leave systemd-networkd
    enabled in multi-user.target instead of network-online.target, as in some
    minimal setups there might be no job requiring network-online.target,
    whereas the natural target to reach for booting is multi-user.target.
    (LP: #1821867)

netplan.io (0.96-0ubuntu0.18.10.1) cosmic; urgency=medium

  * Backport netplan.io 0.96 to 18.10.
  * debian/patches/glib_changes.patch: Patch tests to work again on older GLib.
  * debian/control: adjust Depends for cosmic / re-add nplan package.

netplan.io (0.96-0ubuntu1) disco; urgency=medium

  * New upstream release 0.96.
    - Moved netplan-wpa@ services to earlier at boot (LP: #1819014)
    - Restart services when unconfiguring (LP: #1811868)
    - Use the .nmconnection extension for NM keyfiles (LP: #1817655)
    - Fixed integration tests runner to correctly report failures
    - Enforce integrity for use-routes in networkd backend.
    - Ensure terminal state at end of test (LP: #1817660)
    - Various small test fixes.
    - Fix typos in documentation.
  * debian/control: Update Maintainer for ubuntu upload.

netplan.io (0.95-2) unstable; urgency=medium

  * Set Priority to optional (Closes: #920327).

netplan.io (0.95-1) unstable; urgency=medium

  * New upstream release.
  * Update autopkgtests from the upstream.
  * Add debian/watch following GitHub releases.
  * Add Homepage (Closes: #917233).

netplan.io (0.95) disco; urgency=medium

  * New upstream release:
    - Added support for WPA Enterprise / 802.1x authentication (LP: #1739578)
    - Added support for setting up IP tunnels; supporting the types: ipip,
      gretap, VTI, ISATAP (NetworkManager only), sit, gre, ipip6 and ip6ip6.
      + Fixes sit (ipv6) tunnels using Hurricane Electric (LP: #1799487)
    - Add support to override networkd UseMTU setting (LP: #1807273)
    - Generate output files in dependency order
    - Refactored unit and integration tests, along with various cleanups.
    - Add DHCP overrides to control route usage and default metric for DHCP
      routes. (LP: #1776228)
    - Mitigate against bad matching on devices behind bonds then they share
      the same MAC from a physical interface. (LP: #1804861)
    - Added snapcraft.yaml.

netplan.io (0.90.1) disco; urgency=medium

  * Do not assume /etc/network exists in postinst, as netbase 5.5 no longer
    creates it.
  * netplan/cli/commands/ip.py: fix a flake.

netplan.io (0.90) disco; urgency=medium

  * New upstream release:
    - build: fixes for building on RPM-based distros
    - build: code prettiness changes (make indentation consistent)
    - Fix device name-changes detection (LP: #1770082)
    - Add support for IPv6 Privacy Extensions (LP: #1750392)
    - Add dhcp{4,6}-overrides to control DNS, NTP, hostname updates via DHCP
      (LP: #1759014)
    - Clarify MAC and MTU setting requirements (LP: #1800668)
    - Various documentation fixes (LP: #1800669)
    -...

[Brian Murray (brian-murray)]

The verification of the Stable Release Update for netplan.io has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions.

[Steve Langasek (vorlon)]

A possible SRU regression has been reported against netplan.io 0.96-0ubuntu0.18.10.2 in LP: #1825206. This version has been rolled back to -proposed while the investigation is ongoing.

[Brian Murray (brian-murray)]

Hello Trent, or anyone else affected,

Accepted netplan.io into cosmic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.10.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-cosmic to verification-done-cosmic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-cosmic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Brian Murray (brian-murray)]

Hello Trent, or anyone else affected,

Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.4 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Mathieu Trudel-Lapierre (cyphermox)]

Confirmed this is still unchanged for bionic and cosmic SRUs:

netplan.io/0.96-0ubuntu0.18.04.4
netplan.io/0.96-0ubuntu0.18.10.3

NetworkManager renderer works as expected; files are being written with the .nmconnection suffix and work correctly.

[Launchpad Janitor (janitor)]

This bug was fixed in the package netplan.io - 0.96-0ubuntu0.18.04.4

---------------
netplan.io (0.96-0ubuntu0.18.04.4) bionic; urgency=medium

  * debian/patches/git_revert_explicit_renderer_def_ebc212a.patch: revert
    commit ebc212a: make renderer values explicit at the end of each parsing
    pass; it breaks "default" renderer behavior when multiple files may set
    a global renderer and expect the last to take effect globally.
    (LP: #1825206)
  * debian/patches/git_reorg_netdef_validation_181b583.patch: correct the
    fallout from the above change: validate netdefs in a single pass at the
    very end of parsing, once we know which is the applicable renderer. This
    makes sure tunnels get validated correctly.

netplan.io (0.96-0ubuntu0.18.04.3) bionic; urgency=medium

  * debian/patches/disable-networkd-tunnels-ipip-gre.patch: disable IPIP and
    GRE tunnel tests; those appear to be broken because neither the kernel nor
    networkd bring up the device automatically as in other releases.

netplan.io (0.96-0ubuntu0.18.04.2) bionic; urgency=medium

  * d/p/0001-Partially-revert-the-change-for-enabling-systemd-net.patch:
    Partially revert changes to networkd jobs ordering: leave systemd-networkd
    enabled in multi-user.target instead of network-online.target, as in some
    minimal setups there might be no job requiring network-online.target,
    whereas the natural target to reach for booting is multi-user.target.
    (LP: #1821867)

netplan.io (0.96-0ubuntu0.18.04.1) bionic; urgency=medium

  * Backport netplan.io 0.96 to 18.04.
  * debian/patches/glib_changes.patch: Patch tests to work again on older GLib.
  * debian/control: adjust Depends for bionic / re-add nplan package.

netplan.io (0.96-0ubuntu1) disco; urgency=medium

  * New upstream release 0.96.
    - Moved netplan-wpa@ services to earlier at boot (LP: #1819014)
    - Restart services when unconfiguring (LP: #1811868)
    - Use the .nmconnection extension for NM keyfiles (LP: #1817655)
    - Fixed integration tests runner to correctly report failures
    - Enforce integrity for use-routes in networkd backend.
    - Ensure terminal state at end of test (LP: #1817660)
    - Various small test fixes.
    - Fix typos in documentation.
  * debian/control: Update Maintainer for ubuntu upload.

netplan.io (0.95-2) unstable; urgency=medium

  * Set Priority to optional (Closes: #920327).

netplan.io (0.95-1) unstable; urgency=medium

  * New upstream release.
  * Update autopkgtests from the upstream.
  * Add debian/watch following GitHub releases.
  * Add Homepage (Closes: #917233).

netplan.io (0.95) disco; urgency=medium

  * New upstream release:
    - Added support for WPA Enterprise / 802.1x authentication (LP: #1739578)
    - Added support for setting up IP tunnels; supporting the types: ipip,
      gretap, VTI, ISATAP (NetworkManager only), sit, gre, ipip6 and ip6ip6.
      + Fixes sit (ipv6) tunnels using Hurricane Electric (LP: #1799487)
    - Add support to override networkd UseMTU setting (LP: #1807273)
    - Generate output files in dependency order
    - Refactored unit and integration tests, along with various cleanups.
    - Add DHCP overrides to control ...

[Launchpad Janitor (janitor)]

This bug was fixed in the package netplan.io - 0.96-0ubuntu0.18.10.3

---------------
netplan.io (0.96-0ubuntu0.18.10.3) cosmic; urgency=medium

  * debian/patches/git_revert_explicit_renderer_def_ebc212a.patch: revert
    commit ebc212a: make renderer values explicit at the end of each parsing
    pass; it breaks "default" renderer behavior when multiple files may set
    a global renderer and expect the last to take effect globally.
    (LP: #1825206)
  * debian/patches/git_reorg_netdef_validation_181b583.patch: correct the
    fallout from the above change: validate netdefs in a single pass at the
    very end of parsing, once we know which is the applicable renderer. This
    makes sure tunnels get validated correctly.

netplan.io (0.96-0ubuntu0.18.10.2) cosmic; urgency=medium

  * d/p/0001-Partially-revert-the-change-for-enabling-systemd-net.patch:
    Partially revert changes to networkd jobs ordering: leave systemd-networkd
    enabled in multi-user.target instead of network-online.target, as in some
    minimal setups there might be no job requiring network-online.target,
    whereas the natural target to reach for booting is multi-user.target.
    (LP: #1821867)

netplan.io (0.96-0ubuntu0.18.10.1) cosmic; urgency=medium

  * Backport netplan.io 0.96 to 18.10.
  * debian/patches/glib_changes.patch: Patch tests to work again on older GLib.
  * debian/control: adjust Depends for cosmic / re-add nplan package.

netplan.io (0.96-0ubuntu1) disco; urgency=medium

  * New upstream release 0.96.
    - Moved netplan-wpa@ services to earlier at boot (LP: #1819014)
    - Restart services when unconfiguring (LP: #1811868)
    - Use the .nmconnection extension for NM keyfiles (LP: #1817655)
    - Fixed integration tests runner to correctly report failures
    - Enforce integrity for use-routes in networkd backend.
    - Ensure terminal state at end of test (LP: #1817660)
    - Various small test fixes.
    - Fix typos in documentation.
  * debian/control: Update Maintainer for ubuntu upload.

netplan.io (0.95-2) unstable; urgency=medium

  * Set Priority to optional (Closes: #920327).

netplan.io (0.95-1) unstable; urgency=medium

  * New upstream release.
  * Update autopkgtests from the upstream.
  * Add debian/watch following GitHub releases.
  * Add Homepage (Closes: #917233).

netplan.io (0.95) disco; urgency=medium

  * New upstream release:
    - Added support for WPA Enterprise / 802.1x authentication (LP: #1739578)
    - Added support for setting up IP tunnels; supporting the types: ipip,
      gretap, VTI, ISATAP (NetworkManager only), sit, gre, ipip6 and ip6ip6.
      + Fixes sit (ipv6) tunnels using Hurricane Electric (LP: #1799487)
    - Add support to override networkd UseMTU setting (LP: #1807273)
    - Generate output files in dependency order
    - Refactored unit and integration tests, along with various cleanups.
    - Add DHCP overrides to control route usage and default metric for DHCP
      routes. (LP: #1776228)
    - Mitigate against bad matching on devices behind bonds then they share
      the same MAC from a physical interface. (LP: #1804861)
    - Added snapcraft.yaml.

netplan.io (0.90.1) disco; urgency=medium

  * Do ...