iscsid autostarts on all servers when it has nothing to do

[Steve Langasek]

[Impact]

 * Service is running uselessly which is consuming a few cycles/memory as
   well as raising general concerns e.g. on minimizing attack surface of
   a system.

 * This is also the only service in a default server install which pulls in the network-online.target, which has implications for boot ordering and speed in various configurations.

 * Fix by switching to socket activation

[Test Case]

 * After installing open-iscsi (which is default installed) the service
   iscsid is running which is mostly useless
   - this is a bit critical, as we don't want to stop a running service.
   - so you have two cases
   1. uninstall the package before upgrade; then install the new version.
      should be service off, socket on
   2. upgrade install, should have service (still) on, socket enabled.
   3. after 2. reboot should be service off, socket on
 * Also ensure that iscsid.service should come up as needed
   # should be off
   $ systemctl status iscsid.service iscsid.socket
   $ iscsiadm -m discovery -t sendtargets -p 127.0.0.1
   # should be enabled now
   $ systemctl status iscsid.service iscsid.socket

[Regression Potential]

 * We were discussing if we shall SRU this. First of all the change should
   work as in the new version, abstract sockets are not super new.
 * We were concerned that one would have e.g. scripts and other upper
   level code that does like:
     if service-is-not-running; then break; else do what you should do
   This would give up before socket-triggering it which might be too much
   to SRU. On a Upgrade to a newer release such minor adaptions are usual,
   but for SRUs?
   But in any config using it it will run, and as slangasek outlined " I
   think anyone checking for the running status of an open-iscsi service,
   on a system that does not have any iscsi targets configured, is writing
   buggy code and that should not be catered to in the face of the
   significant impact this bug has on all other users of Ubuntu Server."
 * But also we don't stop the service on upgrade (for safety of the data),
   so you'd have four different Bionics
   a) old iscsid.service runnign by default
   b) upgraded, but not rebooted iscsid.service still running
   c) upgraded, rebooted iscid.service disabled,
      iscsid.socket running
   d) new deploy after this (e.g. new cloud image) iscid.service disabled,
      iscsid.socket running
   a+b are similar as well as c+d.
 * If anyone strictly needs the old behavior it is a config, so one can
   "systemctl enable iscsid.service" and is done.
 * OTOH in our discussion it was agreed that the upgrade regression we fix
   outweighs the potential regression.

[Other Info]
 * The SRU of this change caused a regression described in bug 1802354.

---

In bionic, the open-iscsi systemd unit has the following guards to keep it from running on systems with no iscsi targets configured:

# Must have some pre-defined targets to login to
ConditionDirectoryNotEmpty=|/etc/iscsi/nodes
# or have a session to use via iscsid
ConditionDirectoryNotEmpty=|/sys/class/iscsi_session

However, iscsid starts from a separate unit and does not include this check. Thus, iscsid starts on every Ubuntu Server install, whether or not it has anything to do.

We should replicate these unit conditionals to the iscsid unit, to ensure the daemon doesn't run (consuming memory, and slowing boot) when not needed.

Related bugs:
 * bug 1630946: ubuntu-server depends on open-iscsi and runs iscsid
 * bug 1802354: iscsid does not run if there are only initramfs initiated targets

[Christian Ehrhardt  (paelzer)]

Status of a clean install in a VM and/or Container, so testable rather trivial:

$ systemctl status iscsid open-iscsi
● iscsid.service - iSCSI initiator daemon (iscsid)
   Loaded: loaded (/lib/systemd/system/iscsid.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2018-05-23 10:52:11 UTC; 7min ago
     Docs: man:iscsid(8)
  Process: 751 ExecStart=/sbin/iscsid (code=exited, status=0/SUCCESS)
  Process: 721 ExecStartPre=/lib/open-iscsi/startup-checks.sh (code=exited, status=0/SUCCESS)
 Main PID: 759 (iscsid)
    Tasks: 2 (limit: 548)
   CGroup: /system.slice/iscsid.service
           ├─754 /sbin/iscsid
           └─759 /sbin/iscsid

May 23 10:52:11 b1 systemd[1]: Starting iSCSI initiator daemon (iscsid)...
May 23 10:52:11 b1 systemd[1]: iscsid.service: Failed to parse PID from file /run/iscsid.pid: Invalid argument
May 23 10:52:11 b1 iscsid[754]: iSCSI daemon with pid=759 started!
May 23 10:52:11 b1 systemd[1]: Started iSCSI initiator daemon (iscsid).

● open-iscsi.service - Login to default iSCSI targets
   Loaded: loaded (/lib/systemd/system/open-iscsi.service; enabled; vendor preset: enabled)
   Active: inactive (dead)
Condition: start condition failed at Wed 2018-05-23 10:52:11 UTC; 7min ago
           ├─ ConditionDirectoryNotEmpty=|/etc/iscsi/nodes was not met
           └─ ConditionDirectoryNotEmpty=|/sys/class/iscsi_session was not met
     Docs: man:iscsiadm(8)
           man:iscsid(8)

It is important to note that these are not "the same" service twice.
both belong to the same package:
dpkg -S /lib/systemd/system/open-iscsi.service /lib/systemd/system/iscsid.service
open-iscsi: /lib/systemd/system/open-iscsi.service
open-iscsi: /lib/systemd/system/iscsid.service

But the two are doing rather different things:
open-iscsi.service: logs into iSCSI targets if some are configured (Condition stops it from doing so) - this is more a one-shot configure-devices and not a real service
iscsi.service: the basic service daemone, required by the service above

I think here we might learn from Fedora:
Default is:
[root@fedora ~]# systemctl status iscsid.socket iscsid.service
● iscsid.socket - Open-iSCSI iscsid Socket
   Loaded: loaded (/usr/lib/systemd/system/iscsid.socket; enabled; vendor preset: disabled)
   Active: active (listening) since Wed 2018-05-23 11:26:37 UTC; 9s ago
     Docs: man:iscsid(8)
           man:iscsiadm(8)
   Listen: @ISCSIADM_ABSTRACT_NAMESPACE (Stream)

May 23 11:26:37 fedora systemd[1]: Listening on Open-iSCSI iscsid Socket.

● iscsid.service - Open-iSCSI
   Loaded: loaded (/usr/lib/systemd/system/iscsid.service; disabled; vendor preset: disabled)
   Active: inactive (dead)
     Docs: man:iscsid(8)
           man:iscsiadm(8)

May 23 11:26:09 fedora systemd[1]: iscsid.service: Failed to reset devices.list: Operation not permitted
May 23 11:26:09 fedora systemd[1]: Starting Open-iSCSI...

And the related config in /etc/iscsid.conf says:
# Use socket activation, but try to make sure the socket units are listening
iscsid.startup = /bin/systemctl start iscsid.socket iscsiuio.socket
(We don't have the uio, but you get the idea - initially only ensure the socket runs.)

The socket then does:
# syste...

[Christian Ehrhardt  (paelzer)]

Most basic tests cross check on Fedora:
First I tried a safe no-op
  $ iscsiadm -m discovery -t sendtargets -p 127.0.0.1
  This is working fine on fedora to activate the service

Then I tried on the fedora setup if the cmd we call would activate it.
  $ /sbin/iscsiadm -m node --loginall=automatic
    iscsiadm: No records found
And the service is not activated.
But that is ok, I really had no config and /lib/systemd/system/open-iscsi.service explicitly defined RC=21 as ok for just this reason.

If to configure something:
$ targetname="iqn.2016-11.foo.com:target.1.iscsi"
$ truncate --size 100M backingfile1
$ tgtadm --lld iscsi --op new --mode target --tid 1 -T "${targetname}"
$ tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
$ portal="127.0.0.1:3260"
$ iscsiadm --mode discovery --type sendtargets --portal 127.0.0.1
$ iscsiadm --mode node --targetname "${targetname}" --portal 127.0.0.1:3260 --login
$ iscsiadm --mode node --targetname "${targetname}" --portal "${portal}" --logout

This should now be usable

[Christian Ehrhardt  (paelzer)]

Trying a hacky POC:

1. define iscsid.socket
$ cat > /lib/systemd/system/iscsid.socket << EOF
[Unit]
Description=Open-iSCSI iscsid Socket
Documentation=man:iscsid(8) man:iscsiadm(8)

[Socket]
ListenStream=@ISCSIADM_ABSTRACT_NAMESPACE

[Install]
WantedBy=sockets.target
EOF
$ systemctl enable iscsid.socket

2. remove some entries in /lib/systemd/system/open-iscsi.service
- remove iscsid from Wants=
- Remove the line ExecStartPre=/bin/systemctl --quiet is-active iscsid.service

3. disable and reload all files
$ systemctl disable iscsid
$ systemctl daemon-reload

Note: we also have still /etc/init.d/iscsid, but as long as there is a .service it doesn't matter.

=> ok - with that on a restart it doesn't start anymore on Ubuntu

Lets see if it will auto-start ...

[Christian Ehrhardt  (paelzer)]

Test 1:
iscsiadm -m discovery -t sendtargets -p 127.0.0.1
worked to activate it as needed

Test 2:
/sbin/iscsiadm -m node --loginall=automatic
Not activating it, but that is fine if nothing is defined

Test 3:
- define something with tgt, and configure it
Note: remember to load iscsi_tcp in the host if you are in a container
- after that /etc/iscsi/nodes/iqn.2016-11.foo.com\:target.1.iscsi/127.0.0.1\,3260\,1/default exists
Well it still counts as "no-records found" but that is fine commands are called fine
And if I add a iscsid depending call is in there (added as exec pre) it works to enable it.

Overall I think this could work ...

[Christian Ehrhardt  (paelzer)]

Interesting, this worked just fine without the iscsid.conf entry as in Fedora:
  iscsid.startup = /bin/systemctl start iscsid.socket

I need to check the code for what this is used.

[Christian Ehrhardt  (paelzer)]

Ok, this is the code path that tries to connect.
It has a fallback to run this command.
I think we would want anyway that this is not started in a random context, but from the socket/service.
The following connect will then pick and start via the socket.

[Christian Ehrhardt  (paelzer)]

I have a test branch and build
+ * make iscsid socket activated to only activate it as-needed (LP: #1755858)
+ - debian/open-iscsi.socket: systemd socket file for iscsid
+ - debian/open-iscsi.service: do not start or check iscsid.service
+ - debian/rules: install and enable iscsid.socket
+ - debian/patches/iscid-conf-use-systemd.socket-patch: default to the socket

Building in ppa [1] now.
It is not yet up for final review, but feel free to take a look at [2]

I Won't have time for it anymore for a bit, some tests on the ppa (upgrades and how they affect it as well as new installs - since it is there by default the latter meant purge+ppa+install).

[1]: https://launchpad.net/~ci-train-ppa-service/+archive/ubuntu/3268 for further tests.
[2]: https://code.launchpad.net/~paelzer/ubuntu/+source/open-iscsi/+git/open-iscsi/+merge/346739

[Christian Ehrhardt  (paelzer)]

Fortunately we are so early in the cycle that I'd say if reviews and tests seem good we can change it. And if on any image/maas/cloud tests we break things we didn't expect there is time enough to revert it before cosmic is entering any Freeze.

[Steve Langasek (vorlon)]

On Wed, May 23, 2018 at 01:58:05PM -0000,  Christian Ehrhardt  wrote:
> Fortunately we are so early in the cycle that I'd say if reviews and
> tests seem good we can change it. And if on any image/maas/cloud tests
> we break things we didn't expect there is time enough to revert it
> before cosmic is entering any Freeze.

I think we should be concerned about SRUing this change to bionic as well.
iscsid.service declares Wants=network-online.target, which slows down the
boot in cases where the system for whatever reason can't confirm right away
that the network is up.

[Christian Ehrhardt  (paelzer)]

Lets get it right in Cosmic also to see what we come up with and if you then say this should be safe for an SRU I'll follow your guidance :-)

[Christian Ehrhardt  (paelzer)]

FYI: on the MP I'm iterating on different degrees of not-fun I have with dh_* in regard to control them to do exactly what I need for open-iscsi.

[Christian Ehrhardt  (paelzer)]

MP is reviewed and accepted, new version pushed to Cosmic as https://launchpad.net/ubuntu/+source/open-iscsi/2.0.874-5ubuntu3

I ran and adapted the tests, but lets see how migration works if there are any surprises.

[Christian Ehrhardt  (paelzer)]

Also reported to Debian and linked up their bug.
It should help them just as much.

And if they accept it maintenance/merges will be easier, while OTOH if they find issues we can fix them in our Delta - so either way it is good to make it known there.

[Christian Ehrhardt  (paelzer)]

This worked in https://bileto.ubuntu.com/#/ticket/3268 when tested before (ppa now abandoned due to upload taking the version).
I also had amd64 tests running locally (due to that the fix to the tests that I had added)

But on the final migration it stumbles over it on LP Infra.
So it might be a race?!?
Example:
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-cosmic/cosmic/amd64/o/open-iscsi/20180530_111813_16285@/log.gz

I need to check what is going on there other than local.
Starting a new run locally ...

[Christian Ehrhardt  (paelzer)]

To be a bit faster (in case it is a race) than last time running with 4CPU and 2G memory this time.
$ autopkgtest --apt-upgrade --shell-fail --no-built-binaries --apt-pocket=proposed=src:open-iscsi open-iscsi_2.0.874-5ubuntu3.dsc -- qemu --qemu-options='-cpu host' --cpus 4 --ram-size=2048 ~/autopkgtest-cosmic-amd64.img

Ok, I can at least reproduce now ...

Eventually it is easier than I thought.
We have an intentional no-op (that can fail and already is on an || /bin/true).
This might emit to stderr and that breaks the test.
I logged in and all the status it wanted to test after this command is actually good.

Now that Bileto tests work again I'll respin a fix and test on LP infra before the fix-upload to the archive.

Lets see if it stumbles over more after this, to have at least only one fixup-upload.

[Christian Ehrhardt  (paelzer)]

The hit in "testsuite" is more complex, as it does not reproduce for me.
From the log:
======================================================================
ERROR: test_tgt_boot (__main__.CloudImageTest)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/tmp/autopkgtest.BEvlMr/build.15A/src/debian/tests/test-open-iscsi.py", line 274, in test_tgt_boot
    subprocess.check_call(cmd)
  File "/usr/lib/python2.7/subprocess.py", line 190, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['/tmp/autopkgtest.BEvlMr/build.15A/src/debian/tests/tgt-boot-test', '-v', '--netdev=user,net=10.1.1.0/24,host=10.1.1.2,dns=10.1.1.4,dnssearch=example.com', '--disk=/tmp/tmpin5Hu3/output-disk.img,serial=output-disk', '--user-data-add=/tmp/tmpin5Hu3/user-data', '/tmp/autopkgtest.BEvlMr/build.15A/src/debian/tests/cosmic.d/disk.img', '/tmp/autopkgtest.BEvlMr/build.15A/src/debian/tests/cosmic.d/kernel', '/tmp/autopkgtest.BEvlMr/build.15A/src/debian/tests/cosmic.d/initrd']' returned non-zero exit status 124

This more seems than it might have timed out, also this is not only not reproducible (locally) but also only affecting x86_64.
I'll have to wait for the LP Infra rerun on Bileto on this.

[Christian Ehrhardt  (paelzer)]

This now worked a few times locally (4/4) but never on Infra (3/3).

I first thought it would be a timeout for
  qemu-system-x86_64: terminating on signal 15 from pid 25607 (timeout)
  xkvm returned 124 in 3600s
But that is only because it boots into emergency console and hangs there:
  You are in emergency mode. After logging in, type "journalctl -xb" to view

While locally (autopkgtest in VM) it boots&tests fine
  xkvm returned 0 in 200s
  cleaning up tgt mount tgt-boot-test-4mbUyK
  ok
  Ran 3 tests in 230.082s

The other arches are good, because the cloud image based test is only run on amd64.
All other tests run everywhere and are good.

Here a log of one of the many good local runs: http://paste.ubuntu.com/p/cvMMb9GDTV/

[Christian Ehrhardt  (paelzer)]

Ok, the forth was a charm - so on LP Infra it seems to be flaky which is a separate issue.
This is the working log from the ppa: https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-cosmic-ci-train-ppa-service-3279/cosmic/amd64/o/open-iscsi/20180531_060452_bd5ba@/log.gz

That said the real issue is fixed in the package I will upload.

[Launchpad Janitor (janitor)]

This bug was fixed in the package open-iscsi - 2.0.874-5ubuntu4

---------------
open-iscsi (2.0.874-5ubuntu4) cosmic; urgency=medium

  * debian/tests/install: ignore the potential stderr of the probing command
    that is meant to activate iscsid indirectly via the socket.

open-iscsi (2.0.874-5ubuntu3) cosmic; urgency=medium

  * make iscsid socket activated to only activate it as-needed (LP: #1755858)
    - debian/iscsid.socket: systemd socket file for iscsid
    - debian/open-iscsi.service: do not start or check iscsid.service
    - debian/rules: install and enable iscsid.socket
    - debian/patches/iscid-conf-use-systemd.socket-patch: default to the socket
    - debian/open-iscsi.postinst:
      + run restart logic only if service is running on upgrade
      + drop no more reachable upgrade path that affects iscsid
      + disable iscsid.service on upgrade
      + handle iscsid.socket to be started if the service is not running yet
    - debian/tests/install: fix tests to work with socket activation

 -- Christian Ehrhardt <email address hidden> Wed, 30 May 2018 15:42:12 +0200

[Christian Ehrhardt  (paelzer)]

Done for Cosmic.

Steve has mentioned he'd like to see an SRU of this to Bionic, but I think the change carries too much regression potential for an SRU. Please feel free to discuss.
To make it clear I'm not working on Bionic, I'll set Won't Fix for now.

[Scott Moser (smoser)]

Nominated this for xenial based on bug 1651497.

[Steve Langasek (vorlon)]

To be explicit, I don't think that the risk of regression here is such that we should not SRU this to bionic. I think anyone checking for the running status of an open-iscsi service, on a system that does not have any iscsi targets configured, is writing buggy code and that should not be catered to in the face of the significant impact this bug has on all other users of Ubuntu Server.

[Scott Moser (smoser)]

I prepared merge proposals for both xenial and bionic.
Also:
 - tested autopkgtest on both xenial and bionic
 - uploaded to [my ppa](https://launchpad.net/~smoser/+archive/ubuntu/ppa) for xenial and bionic
 - uploaded bionic to SRU queue

[Christian Ehrhardt  (paelzer)]

FYI - Smoser and I started to prep SRU work for this.
But once we agree on the content I'd be really happy if someone who was affected by the upgrade issue (and therefore has a valid and "real" iscsi setup) would test from the PPA before shoving that into the SRU queue.

I subscribed Chris Gregan who I was told has a reproducer being affected by this (I hope that is correct) - if so once we have a PPA up would you be able to verify it?

[Dan Streetman (ddstreet)]

@smoser, @paelzer, your bionic upload has been sitting for ~10 days in the upload queue, and it's blocking upload for bug 1791108. Can you shake the sru trees to get that upload approved, or can you ask for it to be rejected so i can upload for the other bug?

[Steve Langasek (vorlon)]

Hello Steve, or anyone else affected,

Accepted open-iscsi into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/open-iscsi/2.0.874-5ubuntu2.2 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

[Dan Streetman (ddstreet)]

@cgregan are you able to verify the bionic-proposed pkg?

[Chris Gregan (cgregan)]

We do not typically pull from proposed. I would need to look into the
process. The usual trouble is that once you turn on proposed, you

On Mon, Oct 1, 2018 at 10:47 AM Dan Streetman <email address hidden>
wrote:

> @cgregan are you able to verify the bionic-proposed pkg?
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1755858
>
> Title:
> iscsid autostarts on all servers when it has nothing to do
>
> To manage notifications about this bug go to:
>
> https://bugs.launchpad.net/ubuntu/+source/open-iscsi/+bug/1755858/+subscriptions
>

--
Chris Gregan
Quality Assurance Manager
Field Engineering/CPE
<email address hidden>

[Chris Gregan (cgregan)]

We do not usually do this type of validation as there is no Proposed pocket MAAS image or cloud image. An image would need to be build for just this package. The only alternative is to manually upgrade the images after they are applied to the nodes/pods/and instances.

[Scott Moser (smoser)]

@Chris,
For what its worth, there is a process to build maas images with -proposed
enabled at
 https://gist.github.com/smoser/8a34b1713badb643dee3a25e5cf134b8

[Scott Moser (smoser)]

Here is my verification of bionic proposed.
It should be considered in cooperation with open-iscsi dep8 tests
which do a iscsi root boot:
  http://autopkgtest.ubuntu.com/packages/o/open-iscsi/bionic/amd64

Below is sufficient for the 'Test Case' section of the SRU Template,
it would be nice to see an actual user of open-iscsi test this.

### Setup
###
Launched a fresh bionic image of 20180927.
Notes:
 * to avoid noise below I have done 'apt-get autoremove' (LP: #1721035)
 * The following is 'connect-abstract-socket.py' which is used below.
   #!/usr/bin/python3
   from socket import socket, AF_UNIX, SOCK_STREAM
   import sys
   socket(AF_UNIX, SOCK_STREAM).connect(('\0' + sys.argv[1]))
   print("Connected to @%s" % sys.argv[1])

### fresh boot of image.
$ cat /etc/cloud/build.info
build_name: server
serial: 20180927
$ dpkg-query --show open-iscsi
open-iscsi 2.0.874-5ubuntu2.1

$ systemctl status --no-pager --full iscsid.service iscsid.socket open-iscsi.service
● iscsid.service - iSCSI initiator daemon (iscsid)
   Loaded: loaded (/lib/systemd/system/iscsid.service; enabled; vendor preset: enabled)
   Active: active (running) since Mon 2018-10-01 19:57:30 UTC; 3min 12s ago
     Docs: man:iscsid(8)
  Process: 764 ExecStart=/sbin/iscsid (code=exited, status=0/SUCCESS)
  Process: 728 ExecStartPre=/lib/open-iscsi/startup-checks.sh (code=exited, status=0/SUCCESS)
 Main PID: 768 (iscsid)
    Tasks: 2 (limit: 2362)
   CGroup: /system.slice/iscsid.service
           ├─767 /sbin/iscsid
           └─768 /sbin/iscsid

Oct 01 19:57:30 bionic-20181001-195627 systemd[1]: Starting iSCSI initiator daemon (iscsid)...
Oct 01 19:57:32 bionic-20181001-195627 iscsid[767]: iSCSI daemon with pid=768 started!
Oct 01 19:57:30 bionic-20181001-195627 systemd[1]: Started iSCSI initiator daemon (iscsid).

$ systemctl status open-iscsi.service --full --no-pager
● open-iscsi.service - Login to default iSCSI targets
   Loaded: loaded (/lib/systemd/system/open-iscsi.service; enabled; vendor preset: enabled)
   Active: inactive (dead)
Condition: start condition failed at Mon 2018-10-01 19:57:30 UTC; 4min 13s ago
           ├─ ConditionDirectoryNotEmpty=|/etc/iscsi/nodes was not met
           └─ ConditionDirectoryNotEmpty=|/sys/class/iscsi_session was not met
     Docs: man:iscsiadm(8)
           man:iscsid(8)

### Enable proposed
$ line=$(awk '$1 == "deb" && $2 ~ /ubuntu.com/ {
  printf("%s %s %s-proposed main universe\n", $1, $2, rel); exit(0) };
  ' "rel=$rel" /etc/apt/sources.list)
$ echo "$line" | sudo tee /etc/apt/sources.list.d/proposed.list
deb http://nova.clouds.archive.ubuntu.com/ubuntu/ bionic-proposed main universe

$ sudo apt-get update -q

$ apt-cache policy open-iscsi
open-iscsi:
  Installed: 2.0.874-5ubuntu2.1
  Candidate: 2.0.874-5ubuntu2.2
  Version table:
     2.0.874-5ubuntu2.2 500
        500 http://nova.clouds.archive.ubuntu.com/ubuntu bionic-proposed/main amd64 Packages
 *** 2.0.874-5ubuntu2.1 500
        500 http://nova.clouds.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages
        100 /var/lib/dpkg/status
     2.0.874-5ubuntu2 500
        500 http://nova.clouds.archive.ubuntu.com/ubuntu bionic/main amd64 Packages

### Test Case...

[Launchpad Janitor (janitor)]

This bug was fixed in the package open-iscsi - 2.0.874-5ubuntu2.2

---------------
open-iscsi (2.0.874-5ubuntu2.2) bionic; urgency=medium

  * make iscsid socket activated to only activate it as-needed (LP: #1755858)
    - debian/iscsid.socket: systemd socket file for iscsid
    - debian/open-iscsi.service: do not start or check iscsid.service
    - debian/rules: install and enable iscsid.socket
    - debian/patches/iscid-conf-use-systemd.socket-patch: default to the socket
    - debian/open-iscsi.postinst:
      + run restart logic only if service is running on upgrade
      + drop no more reachable upgrade path that affects iscsid
      + disable iscsid.service on upgrade
      + handle iscsid.socket to be started if the service is not running yet
    - debian/tests/install: fix tests to work with socket activation

 -- Scott Moser <email address hidden> Fri, 07 Sep 2018 09:24:22 -0400

[Steve Langasek (vorlon)]

The verification of the Stable Release Update for open-iscsi has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions.