[jaunty] autopkgtest gutsy openoffice.org: erroneous package!

Bug #151573 reported by Ian Jackson autopkgtest
10
Affects Status Importance Assigned to Milestone
openoffice.org (Ubuntu)
Fix Released
Low
Chris Cheney

Bug Description

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

 affects /ubuntu/openoffice.org
 importance high
 # version 1:2.3.0-1ubuntu2

 Test executed for: gutsy source openoffice.org
 Outcome: erroneous package!
  blame: arg:tmp/openoffice.org/src/openoffice.org_2.3.0-1ubuntu2.dsc dsc:openoffice.org
  badpkg: rules binary failed with exit code 2
  quitting: erroneous package: rules binary failed with exit code 2

  erroneous package!

This message is automatically generated by the autopkgtest package
testing system. You are receiving it because:
 The test results appear to indicate a problem with the package
 and reports for package maintainers for gutsy are being directed to
 <email address hidden>

The top and tail of the test log, which is intended to be sufficient
to diagnose most failures, can be found below. However, in case this
is not sufficient, a complete log can be found along with output
files, saved temporary files, and so on, at:
 http://autopkgtest.ubuntu.com/autopkgtest-output/

The test environment is an amd64 Xen guest with limited amounts of
memory. The relevant dependencies are installed for each test but
very few other packages. Most autopkgtest reports are FTBFS problems.

Please forgive this bug report if the problem is due to archive skew;
in that case you've just been unlucky with the timing. Feel free to
close the bug if the skew has been fixed, or will be fixed soon.

If you have any questions about this service please contact me at:
 Ian Jackson <email address hidden>

Regards,
Ian

- -8<-
++++++ fetching http://archive.ubuntu.com/ubuntu/dists/gutsy/main/source/Sources.gz ++++++
++++++ selecting ++++++
selected openoffice.org (age <never-yet>, score 7198550)

Package: openoffice.org
Binary: ttf-opensymbol, openoffice.org-qa-tools, openoffice.org-l10n-in, openoffice.org-report-builder, python-uno, broffice.org, openoffice.org-style-human, openoffice.org-impress, openoffice.org-dev, openoffice.org-filter-binfilter, openoffice.org-core, openoffice.org-gnome, openoffice.org-base, openoffice.org-style-tango, openoffice.org-style-hicontrast, openoffice.org-dev-doc, openoffice.org-calc, openoffice.org-officebean, openoffice.org-kde, openoffice.org-l10n-za, openoffice.org-style-industrial, libmythes-dev, openoffice.org-dtd-officedocument1.0, openoffice.org-headless, mozilla-openoffice.org, openoffice.org-sdbc-postgresql, openoffice.org-style-crystal, openoffice.org-common, openoffice.org-l10n-en-us, openoffice.org-evolution, openoffice.org-qa-api-tests, openoffice.org-gtk, openoffice.org-math, libuno-cil, openoffice.org-writer, openoffice.org-filter-mobiledev, openoffice.org-draw, openoffice.org-java-common, openoffice.org, openoffice.org-style-default, openoffice.org-style-andromeda
Version: 1:2.3.0-1ubuntu2
Priority: optional
Section: editors
Maintainer: Ubuntu Core Developers <email address hidden>
Original-Maintainer: Debian OpenOffice Team <email address hidden>
Build-Depends: lsb-release, bzip2, bison (>= 1:1.875a-1) [i386 powerpc sparc amd64 lpia ppc64], flex [i386 powerpc sparc amd64 lpia ppc64], libpam0g-dev [i386 powerpc sparc amd64 lpia ppc64], libxaw7-dev [i386 powerpc sparc amd64 lpia ppc64], unzip [i386 powerpc sparc amd64 lpia ppc64], zip [i386 powerpc sparc amd64 lpia ppc64], autoconf [i386 powerpc sparc amd64 lpia ppc64], sharutils [i386 powerpc sparc amd64 lpia ppc64], pkg-config [i386 powerpc sparc amd64 lpia ppc64], xutils [i386 powerpc sparc amd64 lpia ppc64], libfontconfig1-dev [i386 powerpc sparc amd64 lpia ppc64], binutils (>= 2.14.90.0.6-3) [sparc], libc6 (>= 2.3.2-1) [powerpc], zlib1g-dev [i386 powerpc sparc amd64 lpia ppc64], libfreetype6-dev [i386 powerpc sparc amd64 lpia ppc64], libx11-dev [i386 powerpc sparc amd64 lpia ppc64], libsm-dev [i386 powerpc sparc amd64 lpia ppc64], libxt-dev [i386 powerpc sparc amd64 lpia ppc64], libxext-dev [i386 powerpc sparc amd64 lpia ppc64], libice-dev [i386 powerpc sparc amd64 lpia ppc64], libsane-dev [i386 powerpc sparc amd64 lpia ppc64], libxrender-dev [i386 powerpc sparc amd64 lpia ppc64], libcupsys2-dev [i386 powerpc sparc amd64 lpia ppc64], libarchive-zip-perl [i386 powerpc sparc amd64 lpia ppc64], libstartup-notification0-dev [i386 powerpc sparc amd64 lpia ppc64], libpng12-dev [i386 powerpc sparc amd64 lpia ppc64], libjpeg62-dev [i386 powerpc sparc amd64 lpia ppc64], libxml2-dev [i386 powerpc sparc amd64 lpia ppc64], libldap2-dev [i386 powerpc sparc amd64 lpia ppc64], libexpat1-dev [i386 powerpc sparc amd64 lpia ppc64], libgnomevfs2-dev [i386 powerpc sparc amd64 lpia ppc64], fastjar [i386 powerpc sparc amd64 lpia ppc64], libsndfile1-dev [i386 powerpc sparc amd64 lpia ppc64], xsltproc [i386 powerpc sparc amd64 lpia ppc64], imagemagick [i386 powerpc sparc amd64 lpia ppc64], netpbm [i386 powerpc sparc amd64 lpia ppc64], fdupes [i386 powerpc sparc amd64 lpia ppc64], xml-core [i386 powerpc sparc amd64 lpia ppc64], libxkbfile-dev [i386 powerpc sparc amd64 lpia ppc64], libxinerama-dev [i386 powerpc sparc amd64 lpia ppc64], x11proto-render-dev [i386 powerpc sparc amd64 lpia ppc64], unixodbc-dev (>= 2.2.11) [i386 powerpc sparc amd64 lpia ppc64], libxml-parser-perl [i386 powerpc sparc amd64 lpia ppc64], gperf [i386 powerpc sparc amd64 lpia ppc64], libpq-dev [i386 powerpc sparc amd64 lpia ppc64], translate-toolkit, libcurl4-gnutls-dev [i386 powerpc sparc amd64 lpia ppc64], libdb4.5-dev [i386 powerpc sparc amd64 lpia ppc64], python-central (>= 0.5) [i386 powerpc sparc amd64 lpia ppc64], debhelper (>= 5.0.37.2), python-dev (>= 2.4) [i386 powerpc sparc amd64 lpia ppc64], java-gcj-compat-dev (>= 1.0.56) [i386 powerpc sparc amd64 lpia ppc64], ant (>= 1.6.5) [i386 powerpc sparc amd64 lpia ppc64], libxt-java (>= 0.20050823) [i386 powerpc sparc amd64 lpia ppc64], libxerces2-java [i386 powerpc sparc amd64 lpia ppc64], libxalan2-java (>= 2.6.0-1) [i386 powerpc sparc amd64 lpia ppc64], firefox-dev [i386 powerpc sparc amd64 lpia ppc64], dmake (>= 1:4.7) [i386 powerpc sparc amd64 lpia ppc64], mono-mcs (>= 1.2.3) [i386 amd64], mono-gmcs (>= 1.2.3) [i386 amd64], libmono-dev (>= 1.2.3) [i386 amd64], mono-utils (>= 1.2.3) [i386 amd64], cli-common-dev (>= 0.4.4) [i386 amd64], libhunspell-dev (>= 1.1.5-2) [i386 powerpc sparc amd64 lpia ppc64], libboost-dev [i386 powerpc sparc amd64 lpia ppc64], libvigraimpex-dev [i386 powerpc sparc amd64 lpia ppc64], portaudio19-dev [i386 powerpc sparc amd64 lpia ppc64], libwpd8-dev (>= 0.8.3-3) [i386 powerpc sparc amd64 lpia ppc64], libwps-dev [i386 powerpc sparc amd64 lpia ppc64], libwpg-dev [i386 powerpc sparc amd64 lpia ppc64], libsvg-dev [i386 powerpc sparc amd64 lpia ppc64], libicu-dev [i386 powerpc sparc amd64 lpia ppc64], libxslt1-dev [i386 powerpc sparc amd64 lpia ppc64], libcairo2-dev [i386 powerpc sparc amd64 lpia ppc64], libglitz-glx1-dev [i386 powerpc sparc amd64 lpia ppc64], kdelibs4-dev (>= 4:3.4.3-2) [i386 powerpc sparc amd64 lpia ppc64], libhsqldb-java (>= 1.8.0.8-1) [i386 powerpc sparc amd64 lpia ppc64], bsh (>= 2.0b4-1) [i386 powerpc sparc amd64 lpia ppc64], libdbus-glib-1-dev (>= 0.60) [i386 powerpc sparc amd64 lpia ppc64], libgstreamer-plugins-base0.10-dev [i386 powerpc sparc amd64 lpia ppc64], libneon26-dev [i386 powerpc sparc amd64 lpia ppc64], libgtk2.0-dev (>= 2.10) [i386 powerpc sparc amd64 lpia ppc64]
Build-Conflicts: libcairo2 (= 1.4.8-1), libxul-dev (= 1.8.0.13~pre070720-0etch1), gjdoc (= 0.7.8-2), libc6-dev (= 2.6.1-3) [i386 amd64], libc6-dev (= 2.6.1-4) [i386 amd64]
Architecture: any
Standards-Version: 3.7.2
Format: 1.0
Directory: pool/main/o/openoffice.org
Files:
 5e83e365a262448b466f80397b89aaa0 6389 openoffice.org_2.3.0-1ubuntu2.dsc
 fd952b5b3fd66dd75e23c27ce80bb5b7 264195892 openoffice.org_2.3.0.orig.tar.gz
 3cdf9b97f2b24ca82cb07613b0513243 90873527 openoffice.org_2.3.0-1ubuntu2.diff.gz
Uploaders: Chris Halls <email address hidden>, Rene Engelhard <email address hidden>
Python-Version: current
Vcs-Bzr: http://bazaar.launchpad.net/~openoffice-pkgs/openoffice/2.3-gutsy
Vcs-Svn: svn://svn.gnome.org/svn/ooo-build/trunk

++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/o/openoffice.org/openoffice.org_2.3.0-1ubuntu2.dsc ++++++
++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/o/openoffice.org/openoffice.org_2.3.0.orig.tar.gz ++++++
++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/o/openoffice.org/openoffice.org_2.3.0-1ubuntu2.diff.gz ++++++
++++++ starting test ++++++
+ adt-run --tmp-dir tmp/openoffice.org/tmp --output-dir tmp/openoffice.org/out --log-file tmp/openoffice.org/log --summary tmp/_summary --built-binaries-filter=__ --source tmp/openoffice.org/src/openoffice.org_2.3.0-1ubuntu2.dsc --- adt-virt-xenlvm --userv --distro=gutsy --
adt-run: trace: ** init
adt-run: trace: ** start
adt-run: trace: $ vserver: adt-virt-xenlvm --userv --distro=gutsy --
File descriptor 6 left open
File descriptor 7 left open
adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ starting
adt-run: trace: ** open, scratch=None
File descriptor 6 left open
File descriptor 11 left open
File descriptor 6 left open
File descriptor 11 left open
adt-run: trace: * initialising
adt-run: trace: * no key generation needed
adt-run: trace: * reset
adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ builds ...
adt-run: trace: @@@@@@@@@@@@@@@@@@@@ dsc dsc0
adt-run: trace: * publish
adt-run: trace: $ ftparchive: sh -ec <SCRIPT> x tmp/openoffice.org/tmp/binaries /home/iwj/.autopkgtest/gpg
adt-run: trace: $ apt-key: sh -ec <SCRIPT>
OK
Get:1 file: Release.gpg [189B]
Get:2 http://archive.ubuntu.com gutsy Release.gpg [191B]
Get:3 file: Release [724B]
Get:4 http://archive.ubuntu.com gutsy Release [65.9kB]
Ign file: Packages
Get:5 http://archive.ubuntu.com gutsy/main Packages [1074kB]
Get:6 http://archive.ubuntu.com gutsy/restricted Packages [7146B]
Get:7 http://archive.ubuntu.com gutsy/universe Packages [3999kB]
Get:8 http://archive.ubuntu.com gutsy/multiverse Packages [152kB]
Fetched 5299kB in 3s (1600kB/s)
Reading package lists...
adt-run: trace: * publish reinstall checking...
adt-run: trace: * publish install...
adt-run: trace: * publish done
adt-run: trace: $ dsc0: python -c <SCRIPT>
adt-run: trace: $ dsc0-extract: sh -ec <SCRIPT> x /root/adt-downtmp/dsc0-build/tmpdir /root/adt-downtmp/dsc0/openoffice.org_2.3.0-1ubuntu2.dsc
+ spec=/root/adt-downtmp/dsc0/openoffice.org_2.3.0-1ubuntu2.dsc
+ pwd
+ origpwd=/root/adt-downtmp/dsc0-build
+ cd /root/adt-downtmp/dsc0-build
+ chown adtxenu .
+ TMPDIR=/root/adt-downtmp/dsc0-build/tmpdir
+ rm -rf -- /root/adt-downtmp/dsc0-build/tmpdir
+ export TMPDIR
+ su adtxenu -c mkdir -- "$TMPDIR"
+ spec=/root/adt-downtmp/dsc0/openoffice.org_2.3.0-1ubuntu2.dsc origpwd=/root/adt-downtmp/dsc0-build su adtxenu -c
\t\t\tdpkg-source -x $spec
\t\t\t
gpg: new configuration file `/home/adtxenu/.gnupg/gpg.conf' created
gpg: WARNING: options in `/home/adtxenu/.gnupg/gpg.conf' are not yet active during this run
gpg: Signature made Tue Sep 25 00:14:14 2007 UTC using DSA key ID 8B1AE688
gpg: Can't check signature: public key not found
dpkg-source: extracting openoffice.org in openoffice.org-2.3.0
dpkg-source: unpacking openoffice.org_2.3.0.orig.tar.gz
dpkg-source: applying /root/adt-downtmp/dsc0/openoffice.org_2.3.0-1ubuntu2.diff.gz
+ cd openoffice.org-2.3.0/.
+ pwd
+ set +e
+ test -f debian/tests/control
+ echo 1
adt-run: trace: * <dsc:dsc0> build needed for binaries
adt-run: trace: $ dsc0: python -c <SCRIPT>
\rExtracting templates from packages: 6%\rExtracting templates from packages: 12%\rExtracting templates from packages: 18%\rExtracting templates from packages: 25%\rExtracting templates from packages: 31%\rExtracting templates from packages: 37%\rExtracting templates from packages: 44%\rExtracting templates from packages: 50%\rExtracting templates from packages: 56%\rExtracting templates from packages: 63%\rExtracting templates from packages: 69%\rExtracting templates from packages: 75%\rExtracting templates from packages: 82%\rExtracting templates from packages: 88%\rExtracting templates from packages: 94%\rExtracting templates from packages: 100%
/dev/mem: mmap: Bad address
adt-run: trace: $ dsc0-build: sh -ec <SCRIPT> x /root/adt-downtmp/dsc0-build/tmpdir /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0
+ TMPDIR=/root/adt-downtmp/dsc0-build/tmpdir
+ rm -rf -- /root/adt-downtmp/dsc0-build/tmpdir
+ export TMPDIR
+ su adtxenu -c mkdir -- "$TMPDIR"
+ cd /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0
+ dpkg-checkbuilddeps
+ su adtxenu -c debian/rules build
dh_testdir
# Make sure needed scripts are executable
set -e;\\
\tfor FILE in debian/scripts/installoverrides \\
\t\t debian/scripts/move-if-change \\
\t\t debian/scripts/cleandupes \\
\t\t debian/scripts/fix_image_rgb \\
\t\t ooo-build/configure \\
\t\t ooo-build/bin/[a-z]* ;\\
\tdo \\
\t chmod 755 $FILE ;\\
\tdone
mkdir -p debian/stampdir
# uudecode files, omit GSI files
set -e; \\
\tfor uu in \\
\t `find . -name *.uu` \\
\t ; do \\
\t case "$uu" in ooo-build/src/GSI*) continue ; esac ; \\
\t orig="`echo "$uu" |sed -e 's#.uu$##'`" ;\\
\t if [ ! -s $orig ]; then \\
\t uudecode -o $orig $uu ; \\
\t touch -r $uu $orig ; \\
\t fi ; \\
\tdone
# Make convenience link
if [ ! -L build ]; then ln -s ooo-build/build/OOG680_m5 build ; fi
# Make sure we have /proc mounted - otherwise idlc will fail later.
test -r /proc/version
# hrmpf. Empty in ooo-build and patch does not give them to us but
# configure need them. Create them...
touch ooo-build/distro-configs/Win32.conf.in
touch ooo-build/distro-configs/Solaris.conf.in
cd ooo-build ; \\
\t\tPATH=/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/debian/usr/bin:/usr/lib/jvm/java-gcj/bin:$PATH LD_LIBRARY_PATH= ../ooo-build/configure --disable-post-install-scripts --with-tag=OOG680_m5 --with-distro=UbuntuGutsy --with-vendor='Debian and Ubuntu' --enable-package-directories --with-installed-ooo-dirname=openoffice --mandir=/usr/share/man --with-docdir=/usr/share/doc/openoffice.org --with-lang="en-US" --with-build-version="openoffice.org-core 1:2.3.0-1ubuntu2, `LANG=C date`" --disable-strip --enable-atkbridge --enable-lockdown --enable-openxml --with-drink=coffee --disable-access --with-binsuffix=no --enable-gcjaot --with-jdk-home=/usr/lib/jvm/java-gcj --with-system-xt\t --with-system-xerces --with-system-xalan --with-system-mozilla=firefox --enable-mono --with-system-hunspell --with-system-boost --with-system-vigra --with-system-portaudio --with-system-libwpd --with-system-libwps --with-system-libwpg --with-system-libsvg --with-system-icu --with-system-libxslt --with-system-cairo --enable-binfilter --with-system-hsqldb --with-system-beanshell --with-system-neon --enable-symbols=SMALL --with-num-cpus=1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for perl... /usr/bin/perl
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for FOO_COMMON... yes
found OOG680_m5, using /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/patches/src680/apply
checking for master workspace name ... OOG680
checking for directory where to download sources ... /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/src
checking for distribution name... UbuntuGutsy
checking for vendor name based on the distribution name... Debian
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking security/pam_appl.h usability... yes
checking security/pam_appl.h presence... yes
checking for security/pam_appl.h... yes
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for autoconf... yes
checking for flex... yes
checking for bison... yes
checking for ccache... no
checking for widget sets... checking for FOO_GTK... yes
- --enable-gtk --enable-kde
checking for broken aliases... ok
checking for Open Clip Art Library... no
checking for DejaVu Fonts... no
checking for GNU cp... cp
checking for GNU patch... patch
checking for GNU tar... tar
checking for favourite drink... coffee
checking for ooo-version... 2.3
checking for binsuffix...
checking for requested localizations... en-US
checking for insufficient help localizations...
checking whether to enable Mono bindings... yes
checking whether to build the binfilter... yes
checking whether to build the odk stuff... yes
checking whether to use prebuilt unowinreg.dll... yes
checking whether to enable graphite support... no
checking whether to enable Access import... no
checking whether to enable debugging code... product
configure: creating ./config.status
config.status: creating download
config.status: creating scratch/place
config.status: creating intltool-extract
config.status: creating intltool-merge
config.status: creating intltool-update
config.status: creating Makefile
config.status: creating bin/setup
config.status: creating bin/Makefile
config.status: creating desktop/Makefile
config.status: creating desktop/16x16/Makefile
config.status: creating desktop/22x22/Makefile
config.status: creating desktop/24x24/Makefile
config.status: creating desktop/32x32/Makefile
config.status: creating desktop/48x48/Makefile
config.status: creating desktop/scalable/Makefile
config.status: creating distro-configs/Makefile
config.status: creating distro-configs/Ark.conf
config.status: creating distro-configs/Ark64.conf
config.status: creating distro-configs/Common.conf
config.status: creating distro-configs/CommonLinux.conf
config.status: creating distro-configs/CommonWin32.conf
config.status: creating distro-configs/DroplineGNOME.conf
config.status: creating distro-configs/DroplineGNOME64.conf
config.status: creating distro-configs/Debian.conf
config.status: creating distro-configs/DebianEtch.conf
config.status: creating distro-configs/DebianSarge.conf
config.status: creating distro-configs/Ubuntu.conf
config.status: creating distro-configs/UbuntuL10n.conf
config.status: creating distro-configs/Ubuntu64.conf
config.status: creating distro-configs/UbuntuDapper.conf
config.status: creating distro-configs/UbuntuDapper64.conf
config.status: creating distro-configs/UbuntuEdgy.conf
config.status: creating distro-configs/UbuntuEdgy64.conf
config.status: creating distro-configs/UbuntuFeisty.conf
config.status: creating distro-configs/UbuntuFeisty64.conf
config.status: creating distro-configs/UbuntuGutsy.conf
config.status: creating distro-configs/UbuntuGutsy64.conf
config.status: creating distro-configs/SUSE.conf
config.status: creating distro-configs/SUSE-PPC.conf
config.status: creating distro-configs/SUSE-reduced.conf
config.status: creating distro-configs/SUSE-9.1.conf
config.status: creating distro-configs/SUSE-9.2.conf
config.status: creating distro-configs/SUSE-9.3.conf
config.status: creating distro-configs/SUSE-10.0.conf
config.status: creating distro-configs/SUSE-10.1.conf
config.status: creating distro-configs/SUSE-10.2.conf
config.status: creating distro-configs/SUSE-10.3.conf
config.status: creating distro-configs/Mandriva.conf
config.status: creating distro-configs/Mandriva64.conf
config.status: creating distro-configs/NovellWin32.conf
config.status: creating distro-configs/NovellWin32ISO.conf
config.status: creating distro-configs/Gentoo.conf
config.status: creating distro-configs/QiLinux.conf
config.status: creating distro-configs/Frugalware.conf
config.status: creating distro-configs/translate-org-za-linux.conf
config.status: creating distro-configs/translate-org-za-win32.conf
config.status: creating distro-configs/rpl2.conf
config.status: creating distro-configs/rpl2-64.conf
config.status: creating distro-configs/Pardus.conf
config.status: creating distro-configs/Win32.conf
config.status: creating distro-configs/Solaris.conf
config.status: creating etc/Makefile
config.status: creating patches/apply.pl
config.status: creating patches/Makefile
config.status: creating patches/cairo/Makefile
config.status: creating patches/evo2/Makefile
config.status: creating patches/gstreamer/Makefile
config.status: creating patches/vba/Makefile
config.status: creating patches/mono/Makefile
config.status: creating patches/ooxml/Makefile
config.status: creating patches/postgresql/Makefile
config.status: creating patches/scsolver/Makefile
config.status: creating patches/src680/Makefile
config.status: creating patches/64bit/Makefile
config.status: creating po/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/mono-ooo.pc
config.status: creating stamp/Makefile
config.status: creating templates/Makefile
config.status: creating man/Makefile
config.status: creating www/Makefile
config.status: creating www/images/Makefile
config.status: creating www/tinder-scripts/Makefile
config.status: executing depfiles commands

Building openoffice
\ttag: OOG680_m5
\tapply rules: /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/patches/src680/apply
\tbuild dir: /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/build/OOG680_m5
\ttools dir: /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build
\tsrc package dir: /root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/src
\tdistro: UbuntuGutsy
\twidget sets: gtk kde
\topenclipart: no
\tmono bindings:\t yes
\tmdbtools/access: no
\tjava: yes
\tooo-install-dir: openoffice
\tccache: no
\ticecream: no
\tcairo:\t\t yes
\tbuild type:\t product build
\tdownload mirror: http://go-oo.org/packages

To build run:
\t./download
\tmake
\tbin/ooinstall <path-to-install>

\tThis is trunk - the unstable branch for post-2.2 development.
\tIf you want to build the stable OOo, use:
\t\tooo-build-2-0-4\t branch for 2.0.4
\t\tooo-build-2-1 branch for 2.1
\t\tooo-build-2-2 branch for 2.2

touch ooo-build/config.status
dh_testdir
cd ooo-build ; PATH=/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/debian/usr/bin:/usr/lib/jvm/java-gcj/bin:$PATH LD_LIBRARY_PATH= DEFAULT_TO_ENGLISH_FOR_PACKING=1 /usr/bin/make
make[1]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build'
 /bin/bash ./config.status
config.status: creating download
config.status: creating scratch/place
config.status: creating intltool-extract
config.status: creating intltool-merge
config.status: creating intltool-update
config.status: creating Makefile
config.status: creating bin/setup
config.status: creating bin/Makefile
config.status: creating desktop/Makefile
config.status: creating desktop/16x16/Makefile
config.status: creating desktop/22x22/Makefile
config.status: creating desktop/24x24/Makefile
config.status: creating desktop/32x32/Makefile
config.status: creating desktop/48x48/Makefile
config.status: creating desktop/scalable/Makefile
config.status: creating distro-configs/Makefile
config.status: creating distro-configs/Ark.conf
config.status: creating distro-configs/Ark64.conf
config.status: creating distro-configs/Common.conf
config.status: creating distro-configs/CommonLinux.conf
config.status: creating distro-configs/CommonWin32.conf
config.status: creating distro-configs/DroplineGNOME.conf
config.status: creating distro-configs/DroplineGNOME64.conf
config.status: creating distro-configs/Debian.conf
config.status: creating distro-configs/DebianEtch.conf
config.status: creating distro-configs/DebianSarge.conf
config.status: creating distro-configs/Ubuntu.conf
config.status: creating distro-configs/UbuntuL10n.conf
config.status: creating distro-configs/Ubuntu64.conf
config.status: creating distro-configs/UbuntuDapper.conf
config.status: creating distro-configs/UbuntuDapper64.conf
config.status: creating distro-configs/UbuntuEdgy.conf
config.status: creating distro-configs/UbuntuEdgy64.conf
config.status: creating distro-configs/UbuntuFeisty.conf
config.status: creating distro-configs/UbuntuFeisty64.conf
config.status: creating distro-configs/UbuntuGutsy.conf
config.status: creating distro-configs/UbuntuGutsy64.conf
config.status: creating distro-configs/SUSE.conf
config.status: creating distro-configs/SUSE-PPC.conf
config.status: creating distro-configs/SUSE-reduced.conf
config.status: creating distro-configs/SUSE-9.1.conf
config.status: creating distro-configs/SUSE-9.2.conf
config.status: creating distro-configs/SUSE-9.3.conf
config.status: creating distro-configs/SUSE-10.0.conf
config.status: creating distro-configs/SUSE-10.1.conf
config.status: creating distro-configs/SUSE-10.2.conf
config.status: creating distro-configs/SUSE-10.3.conf
config.status: creating distro-configs/Mandriva.conf
config.status: creating distro-configs/Mandriva64.conf
config.status: creating distro-configs/NovellWin32.conf
config.status: creating distro-configs/NovellWin32ISO.conf
config.status: creating distro-configs/Gentoo.conf
config.status: creating distro-configs/QiLinux.conf
config.status: creating distro-configs/Frugalware.conf
config.status: creating distro-configs/translate-org-za-linux.conf
config.status: creating distro-configs/translate-org-za-win32.conf
config.status: creating distro-configs/rpl2.conf
config.status: creating distro-configs/rpl2-64.conf
config.status: creating distro-configs/Pardus.conf
config.status: creating distro-configs/Win32.conf
config.status: creating distro-configs/Solaris.conf
config.status: creating etc/Makefile
config.status: creating patches/apply.pl
config.status: creating patches/Makefile
config.status: creating patches/cairo/Makefile
config.status: creating patches/evo2/Makefile
config.status: creating patches/gstreamer/Makefile
config.status: creating patches/vba/Makefile
config.status: creating patches/mono/Makefile
config.status: creating patches/ooxml/Makefile
config.status: creating patches/postgresql/Makefile
config.status: creating patches/scsolver/Makefile
config.status: creating patches/src680/Makefile
config.status: creating patches/64bit/Makefile
config.status: creating po/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/mono-ooo.pc
config.status: creating stamp/Makefile
config.status: creating templates/Makefile
config.status: creating man/Makefile
config.status: creating www/Makefile
config.status: creating www/images/Makefile
config.status: creating www/tinder-scripts/Makefile
config.status: executing depfiles commands
make[1]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build'
make[1]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build'
Making all in po
make[2]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/po'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/po'
Making all in desktop
make[2]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop'
Making all in 16x16
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/16x16'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/16x16'
Making all in 22x22
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/22x22'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/22x22'
Making all in 24x24
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/24x24'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/24x24'
Making all in 32x32
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/32x32'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/32x32'
Making all in 48x48
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/48x48'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/48x48'
Making all in scalable
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/scalable'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop/scalable'
make[3]: Entering directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/root/adt-downtmp/dsc0-build/openoffice.org-2.3.0/ooo-build/desktop'
../intltool-merge ../po base.desktop.in.in base.desktop.in -d -u -c ../po/.intltool-merge-cache
Generating and caching the translation database
Merging translations into base.desktop.in.
sed -e "s|\\@OOO_BINSUFFIX\\@||" \\
\t -e "s|\\@STARTUPNOTIFY\\@|@STARTUPNOTIFY@|" \\
\t -e "s|\\@ADD_OPENXML_PRESENTATION_MIME\\@|;application/vnd.ms-powerpoint.slideshow.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.slideshow;application/vnd.ms-powerpoint.presentation.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.presentation;application/vnd.ms-powerpoint.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.template|" \\
\t -e "s|\\@ADD_OPENXML_SPREADSHEET_MIME\\@|;application/vnd.ms-excel.sheet.binary.macroEnabled.12;application/vnd.ms-excel.sheet.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.sheet;application/vnd.ms-excel.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.template|" \\
\t -e "s|\\@ADD_OPENXML_WORD_MIME\\@|\\;application/vnd.ms-word.document.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.document\\;application/vnd.ms-word.template.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.template|" base.desktop.in > base.desktop
../intltool-merge ../po calc.desktop.in.in calc.desktop.in -d -u -c ../po/.intltool-merge-cache
Found cached translation database
Merging translations into calc.desktop.in.
sed -e "s|\\@OOO_BINSUFFIX\\@||" \\
\t -e "s|\\@STARTUPNOTIFY\\@|@STARTUPNOTIFY@|" \\
\t -e "s|\\@ADD_OPENXML_PRESENTATION_MIME\\@|;application/vnd.ms-powerpoint.slideshow.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.slideshow;application/vnd.ms-powerpoint.presentation.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.presentation;application/vnd.ms-powerpoint.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.template|" \\
\t -e "s|\\@ADD_OPENXML_SPREADSHEET_MIME\\@|;application/vnd.ms-excel.sheet.binary.macroEnabled.12;application/vnd.ms-excel.sheet.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.sheet;application/vnd.ms-excel.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.template|" \\
\t -e "s|\\@ADD_OPENXML_WORD_MIME\\@|\\;application/vnd.ms-word.document.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.document\\;application/vnd.ms-word.template.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.template|" calc.desktop.in > calc.desktop
../intltool-merge ../po draw.desktop.in.in draw.desktop.in -d -u -c ../po/.intltool-merge-cache
Found cached translation database
Merging translations into draw.desktop.in.
sed -e "s|\\@OOO_BINSUFFIX\\@||" \\
\t -e "s|\\@STARTUPNOTIFY\\@|@STARTUPNOTIFY@|" \\
\t -e "s|\\@ADD_OPENXML_PRESENTATION_MIME\\@|;application/vnd.ms-powerpoint.slideshow.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.slideshow;application/vnd.ms-powerpoint.presentation.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.presentation;application/vnd.ms-powerpoint.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.presentationml.template|" \\
\t -e "s|\\@ADD_OPENXML_SPREADSHEET_MIME\\@|;application/vnd.ms-excel.sheet.binary.macroEnabled.12;application/vnd.ms-excel.sheet.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.sheet;application/vnd.ms-excel.template.macroEnabled.12;application/vnd.openxmlformats-officedocument.spreadsheetml.template|" \\
\t -e "s|\\@ADD_OPENXML_WORD_MIME\\@|\\;application/vnd.ms-word.document.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.document\\;application/vnd.ms-word.template.macroEnabled.12\\;application/vnd.openxmlformats-officedocument.wordprocessingml.template|" draw.desktop.in > draw.desktop
../intltool-merge ../po impress.desktop.in.in impress.desktop.in -d -u -c ../po/.intltool-merge-cache
Found cached translation database
Merging translations into impress.desktop.in.
sed -e "s|\\@OOO_BINSUFFIX\\@||" \\
\t -e "s|\\@STARTUPNOTIFY\\@|@STARTUPNOTIFY@|" \\
...
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
ERROR: No Fallback found for language en-US:
.ERROR: No Fallback found for la

Tags: pet-bug
Revision history for this message
Ian Jackson (ijackson) wrote : Re: [Bug 151573] autopkgtest gutsy openoffice.org: erroneous package!

Ian Jackson autopkgtest writes ("[Bug 151573] autopkgtest gutsy openoffice.org: erroneous package!"):
> Test executed for: gutsy source openoffice.org
> Outcome: erroneous package!
> blame: arg:tmp/openoffice.org/src/openoffice.org_2.3.0-1ubuntu2.dsc dsc:openoffice.org
> badpkg: rules binary failed with exit code 2
> quitting: erroneous package: rules binary failed with exit code 2
...
> ERROR: No Fallback found for language en-US:
> ERROR: No Fallback found for language en-US:
> make[1]: *** [debian/stampdir/gsi-export-en-US] Terminated
> make[1]: *** Waiting for unfinished jobs....
> make[1]: *** [debian/stampdir/gsi-export-as-IN] Terminated

This was the result of me manually sending the test run a SIGTERM.

The build was failing in the same way as reported in bug 149021. I
will mark the other bug as a duplicate of this one to make LP's
duplicate handling work less badly for autopkgtest's screen scraper (!)

Ian.

Changed in openoffice.org:
status: New → Confirmed
Chris Cheney (ccheney)
Changed in openoffice.org:
importance: High → Low
status: Confirmed → In Progress
Chris Cheney (ccheney)
Changed in openoffice.org:
status: In Progress → Confirmed
Chris Cheney (ccheney)
Changed in openoffice.org:
status: Confirmed → Triaged
Chris Cheney (ccheney)
Changed in openoffice.org:
assignee: nobody → ccheney
milestone: none → jaunty-alpha-1
Chris Cheney (ccheney)
Changed in openoffice.org:
milestone: jaunty-alpha-1 → ubuntu-9.04-beta
Revision history for this message
Chris Cheney (ccheney) wrote :

I think this is probably fixed as it builds fine for me and the buildds. I am not sure how to replicated the autopkgtest build so if this is still a problem then I need to determine how to run this test myself to look into it.

Changed in openoffice.org:
assignee: ccheney → nobody
milestone: ubuntu-9.04-beta → none
status: Triaged → Fix Released
Chris Cheney (ccheney)
Changed in openoffice.org:
assignee: nobody → ccheney
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Duplicates of this bug

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.