I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
WORKAROUND: Don't install bumblebee.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:
apport-collect 1327598
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the Ubuntu Kernel Team.